Allen + Roth Wall Lantern

Safety Information

WARNING: Installing a fixture into an electrical system without proper grounding can lead to electrical shock and serious injury or death if wires become broken or loose. Suspending the fixture by supply wires and connectors can cause it to fall, resulting in personal injury or fire.

CAUTION: Do not use bulbs with a wattage higher than specified on the fixture. Ensure all electrical connections comply with local codes, ordinances, and the National Electrical Code. Hire a qualified electrician if you are unfamiliar with electrical wiring. Turn off electricity at the main fuse or circuit breaker box before beginning installation.

CAUTION: All fixtures must be mounted to an outlet box supported by the building structure. Do not support the fixture by drywall alone. Do not connect the fixture's ground wire to the hot or neutral supply wire. Do not connect this fixture to an electrical system that does not provide equipment grounding.

Warranty

Allen + Roth warrants this lighting fixture against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found to be defective within this period, present a copy of the bill of sale and the product in its original carton to the place of purchase. Allen + Roth will, at its option, repair, replace, or refund the purchase price. The consumer is responsible for all installation and removal costs. This warranty does not cover damage due to misuse, accidental damage, or improper handling/installation. It specifically excludes liability for direct, incidental, or consequential damages. Some states do not allow exclusions or limitations on implied warranties, so the above may not apply.

Quick Reference Guide

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not attempt assembly if parts are missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included):

• Screwdriver
• Wire strippers
• Wire connectors
• Pliers
• Adjustable wrench
• Ladder
• Safety glasses

Helpful Tools (Not Included):

• Voltage tester

Package Contents

• (A) Mounting Bracket
• (B) Fixture
• (C) Wire Connectors

Hardware Contents

• (AA) x 3
• (RR) x 2

Installation Overview

1. Turn OFF the electrical power at the main fuse or circuit breaker.
2. Mount the bracket (A) to the outlet box using screws (AA).
3. Connect the wires: Black fixture wire to black (hot) supply wire, white fixture wire to white (neutral) supply wire, and bare ground wire to supply ground wire. Use wire connectors (C). If supply wire colors differ, consult a professional electrician.
4. Loosen the ground screw on the mounting bracket (A) and wrap the bare wire from the fixture (D) around it. Tighten the screw.
5. Connect the black fixture wire to the black supply wire and the white fixture wire to the white supply wire using wire connectors. Connect the ground wire.
6. Secure the fixture (B) to the mounting bracket (A) using screws (RR).
7. If the fixture is not secure, adjust the hex nut on the threaded rod of the mounting bracket.
8. Install bulbs (sold separately). Use 60W max. E12-base incandescent bulbs or CFL equivalent.
9. Apply silicone sealant (not included) around the fixture base where it meets the wall for weatherproofing.
10. Restore power at the main fuse or circuit breaker.