HOMCOM Recliner Chair
Model Numbers: 833-918, 833-918V70, 833-918V80
Key Features: 5 Steps (assembly/operation), 0.5 Hours (estimated time), 100kg Weight Limit
Important Information
Important: Retain for future reference. Read carefully. For domestic use only.
Assembly Precautions: Beware of crushing and cutting hazards during assembly. Prepare a clean and dry mounting area. Verify the product is not damaged and all parts are present.
Manufacturer Disclaimer: The manufacturer declines all responsibility in case of damages due to bad installation or weather. If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Instructions for Use
- Place the chair stably on a flat floor.
- Stay away from open flames or heat sources.
- Avoid overloading the chair.
Maintenance
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Parts List
| Part | Description | Quantity |
|---|---|---|
| E | Base/Wheel Assembly | 1 |
| F | Armrest | 2 |
| G | Gas Lift Cylinder | 1 |
| H | Chair Seat/Back Assembly | 1 |
| K | Chair Base/Mechanism | 1 |
| M | Armrest Support | 1 |
| N | Armrest Support | 1 |
Hardware List
| Part | Description | Quantity |
|---|---|---|
| A | Bolt M6*16 | 4 |
| B | Bolt M6*20 | 4 |
| C | Bolt M8*55 | 2 |
| D | Washer/Bushing | 2 |
| I | Allen Key M4 | 1 |
| J | Allen Key M6 | 1 |
Assembly Steps
Step 1: Base Assembly
Insert the Gas Lift Cylinder (G) into the center of the Base/Wheel Assembly (E).
Step 2: Attach Mechanism
Attach the Chair Base/Mechanism (K) to the assembled base (E+G).
Step 3: Mount Seat
Attach the Chair Seat/Back Assembly (H) to the Chair Base/Mechanism (K) using Bolts (C) and Allen Key (J). Secure with Washers/Bushings (D) as shown.
Step 4: Attach Armrests
Attach the Armrests (F) and Armrest Supports (M, N) to the Chair Seat/Back Assembly (H) using Bolts (A, B) and Allen Keys (I, J).
Step 5: Reclining Function
The chair features a reclining mechanism. Refer to the diagrams for the motion. [Diagram shows chair tilting back and forth].
Assembly Complete
Your HOMCOM recliner chair is now assembled and ready for use.
[Recycle symbol] Information on disposal of electrical and electronic equipment is available. Please refer to local recycling guidelines.
