FCX10 Land Rover Defender Steel Wire Installation Diagram

Diagram A: Initial Attachment Points

This diagram illustrates the initial attachment points for the steel wire installation on the FCX10 Land Rover Defender model.

[A] indicates the starting point of the illustration.

Visible attachment points are shown on:

• The front bumper area, near the headlights and grille.
• The roof rack assembly, specifically near the front auxiliary lights.
• The side of the vehicle, near the rear door pillar.

Small, coiled wire elements are depicted at these points, suggesting where the steel wire will be connected or anchored.

Diagram B: Steel Wire Connection

This diagram demonstrates the steel wire connection process.

[B] indicates the starting point of this illustration.

A steel wire is shown extending from the front of the vehicle, possibly from a winch or bumper attachment point, and is routed towards the roof rack.

The wire appears to connect to an anchor point on the front of the roof rack assembly, near the auxiliary lights. A connector or loop mechanism is visible at the end of the wire.

The diagram highlights the path and connection of the steel wire for securing or modifying the vehicle's appearance or function.