HOMCOM 833-860 Accent Rocking Chair

Important Information

IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

This product is intended for domestic use only.

Instructions for Use:

• Place the chair stably on a flat floor.
• Stay away from open flames.
• Avoid overloading the chair.

Precautions Before Assembly:

• Prepare a clean and dry mounting area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance:

• Clean with a soft fabric.
• Check the seating regularly.

Storage Conditions:

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to a bad installation or weather influences.

Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.

If the product has electrical parts: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The appliance is only to be used with the power supply unit provided with the appliance. The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped. If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance. The power supply unit shall not be used if pins of the plug part are damaged.

Parts List

• Part A: Seat Cushion (x1)
• Part B: Chair Base/Frame (x1)
• Part C: Left Armrest (x1)
• Part D: Right Armrest (x1)
• Part E: Front Crossbar (x1)
• Hardware F: Screws (x2 + 1 spare)
• Hardware G: Screws (x4 + 1 spare)
• Hardware H: Washers (x6 + 1 spare)
• Hardware I: Washers (x6 + 1 spare)
• Hardware J: Allen Key (x1)

Assembly Instructions

Step 01: Attach Front Crossbar to Right Armrest

Connect part E to part D using one screw (F), one washer (H), one washer (I), and the Allen key (J). Ensure the connection is secure (✔️).

Step 02: Attach Left Armrest to Right Armrest Assembly

Connect part C to the assembly of part D and E using one screw (F), one washer (H), one washer (I), and the Allen key (J). Ensure the connection is secure (✔️).

Step 03: Attach Armrest Assemblies to Chair Base

Attach the assembled left armrest unit (C+D+E) and the right armrest unit (D+E) to the chair base (B). Use four screws (G), four washers (H), four washers (I), and the Allen key (J) for each connection point. Ensure all connections are secure (✔️).

Step 04: Install Seat Cushion

Place part A (Seat Cushion) into the assembled chair frame.

Contact Information

For questions, contact customer care centers for Aosom or MH Star UK Ltd. Contact details are available for US, CA, DE, IT, ES, UK, FR, PL, and RO regions.