Allen + Roth Flushmount Ceiling Fixture

Care and Maintenance

Shut off the main power supply before performing any maintenance. Periodically clean the fixture using a mild, non-abrasive glass cleaner and a soft cloth. Do not use solvents or cleaners containing abrasive agents, and do not spray liquid cleaner directly onto the bulb or wiring.

Customer Support

For questions, problems, or missing parts, contact Allen + Roth customer service at 866-439-9800 (8 a.m. - 8 p.m., EST, Monday - Sunday) or ascs@lowes.com.

For more information, visit www.lowes.com and refer to the Guides & Documents tab on the product page.

Safety Information

General Safety

Read and understand this entire manual before attempting to assemble, operate, or install the product.

WARNING

• Installing a fixture into an electrical system without proper grounding can lead to electrical shock if wires become broken or loose.
• Wire connectors will not support the weight of this fixture. Suspending the fixture by supply wires and connectors can cause it to fall, resulting in injury or fire hazard.

CAUTION

• Do not use bulbs with a wattage greater than the maximum specified on the fixture to avoid overheating and fire risk.
• Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code (ANSI/NFPA 70-199). Hire a qualified electrician if you are unfamiliar with electrical wiring.
• Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
• All fixtures must be mounted to an outlet box supported by the building structure; do not rely on drywall alone.
• Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wires.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

The manufacturer warrants this lighting fixture against defects in materials and workmanship for three (3) years from the date of purchase. Proof of purchase is required. The manufacturer will repair, replace, or refund the purchase price at its option. Installation and removal costs are the consumer's responsibility. This warranty does not cover damage from misuse, accidental damage, or improper handling/installation. It excludes liability for direct, incidental, or consequential damages. Some states may not allow these limitations.

Installation Overview

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not assemble if parts are missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included)

• Screwdriver
• Wire strippers
• Wire connectors

Helpful Tools (Not Included)

• Ladder
• Safety glasses

Package Contents

• A: Fixture (preassembled)
• B: Mounting Bracket (preassembled)
• C: Fixture Body (preassembled)
• D: Thumb Screw
• E: Decorative Nut

Hardware Contents

• AA: Wire Connectors (x3)
• RR: Screws (x2)

Installation Steps

1. Turn OFF electrical power at the main fuse or circuit breaker.
2. Mount the bracket (B) to the outlet box using the provided screws (RR).
3. Attach the fixture (A) to the mounting bracket (B).
4. Connect the wires:
   • Connect the black wire from the fixture to the black supply wire.
   • Connect the white wire from the fixture to the white supply wire.
   • Connect the ground wire (green or bare) from the fixture to the supply ground wire.
5. Secure the fixture by tightening the thumb screws (D) through the decorative nuts (E) into the fixture (A). Ensure the screw holes in part (E) align with the grooves in part (A) before inserting the thumb screw (D) to prevent the fixture from falling.
6. Install bulbs (sold separately). Use 40W max. medium-base incandescent bulbs or CFL equivalent.
7. Restore power at the main fuse or circuit breaker.