LG Wi-Fi Sound Bar

Front Panel

• [Standby] ?: Switches the unit ON or OFF.
• [Function] ⚙️: Selects function.
• [Volume] ?: Adjusts volume.
• [Wi-Fi] ?: Selects Wi-Fi function.

Reset the Unit

Press and hold the [power button] on the unit until you hear the beep sound once. ?

Rear Panel

• DC IN ⚡: Connect to the AC adapter.
• HDMI IN ?: Connect to a device with HDMI OUT.
• HDMI OUT (TV eARC/ARC) ?: Connect to a TV.
• OPTICAL IN ?: Connect to an optical device.
• USB port ?: Connect to a USB device.

⚠️ Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

1. Press Pairing ? on the rear of the wireless subwoofer. The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing ?.)
2. Turn on the sound bar. Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.

⚠️ Keep the sound bar and the subwoofer away from devices that may cause wireless interference (e.g., wireless router, microwave oven) by more than 1 meter (↔️ 1 m).

TV Connection

Connect the sound bar and TV using Optical (?) or HDMI ARC (?).

Optical Connection

1. Connect the sound bar to the TV using an Optical cable.
2. Set up [External Speaker (Optical)] on your TV setting menu.

HDMI (TV eARC/ARC) Connection

1. Connect the sound bar to the TV using an HDMI cable.
2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.

Note: HDMI connection is unavailable if your TV does not support HDMI ARC. If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.

Additional Device Connection

Connect external devices such as a Set-top Box or Player as follows:

Diagram Description: Shows connections from external devices (Set-top Box, Player) via HDMI OUT or OPTICAL OUT to the sound bar's HDMI IN or OPTICAL IN. The sound bar's HDMI OUT (TV eARC/ARC) connects to the TV.

After connecting, set the input source by pressing the [Function] button (F) repeatedly. ?️

Network Connection

Diagram Description: Illustrates a typical home network setup: a router, a smart device (phone/tablet), and the sound bar. It shows the router connected to the internet, the smart device connected to the router's Wi-Fi, and the sound bar also connected to the router (via power).

1. Check network condition. Ensure a router connected to your network is installed.
2. Connect your smart device to your home network.
3. Connect the sound bar to the power supply.

Note: All devices should be connected to the same router.

Step 1: Install "Google Home" App

Download the Google Home App from the Google Play Store ▶️ or App Store ?.

Step 2: Set up the Wi-Fi connection with the app

1. Connect your smart device to the Wi-Fi network that you will use for your unit.
2. Note: For iOS devices, ensure Bluetooth is turned on.
3. Launch the "Google Home" app ?.
4. Follow the on-screen steps for Wi-Fi connection within the app.

Confirmation: When the unit is properly connected to Wi-Fi, "CONNECTED" will appear on the display window, accompanied by a sound.

Important Notes:

• When connecting to Wi-Fi, the app may request you to create a Google Account. A Google account is required to use this app.
• The "Google Home" app is provided by Google and may be subject to changes based on Google's policies.

Remote Control

Diagram Description: An illustration of the remote control, showing buttons for Power, Volume Up/Down, Function, Sound Effect, Folder navigation, Information display, and Repeat playback.

Button Functions:

• SOUND EFFECT: Selects a sound effect mode. (For TV remote control, long press SOUND EFFECT and press it again.)
• FOLDER / V: Searches a folder.
• J: Displays information of a file, an input source, a connected Bluetooth device name, or an application name. Long press J and press it again to activate Auto Power ON/OFF.
• [Volume Up/Down]: Adjusts the sound level of each speaker.
• Surround sound: Long press [Volume Up/Down] and press it again.
• REPEAT: Listens to your files repeatedly or randomly.

Replacement of Battery

Diagram Description: Shows the battery compartment of the remote control. It requires two AAA (R03) batteries.

Additional

Download LG Sound Bar Application

You can manage speaker settings and control the speaker using the "LG Sound Bar" application. Download it from the App Store or Google Play Store.

AI Room Calibration

AI Room Calibration is a sound tuning tool that adjusts the audio settings of the Sound Bar based on the room acoustics and environment. To use this feature, install the "LG Sound Bar" app. Navigate to the [Sound Setting] menu and choose [AI Room Calibration].

Additional Information

Specification

Note: Design and specifications are subject to change without notice.

Rear Speakers Ready

Ready for surround sound with the Rear Speakers Kit, sold separately (SPK8-S).

Dolby Atmos® and DTS:X® Content

To enjoy content containing Dolby Atmos® and DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.

How to disconnect the wireless network connection or the wireless device

Turn off the unit by pressing the power button ? for more than 3 seconds.

HDMI Logo: The HDMI logo is present, indicating support for High-Definition Multimedia Interface.