NVR Overview
Front of the NVR
A line drawing of the NVR device, showing two antennas extending upwards. The front panel has several small indicator lights labeled "NET" and numbered "1" through "8".
- Net Indicator: The indicator is green on all the time when the NVR is connected to the router by network cable.
- 1-8 Indicator: The indicator is green on when the device is successfully connected to the network.
Back of the NVR
A line drawing of the back of the NVR device. It shows ports labeled: DC 12V, TF, HDMI, WAN, USB, and a Reset button.
- DC 12V: For power supply DC 12V2.5A, the DC plug size is 5.5*2.1mm.
- TF: You can insert an SD Card here to record and save the record files.
- HDMI: For connecting the monitor or display with an HDMI cable.
- WAN: Ethernet port for connecting to the router.
- USB: For a USB mouse to control the NVR or a USB disk to back up video.
- Reset: You can click here to reset all configuration.
Hard Disk Installation
Please install the hard disk first. If not, the video recorder can only monitor normally, but cannot record or playback.
A cutaway view of the NVR showing a 2.5" SATA Hard Disk installed inside. An arrow points from the NVR to a separate "Disk Back Cover" illustration, showing mounting points for the disk.
- [Notice] Please choose a specialized monitoring hard drive disk in order to record for a longer time. The video recorder supports 2.5" SATA hard disk only.
- [Warning] Please make sure the power is off before installation.
Main Features
- Support local TF card storage, the maximum can support 128G, with full automatic cycle coverage.
- Support cloud storage, network storage video recording.
- 10/100Mbps adaptive Ethernet port, RJ45 interface.
- Support remote access.
- Support mobile phone monitoring (iOS, Android), by XMEye Pro App.
- Support SYNC wireless code pairing (press the Reset button to perform SYNC wireless code pairing).
- Support Reset to restore the default settings (press and hold the Reset button for more than 3 seconds, the device will restore all configuration).
Technical Specifications
| Model | XM-9008W |
| System | Main Processor: MSTAR |
| Operating System: Embedded LINUX Operating System | |
| Video | Video Input: 8CH 3/4MP / 4CH 5MP |
| Synchronous Playback: 4CH 3MP / 4CH 5MP | |
| Encode Type: H.265AI/H.265+ (compatible H.265/H.264) | |
| Audio | Voice Broadcast: Configure Sound |
| SD Recording: Support, Max 128GB | |
| Recording Mode | Video Storage: Local Hard Disk Storage, Network Storage, Cloud Storage |
| Wireless | Video Query: Checking on Phone App (XMEye Pro) |
| Frequency Band: 2.4GHz | |
| Transmission Standard: IEEE802.11b/g/n | |
| Interface | HDMI Port: 1 HDMI Interface (output resolution: Max 1080P) |
| SD Port: 1 Port | |
| Network Port: 1 RJ45 10M/100Mbps Adaptive Ethernet Port | |
| USB Port: 1 USB2.0 Port | |
| Hard Disk Port: 1 SATA 2.5inch HDD | |
| General | Temperature: 0°C-+55°C |
| Working Humidity: 10%-90% RH | |
| Parameters |
Power: DC 12V Power Consumption: <5W |
