Bluetooth Selfie Stick User Manual
Thank you for your support!
Selfie Stick Features
- Phone Clip: Can be rotated 360 degrees.
- Telescopic Shaft: Can be stretched freely.
- Bluetooth Remote Control: Detachable.
- Built-in Tripod: The grip can be unfolded into a stable tripod.
- Fill Light (Optional): Features a power button to turn on/off and change lighting modes.
- Charging Port: For charging the device.
Note: The fill light is an optional feature for some models. Please refer to the specific model purchased.
Detachable Bluetooth Remote
Mounting and Removing the Remote
- Take out: [Illustration of removing the remote]
- Mount: [Illustration of mounting the remote]
Quick Steps for Remote Use
- Step 1: On your phone, tap Settings > Bluetooth, and turn on Bluetooth.
- Step 2: Hold down the shutter button (approx. 2 seconds) until the indicator light flashes to turn on the remote control.
- Step 3: Once the Bluetooth name "Selfie" appears on your phone's display, select it and tap "pair".
- Step 4: Press the Shutter button to take photos or videos.
- Step 5: Hold down the shutter button (approx. 3 seconds) until the indicator light goes out to turn off the remote control.
Compatibility: The remote control is compatible with Android 4.3, iOS 5.0, and later versions.
Battery Replacement
Note: The Bluetooth remote control has two types. Please follow the corresponding steps for your purchased model.
1. Covering Type
Use a tool (like a plastic thin piece or fingernail) to pry open the upper shell from the side groove of the remote. Replace the battery, then reattach the upper shell.
2. Sliding Type
Slide the back cover in the direction of the arrow as shown in the diagram. Replace the battery, and then slide the cover back into place.
Troubleshooting
- Remote won't turn on: Replace with a new battery.
- Remote won't connect or function after turning on: Delete the Bluetooth pairing on your phone, reboot the remote, and try pairing again.
- Android phone can't take photos with the remote:
- Scenario I: Pressing the shutter button adjusts volume. Open the camera app and change the "Volume button function" setting to "Default" or "Shutter".
- Scenario II: Pressing the shutter button does nothing. Follow the steps for Scenario 1 (re-pairing the remote).
Attention
- Do not store the product in icy or damp environments.
- Do not expose the product to extreme heat, such as direct sunlight or fire.
- When replacing the battery, ensure the positive pole (+) of the battery faces outwards. Do not reverse the polarity.
- This product contains a battery. Keep it out of reach of infants and young children to prevent accidental ingestion.
- Do not use the product in restricted areas where its use might violate public order or regulations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Related Documents
![]() |
Bluetooth Selfie Stick User Manual and Troubleshooting Guide Comprehensive guide for the Bluetooth selfie stick, covering setup, features, battery replacement, and troubleshooting. Includes FCC compliance information. |
![]() |
Selfie Stick User Manual and FCC Statement Comprehensive user manual for the Selfie Stick, detailing product features, operation, fault resolution, and safety precautions. Includes FCC compliance information and RF exposure guidelines. |
![]() |
Selfie Stick User Manual with Bluetooth Remote and Fill Light User guide for the Selfie Stick, covering setup, Bluetooth remote pairing, battery replacement, troubleshooting, and FCC compliance. Features include a tripod, fill light, and detachable remote. |
![]() |
Selfie Stick User Manual with Detachable Remote Comprehensive user manual for the Selfie Stick, detailing its features, operation, troubleshooting, and safety precautions. Includes instructions for the detachable Bluetooth remote and optional fill light. |
![]() |
Selfie Stick User Manual: Extendable Monopod with Bluetooth Remote & Tripod Detailed user guide for the extendable Selfie Stick, covering setup, Bluetooth pairing, remote operation, tripod functionality, specifications, and compatibility for iOS and Android devices. Includes FCC compliance information. |
![]() |
Selfie Stick L16 User Manual User manual for the Selfie Stick L16, detailing its components, usage instructions, key functions, compatibility, and specifications for mobile photography and videography. |
![]() |
CL18 Selfie Stick: Integrated Hidden Follow-Up Design - User Guide User guide for the CL18 selfie stick, featuring an integrated hidden follow-up design. Includes information on available English and Chinese tutorials for setup and operation. |