ALLEN + ROTH Wall Lantern

Care and Maintenance

Shut off the main power supply before performing any maintenance. Periodically clean the fixture using a mild, non-abrasive glass cleaner and a soft cloth. Do NOT use solvents or cleaners containing abrasive agents. Do not spray liquid cleaner directly onto the bulb or wiring.

Contact and Support

Questions, Problems, or Missing Parts? Before returning, contact us at: 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday or ascs@lowes.com.

For more information, visit Lowes.com. Search the item number and refer to the Guides & Documents tab on the product's page.

Safety Information

WARNING

Installing a fixture into an electrical system without proper grounding can allow metal parts to carry electrical current if wires, connections, or splices break or become loose. Contact with the fixture could result in electrical shock, serious injury, or death.

Wire connectors will not support the weight of this fixture. Suspending the fixture by supply wires and connectors will cause it to fall, potentially leading to personal injury, electrical shock, or fire.

CAUTION

Do not use bulbs with a wattage exceeding the maximum value stated on the fixture. Higher wattage lamps increase temperatures and may pose a fire risk.

Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with electrical wiring installation.

Turn off electricity at the main fuse box or circuit breaker box before beginning installation.

All fixtures must be mounted to an outlet box supported by the building structure. Do not support the fixture by drywall alone, as it may fall and cause personal injury.

Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire from the outlet box.

Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

The manufacturer warrants all lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found defective within this period, present a copy of the bill of sale and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price. All installation and removal costs are the consumer's responsibility. This warranty does not cover defects due to misuse, accidental damage, improper handling, or installation. It specifically excludes liability for direct, incidental, or consequential damages. Some states may not allow exclusions or limitations on implied warranties, so these may not apply to you. This warranty grants specific rights, and you may have other rights that vary by state.

Installation Guide

Preparation

Before starting assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list. Do not attempt to assemble if any part is missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included)

• Screwdriver
• Wire strippers
• Wire connectors
• Pliers
• Ladder
• Safety glasses

Helpful Tools (Not Included)

• Voltage tester

Package Contents

• Fixture (A)
• Mounting Bracket (B)
• Wire Nuts (C)
• Mounting Screws (D)
• Wire Connectors (E)
• Ground Screw (F)

Hardware Contents

• Screws (AA) x3
• Screws (RR) x2

Installation Steps

Step 1: Turn Off Power

Turn OFF the electrical power at the main fuse or circuit breaker.

Step 2: Mount the Bracket

Secure the mounting bracket (B) to the outlet box using the appropriate screws (D). Ensure the bracket is level.

Step 3: Prepare Ground Wire

Loosen the ground screw on the mounting bracket (B). Wrap the bare wire from the fixture (A) around the ground screw and tighten it securely.

Step 4: Connect Wires

Connect the black wire from the fixture (A) to the black (hot) supply wire. Connect the white wire from the fixture (A) to the white (neutral) supply wire. Connect the bare/green ground wire from the fixture (A) to the bare/green ground wire from the supply. If supply wire colors differ, consult a professional electrician.

Step 5: Attach Fixture

Carefully attach the fixture (A) to the mounting bracket (B). The position of screws (RR) on the bracket will determine the fixture's orientation. Use the center screw to ensure mounting screws (D) are aligned perpendicular to the horizon.

Step 6: Install Bulb

Install a bulb (sold separately). Use 60W maximum medium-base incandescent bulbs or CFL equivalent.

Step 7: Photo Sensor Functionality

The fixture includes a photo sensor that automatically turns the light on at dusk and off at dawn.

Step 8: Restore Power

Restore the power at the main fuse or circuit breaker.

Finishing Touches

Silicone sealant (not included) may be used around the fixture base for weatherproofing.