HOMCOM Recliner Chair User Manual and Assembly Guide
Model Numbers: 833-522, 833-522V01, 833-522V03, IN230800057V03_GL
Introduction
This document provides essential information for the safe and proper use, assembly, and maintenance of your HOMCOM recliner chair.
Important: Please read this manual carefully and retain it for future reference. This product is intended for domestic use only.
Usage Instructions
- Place the chair stably on a flat floor.
- Keep the chair away from open flames and heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that all parts are present before beginning assembly.
Maintenance
- Clean the chair with a soft fabric.
- Regularly check the seating and structural integrity.
Storage Conditions
Store the fabric in a completely dry, clean, and dry place to prevent mold formation.
Safety Warnings
Assembly Hazards: Be aware of potential crushing and cutting hazards during the assembly process.
Manufacturer Liability: The manufacturer declines all responsibility for damages resulting from improper installation or environmental factors.
Height Adjustment: Warning! Replacement or repair of components for the chair's height adjustment system must only be performed by qualified personnel.
Electrical Safety Information
This appliance may be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have received supervision or instruction concerning the safe use of the appliance and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be performed by children without supervision.
- The appliance must only be used with the power supply unit provided.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer must be scrapped.
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- Do not use the power supply unit if the pins of the plug part are damaged.
Assembly Guide
The assembly process involves two main components, labeled as Part 1 and Part 2. The process is estimated to take approximately 5 minutes and involves 2 steps.
Step 1: Connect Part 1 to Part 2. This typically involves aligning specific connection points and securing them, as illustrated in the provided diagrams.
Step 2: Finalize assembly and test functionality. The diagrams show the chair in its assembled state, including the operation of the reclining mechanism.
Contact and Support Information
For any questions or assistance, please contact the relevant customer care center:
- USA: Aosom LLC, Phone: 001-877-644-9366, Email: customerservice@aosom.com
- Canada: Aosom Canada Inc., Phone: 416-792-6088, Email: customerservice@aosom.ca
- United Kingdom: MH STAR UK LTD, Phone: 0044-800-240-4004, Email: enquiries@mhstar.co.uk
- France: MH FRANCE, Phone: 0033-1-84166106, Email: aosom@mhfrance.fr
- Germany: MH Handel GmbH, Phone: +49 4087408465, Email: service@aosom.de
- Italy: AOSOM Italy srl, Phone: 0039-0249471447, Email: clienti@aosom.it
- Spain & Portugal: SPANISH AOSOM, S.L., Phone: 0034-931294512, Email: atencioncliente@aosom.es / info@aosom.pt
Please consider recycling or properly disposing of packaging materials. [Recycle Symbol]
