ProSense DPM1 Series 1/32 DIN Digital Panel Meters

1-800-633-0405 | www.automationdirect.com

Overview

These models in the ProSense DPM1 series offer a simple, low-cost digital display of analog process signals. The 4-digit red LED display is easily scaled into any engineering units from -1999 to 9999 with a selectable decimal point location. Two-point direct or reverse acting linear scaling values can be entered manually or by introducing actual sensed process values in Teach mode. Additionally, non-linear processes can be scaled by entering up to 16 scaling points. Two SPST relay outputs are included that can be set to activate on an increasing or decreasing input signal with hysteresis or time delay operation. Models are also available with a 0/4-20mA analog output.

The meter is powered from an external AC or DC power supply and provides 20VDC for external sensor excitation. The 1/32 DIN housing takes up minimal panel space, and the meter face has an IP65 rating. Configuration parameters can be totally or selectively locked out to prevent unauthorized or accidental changes to the meter's operation. Other features include memory and reset of minimum and maximum display values, a tare function, filtering to minimize display bounce, and display brightness adjustment. ProSense digital panel meters are backed by a 3-year warranty.

Features

48 x 24mm 1/32 DIN
Simple menu-driven pushbutton configuration
8mm 4-digit (-1999 to 9999) red LED display
Selectable decimal point
Process input (±10V, ±60V, ±100mV, ±20mA)
AC or DC powered
Sensor excitation voltage 20V
(2) Form A SPST normally open relays: Activation on increasing or decreasing input signal, Hysteresis or time delay operation
0/4-20mA analog output on select units
Total or selective configuration lock out
Display scaling or process teaching modes
Configuration for direct or reverse acting linear processes and up to 16 point non-linear processes
Minimum and maximum value memory
Tare function
Filtering to minimize display bounce
Display brightness adjustment
3 year warranty

DPM1 Series Panel Meters

Model	Description	Weight (lbs)	Price
DPM1-A-2R-H	ProSense digital panel meter, 1/32 DIN, 8mm 4-digit red LED, input current signal range(s) of +/- 20 mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 85 to 265 VAC / 100 to 300 VDC operating voltage.	0.3	$103.00
DPM1-A-2R-L	ProSense digital panel meter, 1/32 DIN, 8mm 4-digit red LED, input current signal range(s) of +/- 20 mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 21 to 53 VAC / 10.5 to 70 VDC operating voltage.	0.3	$103.00
DPM1-A-A2R-H	ProSense digital panel meter, 1/32 DIN, 8mm 4-digit red LED, input current signal range(s) of +/- 20 mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, output current signal range(s) of 0/4-20 mA, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 85 to 265 VAC / 100 to 300 VDC operating voltage.	0.3	$113.00
DPM1-A-A2R-L	ProSense digital panel meter, 1/32 DIN, 8mm 4-digit red LED, input current signal range(s) of +/- 20 mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, output current signal range(s) of 0/4-20 mA, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 21 to 53 VAC / 10.5 to 70 VDC operating voltage.	0.3	$113.00

Technical Specifications

Range	Resolution	Input Impedance	Accuracy
±10V	1mV	1MΩ	±(0.1% rdg+3mV)
±60V	3mV	1MΩ	±(0.1% rdg+18mV)
±100mV	10μν	100ΜΩ	±(0.1% rdg+30µV)
±20mA	1μΑ	12.1Ω	±(0.1% rdg+6µA)

Sensor Excitation	20V±5VDC @ 30mA
Accuracy Conditions	Temperature coefficient	100ppm/°C
	Warm-up time	15 minutes
	Temperature	23°C±5°C
Conversion	Technique	Sigma-Delta
	Resolution	±15 bits
	Conversion rate	25 times per second
Display	Range	-1999 to +9999, selectable decimal point position
	Type	4-digit 8mm (0.31"), red LED
	Display refresh rate	Relay 1, Relay 2, Tare, Programming Mode
	Display / Input overrange indication	"-QUE", "+QUE"
Relays
	Relays refresh, maximum and minimum value	10s
		2 Relays (Form A) SPST normally open
	Resolution	5A@250VAC/30VDC
Analog Output (0/4-20mA Sourcing) (Models DPM1-A-A2R-H & DPM1-A-A2R-L only)	Accuracy	±5.5μΑ
	Temperature coefficient	±(0.3% rdg+40µA)
	Maximum load	3μΑ/°C
	Cutoff frequency	<500Ω
Power Supply and Fuses	(Models DPM1-A-2R-H, DPM1-A-A2R-H)	85-265VAC 50/60Hz or 100-300VDC (Recommended fusing 0.2A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
	(Models DPM1-A-2R-L, DPM1-A-A2R-L)	21-53VAC 50/60Hz or 10.5-70VDC (Recommended fusing 1.0A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
Filter	Slope	20dB/Dec.
	Operating temperature	-10°C to +60°C (14°F to 140°F)
	Storage temperature	-25°C to +85°C (-13°F to 185°F)
Environmental Conditions	Relative humidity (non condensing)	<95% @ 40°C (104°F)
	Maximum altitude	2000m
	Frontal protection degree	IP65
Environmental Air		No corrosive gases permitted
Agency Approvals		CE

Wiring

CN1: AC Supply, DC Supply

1: +60V/+10VDC
2: +20mA DC
3: +100mV
4: -IN/-Excitation

CN2: DC Supply

1: -VDC
2: +VDC

CN3*: Analog output terminals (DPM1-A-A2R-H & DPM1-A-A2R-L only)

1: -0/4-20mA
2: +0/4-20mA

CN4: Relay 1

1: N.O. Contact
2: Common

CN5: Relay 2

1: N.O. Contact
2: Common

CN2 and CN3 Terminals

Insertion Tool (included with meter): Insert wires into the proper terminal while using the insertion tool to open the clip inside the connector. Release the insertion tool to fix wire to the terminal.

CN1, CN4 and CN5 Terminals

Dimensions

Dimensions (mm [inches])

Panel Cutout: 45 x 22mm (Max. panel thickness 7mm)

Case Material: Polycarbonate UL 94 V-0

Installation

Programming Keys (Bottom View)

ENTER: Enters configuration and validates data and parameters.
SHIFT: Selects mode or shifts blinking digit in configuration.
UP: Increases value of blinking digit in configuration.

Insert

Scan or click the above QR code to be taken to the DPM1-A-2R and DPM1-A-A2R Series Quick Start Guide.

Manual

Scan or click the above QR code to be taken to the DPM1-A-2R and DPM1-A-A2R Series Manual.

Product Line Overview

The ProSense DPM family of digital panel meters includes both 1/32 DIN and 1/8 DIN meter sizes with simple menu-driven pushbutton configuration. A wide variety of input signals can be accepted for process, temperature, load cell, voltage, current, pulse, frequency, and other applications. Available output options include alarm relays, analog signal retransmission, and sensor excitation voltage. Backed by a 3-year warranty, ProSense digital panel meters offer outstanding features and performance at an incredible price point.

DPM Series Digital Panel Meters Process Input Selection Guide

Model	Size	Display	Inputs	Outputs	Power	Price
DPM1-A-LP		10mm, Red LED*, -1999 to 9999 Selectable decimal point	4-20mA	None	Loop Powered	$72.00
DPM1-A-H			±20mA, ±100mV ±10V, ±20V		85-265 VAC, 50/60 Hz 100-300 VDC	$93.00
DPM1-A-L	1/32 DIN		+200V		21-53 VAC, 50/60 Hz 10.5-70 VDC	$93.00
DPM1-T-H		10mm, Red LED, -1999 to 9999 RTD Pt100 (3-wire) TC Type J, K, T or N			85-265 VAC, 50/60 Hz 100-300 VDC	$93.00
DPM1-T-L					21-53 VAC, 50/60 Hz 10.5-70 VDC	$93.00
DPM1-A-2R-H		8mm, Red LED, -1999 to 9999 Selectable decimal point	±20mA, ±100mV ±10V, ±60V	2 Relays Form A SPST Normally Open	85-265 VAC, 50/60 Hz 100-300 VDC	$103.00
DPM1-A-2R-L					21-53 VAC, 50/60 Hz 10.5-70 VDC	$103.00
DPM1-A-A2R-H				2 Relays Form A SPST Normally Open	85-265 VAC, 50/60 Hz 100-300 VDC	$113.00
DPM1-A-A2R-L					21-53 VAC, 50/60 Hz 10.5-70 VDC	$113.00
DPM2-AT-HL		DPM2: 14mm, Red LED, -9999 to 9999 DPM2L: 20mm, Red LED, -1999 to 9999 Selectable decimal point	±20mA, ±10V +200V, 100-100k Ohm potentiometer, 1k-50k Ohm resistance, RTD Pt100 (3-wire) RTD Pt1000 (4-wire) TC Type J, K, T or N	None	85-265 VAC, 50/60 Hz 100-300 VDC	$109.00
DPM2L-AT-HL					21-53 VAC, 50/60 Hz 10.5-70 VDC	$117.00
DPM2-AT-2R-HL				2 Relays Form C SPDT	85-265 VAC, 50/60 Hz 100-300 VDC	$119.00
DPM2L-AT-2R-HL					21-53 VAC, 50/60 Hz 10.5-70 VDC	$127.00
DPM3-AT-H	1/8 DIN			None	85-265 VAC, 50/60 Hz 100-300 VDC	$135.00
DPM3-AT-2R-H				2 Relays Form C SPDT	21-53 VAC, 50/60 Hz 10.5-70 VDC	$152.00
DPM3-AT-4R-H		14mm, Red, Green, Amber LED -19999 to 39999 Selectable decimal point ±20mA, ±10V RTD Pt100 (3-wire) TC Type J, K, T or N Load Cell ±15mV, ±30mV, +150mV Potentiometer	4 Relays Form A Normally Open with shared common	85-265 VAC, 50/60Hz 100-300 VDC	$152.00
DPM3-AT-A-H			4-20mA	None	21-53 VAC, 50/60Hz 10.5-70 VDC	$164.00
DPM3-AT-A2R-H				2 Relays Form C SPDT	85-265 VAC, 50/60Hz 100-300 VDC	$152.00
DPM3-AT-L					21-53 VAC, 50/60Hz 10.5-70 VDC	$169.00
DPM3-AT-2R-L				2 Relays Form C SPDT	85-265 VAC, 50/60Hz 100-300 VDC	$135.00
DPM3-AT-4R-L			4-20mA	None	21-53 VAC, 50/60Hz 10.5-70 VDC	$152.00
DPM3-AT-A-L				2 Relays Form C SPDT	85-265 VAC, 50/60Hz 100-300 VDC	$164.00
DPM3-AT-A2R-L					21-53 VAC, 50/60Hz 10.5-70 VDC	$152.00

DPM Series Digital Panel Meters Electrical Input Selection Guide

Model	Size	Display	Inputs	Outputs	Power	Price
DPM1-E-H	1/32 DIN	10mm, Red LED, -1999 to 9999 Selectable decimal point	100/600 VAC or VDC 1A/5A AC or DC	None	85-265 VAC, 50/60 Hz 100-300 VDC	$93.00
DPM1-E-L					21-53 VAC, 50/60Hz 10.5-70 VDC	$93.00
DPM2-E-HL		14mm, Red LED, -9999 to 9999 600/200/20 VAC or VDC 1A/5A/shunt 60mV / shunt 100mV AC or DC	None	20-265 VAC, 50/60 Hz 11-265 VDC	$109.00
DPM2-E-2R-HL			2 Relays Form C SPDT		$119.00
DPM3-E-H	1/8 DIN	14mm, Red, Green, Amber LED -19999 to 19999 Selectable decimal point 600/200/20/2 VAC True RMS or VDC 1A/5A/shunt 50mV / shunt 60mV/shunt 100mV AC True RMS or DC	None	85-265 VAC 100-300 VDC	$150.00
DPM3-E-A2R-H			2 Relays Form C SPDT 4-20mA		$178.00
DPM3-E-L			None	22-53 VAC 10.5-70 VDC	$150.00
DPM3-E-A2R-L			2 Relays Form C SPDT 4-20mA		$178.00

DPM Series Digital Panel Meters Pulse, Frequency Input Selection Guide

Model	Size	Display	Inputs	Outputs	Power	Price
DPM1-P-H	1/32 DIN	10mm, Red LED, 0 to 9999 Selectable decimal point	7kHz (tachometer rpm or rate modes) 9999Hz (frequency meter mode)	None	85-265 VAC 100-300 VDC	$93.00
DPM1-P-L					21-53 VAC 10.5-70 VDC	$93.00
DPM1-P-A2R-H		8mm, Red LED, 0 to 9999 Selectable decimal point	12kHz (tachometer rpm or rate modes) 9999Hz (frequency mode) 100Hz (duty/PWM mode)	2 Relays Form A SPST Normally Open 4-20mA	85-265 VAC 100-300 VDC	$113.00
DPM1-P-A2R-L					21-53 VAC 10.5-70 VDC	$113.00
DPM2-P-HL	1/32 DIN		7.5 kHz (counter mode) 25kHz (tachometer rpm or rate modes)	None	20-265 VAC 11-265 VDC	$109.00
DPM2-P-2R-HL			2 Relays Form C SPDT 4-20mA		$119.00
DPM3-P-H	1/8 DIN	14mm, Red LED, 0 to 9999, 0 to 999999 Totalizer Selectable decimal point	19kHz (without totalizer) 9.9 kHz (with totalizer)	None	85-265 VAC 100-300 VDC	$135.00
DPM3-P-A2R-H			2 Relays Form C SPDT 4-20mA		$169.00
DPM3-P-L		14mm Red, Green, Amber LED -99999 to 99999, -9999999 to 99999999 Totalizer Programmable decimal point		None	22-53 VAC 10.5-70 VDC	$135.00
DPM3-P-A2R-L			2 Relays Form C SPDT 4-20mA		$169.00

	ProSense DPM1 Series 1/32 DIN Digital Panel Meters \| Automation Direct Discover the ProSense DPM1 Series 1/32 DIN digital panel meters, offering precise measurement of analog process and DC voltage signals. Features include a 4-digit red LED display, selectable decimal points, versatile input ranges, and robust IP65 front panel protection. Ideal for industrial applications.
	ProSense DPM1 Series 1/32 DIN Digital Panel Meters \| Temperature Measurement Discover the ProSense DPM1 Series 1/32 DIN digital panel meters for accurate temperature monitoring. Featuring a 4-digit LED display, RTD/Thermocouple inputs, IP65 rating, and a 3-year warranty. Ideal for industrial automation.
	ProSense DPM Series Digital Panel Meters: Features, Specifications, and Selection Guide Explore the ProSense DPM Series of 1/32 DIN and 1/8 DIN digital panel meters. This guide details features, technical specifications, input/output options, and selection criteria for frequency, tachometer, rate, and PWM applications.
	ProSense DPM3-P Series 1/8 DIN Digital Panel Meters The ProSense DPM3-P series digital panel meters offer a simple, feature-packed solution for counter, chronometer, frequency, tachometer, rate, and pulse width modulated (PWM) applications. These 1/8 DIN meters feature a 5-digit tri-color LED display, selectable decimal points, and accept various input types including AC voltage, magnetic sensors, NPN/PNP sensors, NAMUR sensors, TTL/24V encoders, and switched contacts. They are available with optional dual SPDT relay outputs and a 4-20mA analog output. The meters are powered by an external AC or DC supply and feature an IP65 rated front panel. Configuration parameters can be locked to prevent unauthorized changes. The series is backed by a 3-year warranty.
	ProSense DPM4 Advanced High Speed Process Panel Meters User Manual User manual for the ProSense DPM4 Advanced High Speed Process Panel Meters, covering installation, operation, programming, and technical specifications. Includes details on input configuration, output options, and troubleshooting.
	ProSense FMM Series (-1001) Magnetic-Inductive Flow Meters AutomationDirect's ProSense FMM Series (-1001) Magmeters are designed for reliable flow rate detection of conductive media up to 160 GPM. These stainless steel, mechanically-robust meters offer in-line mounting, a 4-digit numeric display with pushbutton setup, and selectable engineering units. They feature two outputs for remote monitoring of binary or analog status, and are a reliable alternative to traditional flow meters.
	ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters Explore the ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters, designed for reliable liquid flow rate detection. This document provides an overview, features, specifications, and selection guides for these robust and compact flow meters.
	ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters Automation Direct's ProSense FMM Series (-1002) Magmeters offer reliable detection of conductive liquid flow rates up to 158.5 GPM. These compact, stainless steel meters feature a 4-digit display, selectable engineering units, and two analog outputs for remote monitoring of flow and temperature. They are suitable for various industrial process applications.