Q-See Q-Go HD Dashcam Manual
Thank you for your purchase of Q-See's Q-Go HD vehicle camera. This device provides confidence and security by automatically recording your trips in full 1080p high definition.
Please read this manual before operating your camera and retain it for future reference.
Technical Specifications
| Screen | 2.7" 4:3 TFT LCD |
|---|---|
| Lens | 140° super wide |
| Languages | English, French, German, Italian, Japanese, Portuguese, Russian, Spanish, Chinese (Simplified/Traditional) |
| Video Size | 1080p/720p/480p |
| Video Format | AVI |
| Photo Resolution | VGA, 3MP, 5MP, 8MP, 12MP |
| Photo Format | JPG |
| Shooting Modes | Single, Self Timer (2, 5, 10 sec), Continuous |
| TV Output | NTSC/PAL |
| USB Port | USB 2.0 |
| Power Supply | 5V 500mA |
| Battery | Built-in (063525PL) |
| Supported OS | Windows 2000/XP/Vista/7,8,10, Macintosh 10.3.6 or above |
Controls and Features
Front View:
- Lens: Captures video footage.
- IR LEDs (4): Infrared LEDs for low-light recording.
- Attachment Point for Bracket: For mounting the camera.
- Speaker: Outputs audio.
- Microphone: Records audio.
- LED Monitor: Indicates device status.
- Red = Off, Charging
- Pink = On, Charging
- Pink/Blue = On, Recording
Bottom/Side View:
- microSD Memory Card Slot: For inserting storage cards.
- USB Port: For data transfer and charging.
- HDMI Output: For connecting to a TV.
- A/V Output: For audio/video output.
- Reset Button: Resets the device.
- [Power Button]: Turns the device on/off.
- [Record/OK Button]: Starts/stops recording or confirms selections.
- [Menu Button]: Accesses menus.
- [Up Button]: Navigates up in menus.
- [Down Button]: Navigates down in menus.
- [Mode Button]: Switches between Video, Snapshot, and Playback modes.
Setup
Charge Battery
Use the included car charger or a USB cable connected to a powered USB port (computer or 5V USB charger) to charge the camera. The camera powers on and begins charging automatically. The internal battery provides approximately 10-15 minutes of charge, so keeping the camera plugged in is recommended.
[Low Power Indicator] [Fully Charged Indicator]
Install microSD Card
The Q-Go HD supports microSD cards up to 32GB. A Class 10 card is recommended for best performance.
- Insert the card into the [microSD Memory Card Slot] as shown. Do not force the card.
- Inserting a card will overwrite any existing data.
- Press gently on the card to eject it for removal.
Power On/Off
The Q-Go HD turns on and begins recording when connected to power (e.g., car charger with ignition on). To turn on manually, press and hold the [Power Button] for 1 second. The [Power/Recording Indicator LED] will glow solid pink. An alternating red/pink indicator signifies recording. To turn off, press and hold the [Power Button] for 3 seconds.
Setup Continued
Setting Time
Correct time settings are crucial for accurate recording timestamps.
- Press the [Menu Button] twice to access the Setup menu.
- Use the [Down Button] to navigate to Date/Time.
- Press the [Record/OK Button] to select Date/Time.
- Use the arrow buttons and [Record/OK Button] to adjust fields and move between them.
- Press the [Menu Button] to exit.
Loop Recording
By default, recordings are saved in one-minute segments. This can be adjusted to two- or three-minute segments, or loop recording can be turned off entirely.
- Press the [Menu Button] once to access the Video menu.
- Use the [Down Button] twice to navigate to Loop Recording.
- Press the [Record/OK Button] to select Loop Recording.
- Use the arrow buttons to choose the desired segment length or to disable loop recording.
- Press the [Menu Button] to exit.
Pressing [Record/OK Button] returns you to the Video or Setup menu.
Other Video and Photo Settings
- Resolution: 1080p/720p/480p (Video), VGA-12MP (Still)
- Exposure: Adjusts brightness.
- Motion Detection On/Off: Records when motion is detected.
- Audio On/Off: Enables/disables audio recording.
- Date Stamp On/Off: Adds date and time to recordings.
- Anti-Shake: Stabilizes still photos.
Other Operational Settings
- Auto Power Off: 0-5 minutes.
- Beep Sound On/Off: Controls button feedback sounds.
- Language: Selects the display language.
- TV Mode: NTSC or PAL.
- GSensor: On/Off. Detects impacts.
- Screensavers: 0-3 minutes.
- Frequency (light): 50/60Hz for lighting compatibility.
- Parking Guard: On/Off. Wakes camera on impact when parked.
- Format: Formats the microSD card.
- Factory Reset: Resets all settings to default.
- Version Info: Displays firmware version.
Additional Video Functions
- Use the arrow buttons to adjust zoom.
- Quickly press and release the [Power Button] to switch to night mode, activating infrared LEDs.
Special Features
- GSensor: Detects impacts and locks the current video to prevent erasure.
- Parking Guard: Uses the GSensor to record footage when an impact is detected while the vehicle is off, using battery power.
- Motion Detection: Records video if movement is detected in front of the camera when the vehicle is off.
Snapshot Mode
- Press the [Mode Button] to switch from Video to Snapshot mode.
- Use the arrow buttons to zoom in or out on the subject.
- Press the [Record/OK Button] to take a picture.
Playback Mode
This mode allows review of video and still photo files.
- Press the [Mode Button] to enter Playback Mode.
- Use the arrow keys to select the desired file.
- Press the [Record/OK Button] to play back the file.
- Press the [Menu Button] to delete or protect a file.
NOTE: Recording must be turned off before switching from Video Mode to Snapshot or Playback modes.
File Backup
- Video files are saved in .AVI format.
- Still images are saved in .JPG format.
- When connected to a computer, the camera may appear as a removable drive. Pressing [Record/OK Button] might be required to enable this on some systems. Files can then be accessed normally.
- On some systems (like Macintosh), you may need a full-size SD card adapter and a USB card reader to access files.
Video Playback on a TV
- Connect the camera to an HDTV using an HDMI cable.
- Select the correct input source on your television.
- The camera can display live or recorded video.
Support
Online technical support is available 24/7 at www.Q-See.com/support.
