BroadLink Wi-Fi Universal Remote RM mini 3
Quick Start Guide
Indications
| Status | Indication |
|---|---|
| Flashes quickly (2-3 times/sec) | Device is in smart configuration mode (waiting to be added). |
| Flashes quickly and off alternatively | Device is in AP configuration mode (waiting to be added) |
| Flashes from quickly to slowly then off | Device is being configured and then added to network. |
| Flashes slowly (once / sec) | Device has failed to connect to the network |
| Flash once | IR signal is sent |
Reset for Smart Configuration
Press and hold the reset (on/off) button using a needle for 6s until the LED flashes quickly. DO NOT hold longer than 10s, otherwise it will go to AP configuration mode.
Reset for AP Configuration
In any conditions, press and hold the reset (on/off) button using a needle for 10s until the LED flashes quickly and off alternatively.
FAQs
-
What should I do when I fail to configure the device?
- Make sure your network condition is fully compliant with requirements stated in "Prepare App".
- Make sure there are not too many devices connected to the router (a normal home router can hold no more than 15 devices including phones, computers, smart TVs...).
- Try AP configuration if it is needed.
-
Will others find my devices?
- Only the user added to your home member and assigned with permission can access authorized devices.
Important Notices
- For indoor use in dry environment only.
- Keep clear space with IR appliances.
FCC Radiation Exposure Statement
Contains FCC ID: 2ACDZ-RMMINI3-RM. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
CE RoHS COMPLIANCE
Overview
Unit: mm
RM mini 3
- RM mini 3 x 1
- USB cable x 1
Front:
- LED indicator
Back:
- Reset button
- Power input (Micro USB)
Prepare App
- Download the "BroadLink" App from the App Store or Google Play by searching or scanning the QR code.
- Open the App, sign up an account, and follow the wizard to set up your home for first use.
NOTE:
- Make sure your phone is connected to a 2.4GHz Wi-Fi network before adding the device (5GHz is not supported).
- The Wi-Fi password should contain no more than 32 characters and no special characters which are not available on a standard keyboard layout.
Add Device
- Make sure the device is in configuration mode.
- Power on the device. If it is the first time use, it will be in smart configuration mode automatically; otherwise, you may need to reset it.
- When the device is in smart configuration mode, follow the wizard in the App to add the device, name it, and assign it to a room.
- If you have difficulties adding the device in smart configuration mode, please refer to "Indications" to try AP configuration.
In the device page, tap "Add remote" and follow the wizard to add a virtual remote for your IR or RF device.
If any button is not functional, please select "Learn buttons" from the menu in the remote panel and tap the button to start learning until the button is tested working.
Works with Google/Alexa/IFTTT
- Make sure the device can be remotely controlled from external networks (e.g., 4G).
- In Google/Alexa/IFTTT App, enable the skill/service named "BroadLink", link your account, and discover devices.
NOTE:
- You need to discover devices again in the Alexa App or link your account again in the Google App if the device has been reset.
- The supported regions, languages, and voice control commands are subject to change due to upgrades on skills/services and policies of third-party platforms.
- You can find available voice control commands in the App for supported devices.
Global Hotline
24h x 5 Mon-Fri
North America: +1-40-4476-4482
Europe: +33-4-81-68-12-80
India & UAE: 1800-103-6262 (Toll Free)
Other Asian Countries: +91-1800-103-6262
Latin America: +55-11-4118-4618
Australia & New Zealand: +61-2-4067-5400
