Yaheetech Multi-Level Cat Tree Assembly Instructions
Important Information
Assembly Recommendations:
- People: 1 or more people recommended for installation.
- Time: Estimated assembly time is 1 hour.
- Safety: Not intended for use by children. Keep away from fire or other heat sources. Wearing protective gloves is recommended.
Assembly Precautions: Please follow the instruction manuals and use a pad to avoid damage during assembly. Protect the product and floor during installation.
Parts List
The following parts are included in the package:
- Part 1: Flat panel (x1)
- Part 2: Flat panel with cutout (x1)
- Part 3: Cube-shaped enclosure (x1)
- Part 4: Arched cube-shaped enclosure (x1)
- Part 5: Round perch (x1)
- Part 6: Hanging ball toy (x2)
- Part 7: Rectangular panel (x2)
- Part 8: Rectangular panel (x1)
- Part 9: Tall rectangular panel (x1)
- Part 10: Tall rectangular panel (x1)
- Part 11: Wide rectangular panel (x1)
- Part 12: Hammock (x1)
- Part 13: Short sisal-wrapped post (x1)
- Part 14: Medium sisal-wrapped post (x2) - 40cm
- Part 15: Medium smooth post (x2) - 40cm
- Part 16: Medium sisal-wrapped post (x2) - 35cm
- Part 17: Medium smooth post (x2) - 35cm
- Part 18: Long sisal-wrapped post (x2)
- Part 19: Long smooth post (x1) - 30cm
- Part 20: Extra-long smooth post (x1) - 24.5cm
- Part 21: Extra-long sisal-wrapped post (x1) - 24.5cm
- Part 22: Short smooth post (x4) - 27cm
- Part 23: Short smooth post (x4) - 22cm
- Part 24: Screw for attaching posts (x1)
- Hardware A: Long screws (x8)
- Hardware B: Medium screws (x26)
- Hardware C: Short screws (x3) - 25mm
- Hardware D: Small screws (x8) - 16mm
- Hardware E: L-brackets (x4)
- Hardware F: Wall anchors and screws (x1 set)
- Hardware G: Allen wrench (x1)
Assembly Steps
- Step 1: Assemble the base cubes. Attach part 4 (arched cube) to part 3 (cube) using 16 of hardware B screws. Ensure the posts (23) are inserted into the designated holes.
- Step 2: Attach the vertical supports. Connect two medium posts (14 or 15) to each of the rectangular panels (7) using 4 of hardware B screws per panel.
- Step 3: Assemble the side panels. Attach the tall rectangular panel (10) to the tall rectangular panel (9) using 4 of hardware D screws and 2 of hardware E brackets.
- Step 4: Connect the base structures. Attach the assembled panels from Step 2 to the base structures from Step 1. Use part 8 and part 12 (hammock). Insert posts (16 and 17) and secure with hardware A.
- Step 5: Attach the top perch. Secure part 1 (top panel) to the structure using hardware A and hardware B screws. Part 24 is used for attaching posts.
- Step 6: Add the remaining posts and perches. Attach the round perch (5), sisal-wrapped posts (13, 19, 20, 21), and hanging ball toy (6) using the appropriate screws (A, B, C).
- Step 7: Attach the second tier. Connect the wide rectangular panel (11) to the second tier structure using parts 2 and 9, secured with hardware D screws and hardware E brackets.
- Step 8: Final assembly. Attach the remaining top perch (1) using hardware A and hardware B screws.
- Step 9: Attach the hanging toys and final posts. Secure the hanging ball toys (6) to the structure using hardware B and C. Attach the remaining posts (18) to the structure.
- Step 10: Secure the structure. Use hardware F (wall anchors and screws) to secure the cat tree to the wall for added stability, especially if it is tall or in a high-traffic area.
Customer Support
If you are not entirely satisfied with your purchase, please contact Yaheetech customer support by following these steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
For further assistance, you can download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
