Allen + Roth 2 CT Wall Lantern

Care and Maintenance

Shut off the main power supply before performing any maintenance. Periodically clean the fixture with a mild, non-abrasive glass cleaner and a soft cloth. Avoid using solvents or cleaners with abrasive agents. Do not spray liquid cleaner directly onto the bulb or wiring.

Questions, problems, or missing parts? Contact Allen + Roth customer service at 866-439-9800 (8 a.m. - 8 p.m., EST, Monday - Sunday) or ascs@lowes.com.

Thank you for purchasing this Allen + Roth product. For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab.

Feeling confident? Start your next project! Visit www.lowes.com for more information.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

WARNING

• Installing a fixture into an electrical system without proper grounding can lead to electrical shock if wires become broken, cut, or loose. This can cause serious injury or death.
• Wire connectors will not support the weight of this fixture. Suspending the fixture by supply wires and connectors can cause it to fall, resulting in personal injury or fire hazards.

CAUTION

• Do not use bulbs with a wattage greater than the maximum specified on the fixture to avoid overheating and fire risk.
• Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with electrical wiring installation.
• Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
• All fixtures must be mounted to an outlet box supported by the building structure. Do not support the fixture by drywall alone, as it may fall and cause injury.
• Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

Allen + Roth warrants its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found defective within this period, return it with a copy of the bill of sale to the place of purchase. Allen + Roth will, at its option, repair, replace, or refund the purchase price. Installation and removal costs are the consumer's responsibility. This warranty does not cover defects due to misuse, accidental damage, or improper handling/installation. It excludes liability for direct, incidental, or consequential damages. Some states may not allow these limitations, so the above may not apply to you. This warranty grants specific rights, and you may have other rights that vary by state.

Quick Reference Guide / Guía de Referencia Rápida

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not assemble if parts are missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included)

[Screwdriver icon]

Helpful Tools (Not Included)

[Ladder icon]

Package Contents

• 2 x Part A
• 4 x Part B
• 4 x Part C
• 4 x Part D

Hardware Contents

• 6 x AA
• 4 x RR
• 2 x E

Installation Overview

1. Turn OFF electrical power at the main fuse or circuit breaker. [Power off symbol]
2. Attach the mounting bracket (A) to the outlet box using two mounting bracket screws (RR). Ensure the screws are parallel to the horizon.
3. Connect the fixture wires: Connect the black fixture wire to the black (hot) supply wire. Connect the white fixture wire to the white (neutral) supply wire. Connect the fixture's bare ground wire to the supply ground wire. If supply wire colors differ, consult a professional electrician.
4. Loosen the ground screw on the mounting bracket (A). Wrap the bare wire from the fixture (E) around the ground screw and tighten it.
5. Restore power at the main fuse or circuit breaker. [Power on symbol]
6. Install bulbs (sold separately). Use 60W max. medium-base incandescent bulbs or CFL equivalent. [Light bulb icon]

Silicone sealant not included.