Introduction
The VOCOlinc VC1 is a smart indoor camera designed for home monitoring. It offers features like live streaming, two-way audio, and integration with smart home platforms.
Key Features & Components
The camera includes:
- 1 Lens
- 2 Lightsensor
- 3 Infrared LED
- 4 Microphone
- 5 Speaker
- 6 Indicator lights
- 7 Reset button
- 8 Power port
It is compatible with the VOCOlinc APP and Apple HomeKit.
Easy Setup Guide
Note: The device supports HomeKit platform integration under iOS systems and requires a 2.4GHz WiFi network. It does not support 5GHz WiFi.
Step 1: Add Accessory
Open the "Home" app on your iOS device. Select "+" and scan the setup code found on the camera or its packaging. Alternatively, you can search for "VOCOlinc APP" in the App Store to add devices.
Step 2: Using and Configuring
Once added, the device and its preview will appear on the Home interface. You can enter full-screen mode for preview configuration and access specific settings within the app.
Step 3: OTA and Pan/Tilt Control
For Over-The-Air (OTA) upgrades or pan/tilt rotation control, use the VOCOlinc app, as these functions are managed through it due to HomeKit platform limitations.
Warm Note: Ensure your router is connected to the Internet.
Indicator Light Status
| UI Indicator | Description |
|---|---|
| Power on and not paired (or WiFi is disconnected) | The red and blue lights flash alternately, and the horn gives a short sound. |
| WiFi configuration is successful (start to allow data stream and recording) | Blue light is always on. |
| WiFi configuration is successful (turn off allow data stream and recording) | All lights are off. |
| Homekit paired successfully | Blue light flashes 5 times. |
| Upgrade | Blue flash. |
| In video recording (real-time data stream or recording) | Red light is always on. |
| Reset button (Press and hold for 10 seconds) | The device is reset. |
| Short press of key | No function. |
Safety Warnings
- For indoor use only.
- Unplug from VC1 before cleaning.
- DO NOT clean with liquid.
- DO NOT use in wet or damp areas.
- Keep children away from VC1.
- DO NOT use the device if the casing is broken.
Compliance Information
FCC Declaration: This equipment complies with Part 15 of the FCC Rules for Class B digital devices, designed to provide reasonable protection against harmful interference. Operation is subject to two conditions: no harmful interference and acceptance of received interference. Modifications not expressly approved may void user authority.
IC Declaration: This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: no interference and acceptance of interference. Human proximity to the antenna should not be less than 20cm (8 inches) during normal operation to avoid exceeding exposure limits.
