FCX10 Land Rover Defender 110 Camel Trophy Edition
Installation Reference for Window Screen Opening Positioning
This document provides a precise positioning reference for installing a window screen or protective net on the FCX10 Land Rover Defender 110 Camel Trophy Edition model. All measurements are provided in millimeters (mm).
Land Rover and the Land Rover Logo are trademarks owned and licensed by Jaguar Land Rover Limited.
Left Side Installation Points
The following details the installation points on the left side of the vehicle, as indicated in the diagrams. Units are in millimeters (mm).
Point A
Overall length: 80.1 mm. Offsets from edges: 3.8 mm (x2), 9.8 mm (x2).
Point B
Overall length: 69.9 mm. Offsets from edges: 9 mm (x1), 4.9 mm (x2). Lower offsets: 10.9 mm (x2).
Point C
Dimensions: Height 52.5 mm, Width 2.3 mm. Offsets from edges: 2.1 mm (x2).
Point D
Dimensions: Height 52.5 mm, Width 2.3 mm. Offsets from edges: 2.1 mm (x2).
Right Side Installation Points
The following details the installation points on the right side of the vehicle, as indicated in the diagrams. Units are in millimeters (mm).
Point E
Dimensions: Height 52.5 mm, Width 2.3 mm. Offsets from edges: 2.1 mm (x2).
Point F
Dimensions: Height 52.5 mm, Width 2.3 mm. Offsets from edges: 2.1 mm (x2).
Point G
Overall length: 69.9 mm. Offsets from edges: 9 mm (x1), 4.9 mm (x2). Lower offsets: 10.9 mm (x2).
Point H
Overall length: 80.1 mm. Offsets from edges: 3.8 mm (x2), 9.8 mm (x2).
