Selfie Stick User Manual

Product Components

The Selfie Stick is designed with several key components for versatile use:

• ① Phone Clip: A secure mount for your smartphone, capable of 360-degree rotation for optimal viewing angles.
• ② Telescopic Shaft: Allows the selfie stick to extend and retract freely, adjusting its length as needed.
• ③ Indicator Light: Provides visual feedback on the device's operational status, such as Bluetooth connectivity.
• ④ Built-in Tripod: The base of the selfie stick can be unfolded to create a stable tripod, enabling hands-free operation.
• ⑤ Locking Knob: Used to secure the telescopic shaft at the desired extension length.
• ⑥ Remote Control: A detachable Bluetooth remote for wireless operation of the camera.
• ⑦ Shutter Button: The primary button on the remote control used to capture photos or videos.
• ⑧ Fill Light (Optional): An integrated light source that can be turned on/off and adjusted for different lighting modes. It features a charging port, typically Micro-USB, for recharging.

Note: The Fill Light feature is an optional addition and may not be present on all models. Please consult the specifications of your purchased product.

Bluetooth Remote Control Operation

The detachable Bluetooth remote control enhances your photography experience by allowing wireless shutter activation.

Pairing the Remote Control:

1. On your smartphone, navigate to the Bluetooth settings and enable Bluetooth.
2. Press and hold the shutter button on the remote control for approximately 2 seconds until the indicator light begins to flash, indicating it is powered on and ready for pairing.
3. On your smartphone's list of available Bluetooth devices, locate and select "VIPsy". Tap to pair or connect.
4. Once paired, open your smartphone's camera application. Press the shutter button on the remote to take photos or to start and stop video recording.
5. To power off the remote control, press and hold the shutter button for approximately 3 seconds until the indicator light extinguishes.

Compatibility: This Bluetooth remote control is compatible with devices running Android 4.3 and iOS 5.0 or later operating systems.

Replacing the Remote Control Battery

The Bluetooth remote control is designed for easy battery replacement. There are two common types of battery covers:

Type 1: Covering Type

1. Locate the groove on the side of the remote control. Use a fingernail or a suitable tool to gently pry open the upper shell at this point.
2. Remove the old battery and insert a new one, ensuring correct polarity.
3. Carefully snap the shell back into place to secure the battery compartment.

Type 2: Sliding Type

1. Identify the back cover of the remote control. Slide it in the direction indicated by the arrow shown in the product diagrams.
2. Remove the old battery and insert a new one, observing the correct polarity.
3. Slide the back cover back onto the remote until it is securely in place.

Important: When replacing the battery, always ensure the positive pole (+) is oriented outwards. Do not insert the battery with reversed polarity.

Troubleshooting Common Issues

• Issue: Bluetooth connection failure.
  • First, delete the existing "VIPsy" Bluetooth pairing from your smartphone's settings.
  • Restart the remote control by turning it off and on again.
  • Initiate the pairing process from Step 1 in the "Pairing the Remote Control" section.
• Issue: Shutter button does not function on Android devices.
  • Open your smartphone's camera application.
  • Access the camera settings and locate the option for "Volume button function". Change this setting to "Default" or "Shutter". This configuration allows the volume buttons, and consequently the remote's shutter button, to control camera actions.

Important Safety Information and Precautions

• Avoid storing the product in environments characterized by low temperatures or high humidity.
• Protect the product from direct sunlight and excessive heat.
• When replacing the battery, ensure the positive pole (+) is oriented outwards. Do not insert the battery with reversed polarity.
• This product contains a battery. Keep it out of the reach of young children to prevent accidental ingestion.
• Refrain from using the product in restricted areas where its operation might contravene public order or regulations.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.