Selfie Stick User Manual

Getting Started: How to Use

Follow these steps to set up and use your Selfie Stick:

1. Power On: Slide the power button upwards to turn the device on.
2. Bluetooth Pairing:
   • The indicator light will flash quickly for 4 seconds to enter pairing mode.
   • On your mobile phone, search for "Selfie" to find and connect to the device.
   • The indicator light will turn off upon successful pairing.
3. Taking Pictures/Videos: When the remote and phone are connected, short-press the photo button. The indicator light will flash.
4. No Pairing Auto-Off: If no pairing or connection is made after powering on, the device will automatically shut down after 5 minutes of inactivity.
5. Sleep/Auto-Off: When connected to a phone, the device enters a sleep state after 10 minutes of inactivity. It will automatically shut down after another 10 minutes of inactivity.
6. Power Off: In the powered-on or sleep state, slide the power button downwards to turn the device off. The indicator light will flash and then turn off.

Key Functions

Use after detaching the remote and connecting your phone.

• Power Button:
  • [indicator light on]: Powers the device on.
  • [indicator light off]: Powers the device off.
• Photo Button:
  • Click: Takes pictures or starts/stops video recording.

Features and Operation

Detaching the Remote: Pull the telescopic rod out first, then slide the remote upwards to detach it.

Clipping Your Phone: Use one end of your phone to push the phone clip upwards, opening it to insert your device.

Opening the Tripod: The tripod legs are located at the bottom of the handle. Flip them outwards to deploy the tripod.

Adjusting Angles: The selfie stick allows for various angle adjustments for optimal shooting positions.

Extendable Pole: The pole is designed to be extended and is stable for use.

Specifications

• Main Material: Stainless steel + ABS
• Folded Length: 210mm
• Extended Length: 1130mm
• Product Dimensions: 210mm x 55mm x 35mm
• Product Weight: 200g
• Remote Control Battery: CR1632 (Replaceable)

Note: Batteries must not be exposed to direct sunlight, fire, or similar excessive heat.

Compatibility and Reminders

Compatibility: The selfie stick is compatible with Android 4.4 and above, and iOS 5.0 and above.

Android Device Reminder: If you have changed your phone's camera volume key function, please revert it to the default setting (or set it to "take picture") for the selfie stick to function correctly.

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Certifications: FC, CE, RoHS