Ecler IG108 In-Ground Speaker
User Manual
Important Warnings
WARNING: RISK OF ELECTRIC SHOCK - DO NOT OPEN
The lightning bolt symbol within an equilateral triangle is intended to alert the user to the presence of dangerous, uninsulated voltage within the apparatus, of a magnitude sufficient to constitute a risk of electric shock to persons.
The exclamation mark symbol within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the information accompanying the product.
WARNING (If applicable): Terminals marked with the symbol "⚡" may be of sufficient magnitude to constitute a risk of electric shock. External wiring connected to the terminals must be installed by qualified personnel or use pre-made cables.
WARNING: To prevent electric shock or fire hazard, do not expose this equipment to rain or humidity.
WARNING: Apparatus with Class I construction must be connected via a grounded plug.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat, including amplifiers.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding-type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Power disconnection: Turning the POWER switch off stops all functions and indicators of the amplifier, but complete disconnection of the apparatus is achieved by disconnecting the power cord from its connector. For this reason, it must always have easy access.
- The equipment is connected to a grounded outlet via the power cord.
- Part of the product labeling is located on the base of the unit.
- This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: This product must not be disposed of as unsorted municipal waste under any circumstances. Please go to the nearest electrical and electronic waste treatment center.
NEEC AUDIO BARCELONA, S.L. disclaims any responsibility for damages that may be caused to persons, animals, or objects due to non-compliance with the above warnings.
Important Note
Thank you for choosing our IG108 floor speaker! To achieve maximum operability and performance, it is VERY IMPORTANT to read and carefully consider the specifications in this manual before connecting the unit.
To ensure optimal performance, we recommend that maintenance be carried out by authorized Technical Services.
All ECLER products have a warranty. Please consult www.ecler.com or the warranty card included with this unit for its validity period and conditions.
Introduction
The ECLER IG108 is a floor-standing, water-resistant (IP65) loudspeaker with an omnidirectional horizontal dispersion pattern (360°). It is ideal for outdoor music and public address applications where a high-quality, reliable sound system is required.
- Outdoor speaker with IP65 rating.
- 8 Ω / 100V operation selector (7.5W, 15W, 30W, 60W).
- 8" Kevlar® woofer and 1" ACCW silk dome tweeter.
- Frequency response (-10 dB): 50 Hz-23 kHz.
- Omnidirectional horizontal dispersion pattern (4 to 6m circular coverage radius per speaker in standard application).
- Available in green (RAL 6005).
Mounting and Installation
The following diagrams illustrate the mounting and installation process for the Ecler IG108 speaker. Ensure all components are securely fastened as shown.
Diagram 1: Assembly Steps
[Illustration showing the assembly of the speaker base and mounting hardware. Components are labeled with quantities like x2 and x8.]
Diagram 2: Installation Options
[Illustration showing the speaker being installed in-ground. One depiction shows a properly prepared base with gravel, and another shows an incorrect installation in water with a prohibition symbol.]
Connection
The IG108 speaker can be connected using either the 8 Ohm or 100V line. The connection terminals are located on the speaker base. Ensure the cable gauge is appropriate (6-10mmØ).
Connection Diagram:
[Illustration showing the connection terminals on the speaker, with labels for N.C. and the power selector switch. A screwdriver is shown engaging the switch.]
Technical Characteristics
Ecler IG108
| System | ||
|---|---|---|
| Effective frequency range¹ | 50 Hz-23 kHz | |
| Coverage angle² | 360°x229° (HxV) | |
| Power handling | 100 W RMS / 400 W Peak | |
| Sensitivity³ | 92 dB (1W/1m) | |
| Maximum SPL⁴ | 112 dB continuous / 118 dB peak | |
| Power options | 100V: 60W / 30W / 15W / 7.5W | 70V: 30W / 15W / 7.5W / 3.75W |
| Recommended amplifier power | 200 W RMS | |
| Transducers | Ways | 2 |
| Low frequency driver | 8" Kevlar woofer | |
| High frequency driver | 1" ACCW silk dome tweeter | |
| Nominal impedance | 8Ω | |
| Physical | ||
| Power type selector | Tap switch | |
| Installation options | In-ground | |
| Environmental | IP65 rated | |
| Operating temperature | Min: -20°C ; -4°F | Max: 70°C; 158°F |
| Storage temperature | Min: -20°C ; -4°F | Max: 70°C; 158°F |
| Included accessories | Security ground bracket | |
| Finished colour | Green (RAL 6005) | |
| Dimensions (ØxD) | 360 x 392.5 mm / 14.17"x15.95" | |
| Weight | 8.5 kg / 18.74 lb |
¹-10dB below the sound pressure level at specified sensitivity
²6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz to 4 kHz.
³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
⁴Calculated from sensitivity and power handling specifications, exclusive of power compression
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in design or manufacturing that may affect the specifications of this product.
For technical inquiries, please contact your supplier, distributor, or complete the contact form on our website, under Support / Technical Consultation. Technical Consultation.
Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
