Bluetooth Selfie Stick User Manual

Product Overview

This manual provides instructions for the Bluetooth selfie stick, including its features, operation, and troubleshooting.

Key Components:

• ① Phone Clip
• ② Telescopic Shaft
• ③ Indicator Light
• ④ Built-in Tripod
• ⑤ Fixing Knob
• ⑥ Bluetooth Remote Control
• ⑦ Shutter Button
• ⑧ Fill Light (optional)

Features:

• The Phone Clip can be rotated 360 degrees.
• The telescopic shaft can be stretched freely.
• The Bluetooth remote control is detachable.
• The grip can be unfolded into a stable tripod.

Fill Light (Optional):

• Charging Port
• Power Button: Turn on/off the light; Change the lighting mode.
• Charging with Micro-USB Cable.

Reminder: The fill light is assembled for some models. Please refer to the model of the purchased product.

Detachable Remote

Quick Steps for Remote:

1. On your phone, tap Settings > Bluetooth, and then turn on the Bluetooth.
2. Hold down the shutter button (about 2s) until the indicator light starts flashing to turn on the remote control.
3. Once the Bluetooth name of "Selfie" appears in the display, select it and tap "pair".
4. Press the Shutter button to take photos.
5. Hold down the shutter button (about 3s) until the indicator light goes out to turn off the remote control.

Reminder: The remote control is compatible with Android 4.3, iOS 5.0 and later.

Replace the Battery

Reminder: The Bluetooth remote control has two types. Please follow the corresponding steps to replace the battery according to the type of your purchased product.

1. Covering Type:

Force apart the upper shell at the groove on the side of the remote with a fingernail or thin tool, then replace the battery, and finally fasten the shell back.

2. Sliding Type:

Slide the back cover in the direction of the arrow as shown, then replace a new battery, and finally insert the cover back.

Troubleshooting

1. If your phone is unable to connect to the remote:
   Delete the Bluetooth pairing on your phone, reboot the remote, and start a new device search.
2. If your Android phone can't take photos when you press the shutter button:
   Open the camera App and change the "Volume button function" to "Default" or "Shutter".
3. If pressing the shutter button does not adjust volume:
   Follow the steps in problem 2 to re-pair the connection.

Attention

• Don't store the product in icy or damp environments.
• Don't place the product in extreme heat or near fire.
• When replacing the battery, place the positive pole "+" of the battery outwards. Do not connect the positive and negative poles in reverse.
• This product contains a battery. Please keep it out of the reach of infants to prevent children from swallowing it by mistake.
• Do not use the product in restricted areas to avoid violating public order.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.