Controller Layout
Front View:
- Top Buttons: [View button], [Menu button], [LB], [RB], [LSB/LTS], [RSB/RTS], [D-pad], [A button], [B button], [X button], [Xbox button]
- Indicators: [Profile LED], [Status LED], [Power LED]
- Buttons: [Profile button], [Pair button], [RT], [LT]
Bottom View:
- Grips: [P1 button], [P2 button]
- Port: [USB-C]
Power On/Off
- To turn on: Press the [Xbox button].
- To turn off: Hold the [Xbox button] for 6 seconds.
- To force shut down: Hold the [Xbox button] for 12 seconds.
Connectivity
Android ?
System Requirement: Android 13.0 or above.
Bluetooth Connection:
- Press the [Xbox button] to turn on the controller.
- Press and hold the [Pair button] for 3 seconds to enter pairing mode. The [Status LED] will blink rapidly (required for the first-time connection only).
- On your Android device, go to Bluetooth settings, search for "8BitDo Ultimate MGX", and connect. The [Status LED] will remain solid when the connection is successful.
iOS ?
System Requirement: iOS 18.5 or above.
Bluetooth Connection:
- Press the [Xbox button] to turn on the controller.
- Press and hold the [Pair button] for 3 seconds to enter pairing mode. The [Status LED] will blink rapidly (required for the first-time connection only).
- On your iOS device, go to Bluetooth settings, search for "8BitDo Ultimate MGX", and connect. The [Status LED] will remain solid when the connection is successful.
Windows ?
System Requirement: Windows 10 (1903) or above.
Wired Connection:
Connect the controller to your Windows device via the USB cable and wait until the controller is successfully recognized by the device.
Features
Fast Button Swap
When a swapped function button is pressed, the [Profile LED] blinks continuously.
Button swap settings are not permanent and will revert to default settings after the controller is powered off or disconnected.
The [Xbox button], [P1 button], and [P2 button] are not supported for button swapping.
Example swap illustration: [A button] + [B button] + [View button] results in a sequence of [A button] then [B button].
P1/P2 Buttons Configuration
A single button on the controller can be mapped to the [P1 button] or [P2 button].
Mapping for [LSB/LTS] and [RSB/RTS] is not supported.
Button configuration settings are not permanent and will revert to default settings after the controller is powered off or disconnected.
The [Profile LED] blinks continuously when the mapped button is pressed.
- To map a button (e.g., [A button]) to [P1 button]: Press and hold [P1 button], then press [A button] and [View button]. The [P1 button] will then function as the [A button].
- To unmap a button from [P1 button]: Press and hold [P1 button], then press the [Profile button] (represented by a star icon in diagrams). The [P1 button] will be set to [empty].
Battery Information ?
Battery Type: Built-in 300mAh rechargeable battery.
Usage Time: Up to 13 hours.
Charging Time: Approximately 1 hour.
Auto-Shutdown: The controller will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection. Auto-shutdown is disabled during wired connection.
Power LED Status:
- Low battery: [Power LED] Red blinks.
- Charging: [Power LED] Green blinks.
- Fully charged: [Power LED] Green remains solid.
Safety Warnings ⚠️
- Always use batteries, chargers, and accessories provided by the manufacturer.
- The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
- Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
- Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
- Any unauthorized changes or modifications to the device will void the manufacturer's warranty.
- This product contains small parts that may cause choking. Not suitable for children under three years old.
- This product features flashing lights. Individuals with epilepsy or photosensitivity should disable the lighting effects before use.
- Cables may cause tripping or entanglement hazards. Keep them away from walkways, children, and pets.
- Stop using this product immediately and seek medical attention if you experience dizziness, visual disturbances, or muscle spasms.
Ultimate Software
Please visit app.8bitdo.cn to download the Ultimate Software for the latest firmware.
Support
Please visit support.8bitdo.com for further information & additional support.
