DAGNAR Children's Desk Chair Assembly Instructions
This document provides assembly instructions for the IKEA DAGNAR children's desk chair.
Brand: IKEA
Product Code: AA-2356797-4
Assembly Instructions
General Guidance
Important: Please review all steps and ensure you have all parts before beginning assembly. ?
Surface Protection: Assemble on a soft surface like a rug to prevent scratching the floor or chair components. ✔️ Avoid assembling on hard or delicate surfaces. ❌
Preparation: Verify all parts against the parts list and read through the instructions carefully. ❓
Parts List
- 2x Allen Keys (Part Numbers: 124345, 100092)
- 2x Screws (Part Number: 152545)
- 4x Screws (Part Number: 105103)
- 2x Washers (Part Number: 100843)
- 2x Washers (Part Number: 100854)
- 4x Casters/Wheels (Part Numbers: 10098488, 10098490)
- 1x Seat Mechanism Connector/Bracket (Part Number: 10091633)
Step 1: Attach Casters
Insert the four casters into the sockets on the five-star base. Push each caster firmly until it clicks into place. Ensure a secure fit. ? [Visual: Four casters being inserted into a five-star base, with a 'Click!' indicator.]
Step 2: Assemble Base and Gas Lift
Insert the gas lift cylinder into the center of the five-star base. Secure the central bracket (10091633) to the base using two screws (152545) and two washers (100843), and two screws (105103) and two washers (100854). ❌ [Visual: Incorrect assembly method shown with a cross.] ✔️ [Visual: Correct assembly method shown.] [Visual: Screws and washers being attached to the base.]
Step 3: Attach Seat Mechanism
Attach the seat mechanism bracket to the gas lift column. Tighten the adjustment knob to secure it. ⚙️ [Visual: A person tightening a knob to attach a bracket to a column.]
Step 4: Attach Seat
Place the seat onto the attached mechanism. Tighten the adjustment knob to secure the seat. ⚙️ [Visual: A person placing the seat onto the mechanism and tightening a knob.]
Step 5: Attach Backrest Support
Attach the backrest support column to the seat mechanism using four screws (105103) and the Allen key (100092). ?️ [Visual: Screws and an Allen key being used to attach the backrest support.]
Step 6: Attach Backrest
Attach the backrest to the support column. Tighten the adjustment knobs to secure the backrest. ⚙️ [Visual: A person tightening knobs to attach the backrest.]
Step 7: Install Adjustment Knob
Insert the height adjustment knob into its designated slot until it clicks. ✅ [Visual: A knob being inserted into a slot with a 'Click!' indicator.] Avoid incorrect insertion. ❌ [Visual: Incorrect insertion shown with a cross.]
Step 8: Final Component Attachment
Attach the final component (e.g., handle or cap) to the adjustment knob. Push until it clicks into place. ✅ [Visual: A component being attached to a knob with a 'Click!' indicator.]
Usage and Adjustments
ℹ️ Important Usage: Use the chair in an upright position. Do not kneel or sit improperly. ❌ [Visual: Incorrect usage shown with a cross.]
⚙️ Seat Height Adjustment: Use the lever or knob to adjust the seat height. The diagram indicates height ranges, for example, 145cm and 135cm. [Visual: Lever/knob for height adjustment, with height markers.] ? [Visual: Locked position indicator.] ? [Visual: Unlocked position indicator.]
⚙️ Seat Depth/Tilt Adjustment: Use the designated knobs to adjust the seat depth and tilt for ergonomic comfort. [Visual: Knobs for seat depth and tilt adjustment.]