LG Wireless Sound Bar

Front Panel

The buttons are located on the side:

• ⏚ (Standby): Switches the unit ON or OFF.
• F (Function): Selects function.
• ? (Volume): Adjusts volume.

Rear Panel

Ports available:

• DC IN: Connect to the AC adapter.
• OPTICAL IN: Connect to an optical device.
• HDMI IN: Connect to a device with HDMI OUT.
• HDMI OUT (TV ARC): Connect to a TV.
• USB Port: Connect to a USB device.

⚠️ Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow these steps:

1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and wireless subwoofer will connect automatically. The subwoofer's green LED will turn on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to connect manually:

1. Press PAIRING on the rear of the wireless subwoofer. The green LED on the rear will blink quickly. (If the green LED does not blink, press and hold the PAIRING button.)
2. Turn on the sound bar. Pairing is completed, and the green LED on the rear of the wireless subwoofer will turn on.

ℹ️ Keep the sound bar and subwoofer more than 1 meter (3.3 ft) away from devices like wireless routers or microwave ovens to prevent wireless interference.

TV Connection

Connect the sound bar and TV using an Optical cable or HDMI ARC.

Optical Connection

1. Connect the sound bar to the TV using an Optical cable.
2. Set up [External Speaker (Optical)] in your TV's setting menu.

HDMI (ARC) Connection

1. Connect the sound bar to the TV using an HDMI cable.
2. Set up [External Speaker (HDMI ARC)] in your TV's setting menu.

❗ HDMI connection is unavailable if your TV does not support HDMI ARC.
❗ If this unit is connected by OPTICAL and ARC simultaneously, the ARC signal has higher priority.

Additional Device Connection

Connect external devices as follows:

1. Connect an external device (e.g., Set-top Box, Player) to the sound bar using HDMI IN or OPTICAL IN.
2. Set the input source on the sound bar by pressing F repeatedly.

Remote Control

Battery Replacement:

The remote control requires AAA batteries.

Button Functions:

• ⏭️ / ⏪ (Skip/Search): Skips tracks or searches.
• ▶️ / ⏸️ (Play/Pause): Controls playback.
• Bluetooth connection lock (BT LOCK): Press F repeatedly to select Bluetooth function. Long press ▶️ / ⏸️ to limit Bluetooth connection to only BT and LG TV.
• SOUND EFFECT: Selects a sound effect mode.
• TV remote: Long press SOUND EFFECT and press it again to use TV remote control functions.
• ? (Folder): Searches a folder.
• ℹ️ (Info): Displays information about the file, input source, or connected Bluetooth device name.
• Auto Power ON/OFF: Long press ℹ️ and press it again to toggle Auto Power ON/OFF.
• ? (Volume adjustment): Adjusts sound level.
• Surround sound: Long press ? and press it again to activate/deactivate surround sound.
• REPEAT: Listens to your files repeatedly or randomly.

Specifications

Design and specifications are subject to change without notice.

Rear Speakers Ready: Ready for surround sound with Rear Speakers Kit sold separately (SPK8-S).

Open Source Software Notice

This product contains open source software. To obtain the source code under GPL, LGPL, MPL, and other licenses, please visit http://opensource.lge.com. License terms, warranty disclaimers, and copyright notices are also available for download there.

LG Electronics can provide open source code on CD-ROM for a charge covering distribution costs upon email request to opensource@lge.com. This offer is valid for three years after the last shipment of the product.

Details on specific open source components, their licenses, and copyrights are provided in the original document.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and the receiver.
• Connecting the equipment to a different circuit than the receiver.
• Consulting a dealer or experienced radio/TV technician.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized changes or modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. The transmitter must not be co-located or operated with any other antenna or transmitter.

Installation and operation require a minimum distance of 20 cm (7.8 inches) between the antenna and the user's body. Users must follow specific operating instructions for RF exposure compliance.

FCC Radio Frequency Interference Requirements:

High power radars are primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with or damage this device. This device cannot be co-located with any other transmitter.

Supplier's Declaration of Conformity:

Important Safety Instructions

⚠️ CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

⚡ The lightning flash with arrowhead symbol within an equilateral triangle alerts users to uninsulated dangerous voltage within the product's enclosure that may pose a risk of electric shock.

❗ The exclamation point within an equilateral triangle alerts users to important operating and maintenance instructions in the accompanying literature.

WARNING:

• TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• Do not install this equipment in a confined space such as a bookcase or similar unit.

CAUTION:

• Do not use high voltage products around this product (e.g., electrical swatter), as it may malfunction due to electrical shock.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings are provided for ventilation and to protect against overheating. Never block openings by placing the product on soft surfaces like beds or rugs. Do not place in built-in installations unless proper ventilation is provided or manufacturer's instructions are followed.
• The Power Plug is the disconnecting device. In case of emergency, it must remain readily accessible.
• The apparatus should not be exposed to water (dripping or splashing), and no objects filled with liquids, such as vases, should be placed on it.
• Refer to the main label on the product for safety marking information, including product identification and supply ratings.

For models using a Laser device:

This product employs a Laser System. Read this manual carefully for proper use and retain for future reference. Contact an authorized service center for maintenance. Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Do not try to open the enclosure to prevent direct exposure to the laser beam.

For models using a battery:

This device is equipped with a portable battery or accumulator. CAUTION: Risk of fire or explosion if the battery is replaced by an incorrect type.

How to Safely remove batteries or battery pack: Follow assembly steps in reverse order. Dispose of old batteries/packs in designated collection points to prevent environmental contamination and health threats. Do not dispose of with other waste. Use local, free reimbursement systems if available. Do not expose batteries/packs to excessive heat.

For models using a built-in battery:

• Do not store or transport at pressures lower than 11.6 kPa (0.116 bar) and at above 15,000 m (9.32 miles) altitude.
• Beware of battery replacement with incorrect types, disposal in fire or hot oven, mechanical crushing, or exposure to extreme temperatures or low air pressure, which can cause explosion or leakage.

For models using an adapter:

Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer, as it may cause damage and void your warranty.

IMPORTANT SAFETY INSTRUCTIONS (Numbered List):

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
8. Do not install near any heat sources (radiators, heat registers, stoves, etc.).
9. Do not defeat the safety purpose of the polarized or grounding-type plug. Consult an electrician if the plug does not fit your outlet.
10. Protect the power cord from being walked on or pinched.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. Use caution when moving cart/apparatus combinations.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel.

Symbols:

USA/Canada Only (Product with embedded rechargeable battery ONLY):

USA: For products with a rechargeable battery, recycle the entire device according to rechargeable battery recycling standards. To dispose of properly, call (800) 822-8837 or visit www.call2recycle.org.

CANADA: For products with a rechargeable battery, recycle the battery according to standards. To dispose of properly, call 1.800.822.8837 or visit www.call2recycle.ca.

LG Electronics, Inc. Limited Warranty - USA

This limited warranty is valid for the original retail purchaser and applies only when purchased and used within the continental United States, Alaska, Hawaii, and U.S. Territories.

Warranty Period:

• Parts: One (1) Year from Original Purchase Date
• Labor: One (1) Year from Original Purchase Date

Replacement products or repair parts are warranted for the remaining portion of the original warranty period. If the original purchase date cannot be verified, the warranty begins on the 1st day of the manufacture month.

How Service is Handled:

Visit www.lg.com or call 1-800-243-0000 for troubleshooting or repair/replacement instructions. LG covers inbound and outbound shipping during the warranty period.

Limitations of Liability:

To the extent permitted by law, implied warranties of merchantability or fitness for a particular purpose are limited to the duration of this limited warranty. LG is not liable for incidental, special, or consequential damages. LG's total liability shall not exceed the invoice value paid by the customer for the product.

This Limited Warranty Does Not Apply To:

• Service trips for installation, education, or unauthorized repairs.
• Damage or failure due to power failures, interruptions, or inadequate electrical service.
• Damage or failure from operating the product contrary to instructions or intended purpose.
• Damage (including cosmetic), deterioration, malfunction, or personal injury due to misuse, abuse, negligence, improper maintenance/storage, or acts of nature.
• Damage or failure from improper installation, repair, maintenance, or foreign objects.
• Damage or failure from unauthorized modification, alteration, or use with incompatible devices.
• Damage or failure from reception problems or computer software issues.
• Damage or failure from incorrect electrical current, voltage, or unapproved cleaning products.
• Damage from transportation/handling unless reported within one week of delivery.
• Damage to display, open box, discounted, or refurbished products.
• Products with altered or missing serial numbers.
• Unauthorized accessories and software.
• Increases in utility costs.
• Damage from institutional or commercial use.

The cost of repair or replacement for excluded circumstances will be borne by the customer.

For Nearest Authorized Service Center, Where to Buy, or Product Use & Maintenance Assistance:

Visit www.lg.com or call 1-800-243-0000.

LG Electronics U.S.A., Inc.
111 Sylvan Avenue
Englewood Cliffs, NJ 07632 USA

For mail inquiries: LG Customer Interactive Center, P.O Box 240007, 201 James Record Road, Huntsville, Alabama 35813

LG Customer Information Center

USA, Consumer: 1-800-243-0000

USA, Commercial: 1-888-865-3026

Register your product Online! www.lg.com

Printed in China