Tow-Trust Towbars
Important: Please read General Notes overleaf before fitting
Issue 7
TR818 Renault Master Chassis Cab 1998-2010
Vauxhall Movano Chassis Cab & Pick Up 1998-2010
Parts List
| Item | Qty | Description | Item | Qty | Description |
|---|---|---|---|---|---|
| A | 1 | Towbar | D | 2 | M16 x 50 Bolts, Nuts & S/P Washers |
| B | 1 | Coupling Spacer | E | 4 | M10 x 45 Bolts & S/P Washers |
| C | 1 | R/H & L/H Hand Side Arms | F | 8 | M12 x 40 Bolts, 2 Nuts & 8 S/P Washers |
| G | 4 | 10 x 30 Flat Washers | |||
| H | 10 | 12 x 25 Flat washers |
Installation Instructions
- Remove the two inner bolts securing the towing eye to the left hand chassis (these are no longer required). NOTE: Towing eyes are not always fitted.
- Using Item E with Item G loosely bolt Item A to the existing threaded holes in the side of each chassis.
- Using Item F with Item H loosely bolt Item C to the existing threaded holes in the bottom face of each chassis and to the two holes in Item A.
- Using Item D bolt the ball bracket and wiring plate (not supplied in this kit) to the mounting plate.
- Fully tighten all nuts and bolts and ensure the towbar is rigid and secure.
Diagram Description
The diagram illustrates the Tow-Trust TR818 towbar assembly. It shows the main towbar component (labeled A) with mounting points. Attached to the sides are the left and right-hand side arms (labeled C). A coupling spacer (labeled B) is also shown. Various fasteners are indicated by letters corresponding to the parts list: M16 bolts (D), M10 bolts (E), M12 bolts (F), and flat washers (G, H). The diagram visually represents how these components connect to the vehicle chassis and to each other, with the model number TR818 clearly displayed.
Note: nose load limits and vehicle manufactures trailer / caravan weight limits must be observed.
