HOMCOM 2-Seater Sofa Bed Assembly and User Manual
Model Numbers: 833-041, 833-041V90, 833-042, 833-042V00, 833-042V70
Important Information
IMPORTANT: Retain for future reference. Read carefully.
This product is intended for domestic use only.
Instructions for Use
- Place the sofa stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the sofa.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly check the seating structure.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Assembly Hazards: Be aware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation or environmental factors.
Electrical Parts:
- This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- Warning: The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped. [Symbol: Warning about damaged power cord]
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if the pins of the plug part are damaged.
Assembly Instructions
Parts List:
- Part A: Armrest Frame (x2)
- Part B: Cushion (x2)
- Part C: Allen Key (x1)
- Part D: Support Bar (x2)
- Part E: Side Frame (x2)
- Part F: Seat Cushion Cover (x2)
- Part G: Sofa Base (x1)
Step 01: Attach Sofa Base
Attach the sofa base (G). Use the Allen key (C) and 12 screws.
[Diagram: Shows sofa base (G), Allen key (C), and 12 screws.]
Step 02: Attach Side Frames and Support Bars
Attach side frames (E) and support bars (D) to the base. Use the Allen key (C) and 8 screws.
[Diagram: Shows side frames (E), support bars (D), Allen key (C), and 8 screws.]
Step 03: Assemble Armrests
Attach armrest frames (A) to the main structure. Fit seat cushion covers (F) onto the armrest frames.
[Diagram: Shows armrest frames (A) and cushion covers (F) being fitted.]
Step 04: Prepare Second Armrest Assembly
Prepare the second armrest assembly.
[Diagram: Shows two identical armrest assemblies.]
Step 05: Attach Armrests to Sofa
Attach the assembled armrests (A) to the main sofa structure using the Allen key (C) and 4 screws.
[Diagram: Shows armrests (A) being attached to the sofa structure with Allen key (C) and screws.]
Step 06: Place Cushions
Place cushions (B) onto the sofa.
[Diagram: Shows cushions (B) being placed on the sofa.]
Step 07: Secure Back Cover
Zip up the back cover of the sofa.
[Diagram: Shows the zipper operation to close the back cover.]
Step 08: Convert to Bed
Convert the sofa to a bed by folding down the backrest and extending the base.
[Diagram: Shows the sofa folding mechanism, transforming it into a flat bed.]
Step 09: Sofa Bed Complete
The sofa is now converted into a bed.
[Diagram: Shows the final sofa bed configuration.]
Customer Support
If you have any questions, please contact the customer care center. Contact details vary by region:
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 416-792-6088, customerservice@aosom.ca
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- FR: 0033-1-84166106, aosom@mhfrance.fr
- DE: 0049-0(40)-87408465, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
- ES/PT: 0034-931294512, atencioncliente@aosom.es / info@aosom.pt
Recycling information: Dispose of the product responsibly. ♻️
