HOMCOM Swivel Recliner Chair

Introduction

Thank you for purchasing this HOMCOM product. To ensure your chair serves you well, please read all instructions in this user manual carefully. If you have any questions, please contact our customer care center. Contact details are provided below.

Safety and Usage Guidelines

General Information

• This product is intended for domestic use only.
• Maximum weight capacity: 120kg [weight limit].

Instructions for Use

• Place the chair stably on a flat floor.
• Ensure the chair is assembled correctly and in good condition.
• Keep the chair away from open flames.
• Avoid overloading the chair or its fixings.

Precautions Before Assembly

• Prepare a clean and dry assembly area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance

• Clean the chair with a soft, damp fabric.
• Regularly remove any leaves or water collected on the fabric.
• Periodically check the seating and structure for looseness or damage.

Storage Conditions

• Store the fabric completely dry in a clean and dry place to prevent mold risks.

Assembly Warnings

• Beware of crushing and cutting hazards during assembly.
• The manufacturer declines all responsibility for damages caused by improper installation or weathering.
• If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.

Parts and Hardware

Parts

• (1) Seat and Backrest Assembly
• (2) Armrests (Left and Right)
• (3) Base Unit

Hardware

• (4) Bolts (x2)
• (5) Pins/Screws (x2)
• (6) Bolts (x4)
• (7) Screws/Caps (x2)
• (8) Allen Key (x1)
• (9) Allen Key (x1)

Assembly Instructions

Note: Do not fully tighten bolts until all parts are connected.

Step 1

Attach the armrests (2) to the seat and backrest assembly (1) using screws (7) and bolts (4). Use the Allen key (9) for tightening.

Step 2

Attach the base unit (3) to the seat and backrest assembly using the pins/screws (5).

Step 3

Secure the base unit (3) to the chair frame using bolts (6). Use the Allen key (8) for tightening.

Step 4

Ensure all bolts (6) are securely tightened using the Allen key (8).

Footrest Operation

Opening the Footrest

To open the footrest, operate the designated lever or mechanism. The footrest will extend forward.

Retracting the Footrest

To retract the footrest, operate the designated lever or mechanism. Caution: Do not apply force downwards when retracting.

Customer Support and Importer Information