Die Maus Wall Clock

About This Instruction Manual

These operating instructions are to be considered a component of the device. Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product. This product is intended only for private use.

General Warnings

⚠️ Choking Hazard! Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.

⚡ Risk of Electric Shock! This device contains electronic components that operate via a power source (batteries). Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock.

? Risk of Fire/Explosion! Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire, or an explosion!

ℹ️ Note! Do not immerse the unit in water. Do not subject the unit to excessive force, shock, dust, extreme temperature or high humidity, which may result in malfunction, shorter electronic life span, damaged batteries and distorted parts.

Handling: Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.

Batteries: Use only the recommended batteries (1 x 1.5V AA/LR6). Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time. The manufacturer is not liable for damage related to improperly installed batteries.

Scope of Delivery

• Wall clock (A)
• Instruction manual
• Required batteries: 1 x 1.5V battery (Size AA/LR6) - Batteries not included with purchase.

Parts Overview

The wall clock consists of the following parts:

• 1. Dial plate
• 2. Clock hands (seconds)
• 3. Clock hands (hours)
• 4. Clock hands (minutes)
• 5. Wall mount
• 6. Battery compartment
• 7. Setting wheel

Getting Started/Power Supply

1. Insert one battery (1.5V, AA/LR6) into the battery compartment (6).
2. Turn the setting wheel (7) until the desired time is set.

Mounting/Positioning

⚠️ Note! Make sure you have mounted or placed the device in a safe way. Otherwise, the device may fall down and cause heavy damages for which the manufacturer is not liable.

The wall clock can be mounted on walls using the wall mount (5).

Cleaning and Maintenance

Before cleaning, disconnect the device from the power supply (remove batteries).

Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.

Protect the device from dust and moisture. Batteries should be removed if the unit has not been used for a long time.

Disposal

Dispose of packaging materials properly according to their type (e.g., paper, cardboard). Contact your local waste-disposal service or environmental authority for information on proper disposal.

♻️ Do not dispose of electronic devices in household garbage. As per Directive 2012/19/EC, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

Batteries and rechargeable batteries must not be disposed of in household waste. They must be returned for disposal. Batteries are marked with a crossed-out trash bin symbol.

EC Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable guidelines and standards. The full text is available at the following internet address: www.bresser.de/download/9810101GCK000/CE/9810101GCK000_CE.pdf

Warranty

The regular warranty period for this product is 5 years from the date of purchase. Please keep the proof of purchase (receipt/invoice) as proof.

During the warranty period, defective devices will be accepted by your local specialist store or by contacting the service center via email at service@bresser.de.

The guarantee expires if defects are due to:

• Improper usage
• Negligent or intentional damage through own fault and/or unauthorized third parties
• Negligent or intentional damage by the buyer and/or third parties
• Repairs or alterations carried out by third parties without Bresser GmbH's order
• Changes or damage due to force majeure (storm, hail, fire, power failure, lightning, flooding, snow damage, frost and other effects caused by animals, etc.)

The warranty is void if the proof of purchase is damaged and/or illegible or incomplete.

The guarantor is BRESSER GmbH, Gutenbergstr. 2, 46414 Rhede, Germany.

After the warranty period has expired, you also have the option to send a defective device for repair. Repairs after the warranty period has expired are chargeable. A cost estimate will be provided before carrying out the repair.

For Returns: Contact service@bresser.de before returning. Package the item carefully, preferably in original packaging. Fill out the return form and include a copy of the purchase receipt with the shipment. Unpaid shipments cannot be accepted.

Service Information

For questions or claims, please contact the service center.

Primary Contact (English):

• Email: service@bresseruk.com
• Email (General): service@bresser.de

Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany

Service contact details for other regions are available in the original document.

Return Form

A comprehensive return form is provided in multiple languages within the original document. Please use this form when initiating a return process, following the instructions in the Warranty section.