Die Maus Elephant Alarm Clock with Night Light

Service and Warranty

For service and warranty information, please visit:

www.bresser.de/warranty_terms

Manual Download:

www.bresser.de/P14675

This product is made with paper supporting responsible forestry (FSC® C133054).

Power Input: DC 5V ⎓ 1000 mA. Suitable for ages 0-3 years (referring to power supply safety, not the toy's intended age).

About this Instruction Manual

Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

General Warnings

• ⚠️ [Choking Hazard] This product contains small parts that could be swallowed by children. Keep the USB cable away from children under 3 years.
• ⚡ [Electric Shock Hazard] This device contains electronic components that operate via a power source (integrated battery). Only use the device as described in the manual, otherwise you risk an electric shock. The power supply is not suitable for children under 3 years.
• ? [Fire/Explosion Hazard] Do not expose the device to high temperatures. Use only the supplied power supply. Do not short-circuit the device or throw it into a fire! Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion.
• The terminals must not be short-circuited.
• Do not disassemble the device. In case of a defect, contact your dealer.
• Keep instructions and packaging as they contain important information.
• Check the power supply for damage to the cord, plug, enclosure, or other parts regularly before use. Do not use until damage is repaired.
• The toy is not intended for children under three years.
• The toy must only be used with the recommended power supply. The power supply is not a toy.
• The toy is not to be connected to more than the recommended number of power supplies.
• This product contains rechargeable batteries; it should be charged under adult supervision.
• The power supply used with the toy should be regularly examined for damage. Do not use if damaged until repaired.
• Keep away from fire, direct sunlight, high temperatures, and/or humidity.
• Do not use the product if it overheats, leaks, emits an odor, or shows other irregularities.
• Never store this product in a confined space.
• Always leave 5mm space around the product for ventilation.
• Dispose of at the first sign of damage or weakness.
• Do not expose the product to moisture.
• The toy shall only be used with a power supply for toys.
• This toy contains non-replaceable batteries.
• This product is not waterproof; keep it away from water.
• The toy is only to be connected to equipment bearing either of the following symbols: ? or ?? (representing compatible power sources).

EC Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable guidelines and corresponding standards. The full text of the EC declaration of conformity is available at:

www.bresser.de/download/14675/CE/14675_CE.pdf

Parts Overview

The device is shaped like a friendly elephant. The front displays the time and day of the week. Various indicators and buttons are located on the body and base.

Buttons and Ports:

Operating Instructions

Charging the Device

1. Connect one end of a USB-C cable to the clock and the other end to a suitable USB charging port or adapter.

2. A red light near the USB-C port indicates that the device is charging.

3. When the device is fully charged, the light turns green.

PLEASE NOTE:

• When the battery level is low, the battery indicator on the display will start flashing, signaling that the device needs to be charged soon.
• When the battery is almost empty, the alarm clock will sound "Battery empty" and then play the title melody of "Die Sendung mit der Maus" ("Mouse TV") before turning off automatically. The device needs to be charged to function again.

Turning the Power On/Off

To switch the device on, press and hold the power button [⚡]. The display will illuminate completely for 1 second, and the title melody of "Die Sendung mit der Maus" ("Mouse TV") will play. Once powered on, the night light will activate at its lowest brightness setting. The display will show the battery indicator [?], current time, alarm indicator [?] (if active), weekday, and night light indicator [?].

To switch the device off, press and hold the power button [⚡] again.

Adjusting LCD Screen Brightness

In time display mode, short-press the LCD Brightness button [?] to adjust the screen brightness. There are five settings available: 100%, 60%, 30%, 5%, and Off.

Setting the Time and Date

Press and hold the TIME button [⏰] to enter the time setting mode. The setting sequence is: Hour > Minutes > Day > Month > Year.

1. Setting Hour: After entering time setting mode, the hour section will flash. Use the Left/Right buttons [◀️][▶️] to adjust the hour (press and hold for faster adjustment). Short-press the TIME button [⏰] to confirm and move to the next setting.
2. Setting Minutes: While the minute section flashes, use the Left/Right buttons [◀️][▶️] to adjust the minutes (press and hold for faster adjustment). Short-press the TIME button [⏰] to confirm and move to the next setting.
3. Setting Year, Day, and Month: Set the day, month, and year (four digits). Adjust each section while it is flashing using the Left/Right buttons [◀️][▶️] (press and hold for faster adjustment). Confirm each selection with a short-press of the TIME button [⏰] before moving to the next. After the year is set, the device returns to time display mode.

PLEASE NOTE:

• If no buttons are pressed for 10 seconds during setting, the settings are automatically saved, and the clock returns to time display mode.
• The clock's date is preset to January 1st, 2025.
• Once the date is set, the day of the week will appear automatically.

Setting the Alarm

Press and hold the ALARM button [?] to enter the alarm setting mode. The setting sequence is: Hour > Minutes > Alarm Repeat Mode > Alarm Sound > Volume.

1. Setting Hour: After entering alarm setting mode, the hour section will flash. Use the Left/Right buttons [◀️][▶️] to adjust the hour (press and hold for faster adjustment). Short-press the ALARM button [?] to confirm and move to the next setting.
2. Setting Minutes: While the minute section flashes, use the Left/Right buttons [◀️][▶️] to adjust the minutes (press and hold for faster adjustment). Short-press the ALARM button [?] to confirm and move to the next setting.
3. Alarm Repeat Mode: Select the desired repeat option:
   • "1-7" – Every day (Monday to Sunday)
   • "1-5" – Weekdays (Monday to Friday)
   • "6-7" – Weekends (Saturday to Sunday)
   Notes:
   1. Press Left/Right keys briefly to adjust (hold for rapid adjustment). Press the ALARM key briefly to confirm and proceed.
   2. If no operation is performed within 10 seconds, settings are saved automatically, and the system returns to time display mode.
   3. After alarm setting is completed, the alarm is enabled by default.
4. Setting Alarm Sound: While the alarm sound number is flashing, use the Left/Right buttons [◀️][▶️] to select one of 6 different sounds. Short-press the ALARM button [?] to confirm your selection and move to the next setting.
5. Setting Volume: While the volume level is flashing, use the Left/Right buttons [◀️][▶️] to adjust the volume. Short-press the ALARM button [?] to confirm and return to time display mode.

After the alarm is set, it is turned on by default. The alarm indicator [?] will show on the display.

Turning the Alarm Off/On

In time display mode, short-press the ALARM button [?] to turn the alarm off. The alarm indicator will disappear. To turn it back on, short-press the ALARM button [?] again. The screen will display the alarm time for 2 seconds before returning to time display mode with the alarm indicator [?].

Activating the Snooze Function

While the alarm is sounding, tap anywhere on the silicone body to activate the snooze function. The snooze indicator [?] will appear on the display. After 3 minutes, the alarm will sound again. The snooze function can be activated up to 6 times after the first alarm.

PLEASE NOTE:

• If no buttons are pressed for 10 seconds while setting the alarm, settings are saved automatically, and the device returns to time display mode.
• When the alarm is set, the night light [?] will gradually increase in brightness ten minutes before the set time. When the alarm time is reached and the alarm sounds, the time will flash on the display, and the night light will be at 100% brightness.
• The alarm will sound for 5 minutes. To stop the alarm, short-press any button.

Operating the Night Light

The built-in night light is activated by a motion sensor that responds to shaking movements. Tap anywhere on the silicone body to turn the night light on, off, or change its brightness. The setting sequence is: On at 30% brightness > 60% brightness > 100% brightness > Off.

PLEASE NOTE: The display will show the night light indicator [?] while the night light is on, helping you prevent accidentally overlooking an activated night light.

Disposal

Dispose of packaging materials properly according to their type (e.g., paper, cardboard). Contact your local waste-disposal service or environmental authority for information on proper disposal.

♻️ Do not dispose of electronic devices in household garbage!

As per European Directive 2012/19/EU on waste electrical and electronic equipment, used electronic devices must be collected separately and recycled in an environmentally friendly manner. Empty, old batteries must be disposed of at battery collection points. You can find more information about the disposal of devices or batteries manufactured after January 6, 2006, from your local waste-disposal service or environmental authority.

Drain the battery completely before disposal.

Notes on Cleaning

• Before cleaning, disconnect the device from the power supply (remove plug)!
• Only use a dry cloth to clean the exterior of the device. Do not use cleaning fluid to avoid damaging the electronics.
• Store the alarm clock in a dry environment.

Warranty & Service

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on the Bresser GmbH website is required.

You can consult the full warranty terms as well as information on extending the warranty period and details of services at:

www.bresser.de/warranty_terms