Product Overview
The VP3 Smart Outlet offers Wi-Fi network control, allowing users to switch the outlet on/off and monitor its status wirelessly. Its built-in power meter enables tracking of power consumption for connected electronics via the VOCOlinc app.
The VP3 Smart Outlet is depicted from multiple angles. A side view shows the plug pins and the main body. A front/top view reveals the socket opening. Key components are labeled: '1' for the Power/Reset Button and '2' for the LED indicator.
| Component | Description |
|---|---|
| 1. Power/Reset Button | Quick press: Switch on/off. Press & hold for approximately 5 seconds: Factory reset. Note: All connection data will be cleared. The VP3 must be removed from the app and then added back again. |
| 2. LED indicator | Indicates Wi-Fi / Power status. |
LED Status Indication
| Status | LED Indication |
|---|---|
| Search Wi-Fi | Green blinks quickly |
| Adding a device | Green blinks slowly |
| A device added Successfully | Red blinks slowly 5 times |
| Discovering a device | Red blinks slowly 5 times |
| Connected to Wi-Fi (Outlet On) | Green stay on |
| Connected to Wi-Fi (Outlet Off) | Indication LED stay off |
| Disconnected from Wi-Fi | Red blinks quickly |
| Reset | Press & Hold for 10s, then red blinks 1 time, green blinks quickly |
| OTA in Progress | Red blinks slowly |
| OTA done | Red blinks quickly 4 times |
What's Included
- VP3 Smart Outlet
- User Manual
Features
- Smart Control
- Energy Monitoring
- Works with Apple HomeKit
- Works with Amazon Alexa
- Works with the Google Assistant
Electrical Ratings
Smart AC Outlet
Input: AC 10A 230V~, 50Hz
Output: AC Max 10A 230V~, 2300W (Pure Resistive Load)
Operating frequency: 2400~2483.5MHz
Max. transmit power: 12dBm
General use ONLY
Indoor dry location use ONLY
Safety Warnings
- Plug directly into electric outlet (not into extension cord).
- For indoor use only.
- Unplug from outlet before cleaning.
- DO NOT clean with liquid.
- DO NOT remove ground pin (round pin) as there is risk of electric shock.
- DO NOT use in wet or damp areas.
- Keep children away from VP3.
- DO NOT exceed the recommended electrical ratings.
- DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, saunas, etc.).
- DO NOT use with devices that should not be operated unattendedly.
- After switching off the main power, DO NOT operate until the main power indicator goes completely off (about 2 seconds delay).
- DO NOT use the device when the casing is broken.
- DO NOT plug the sockets into each other.
RED Declaration of Conformity (DoC)
Operating ambient temperature range: 25 °C.
Declaration of conformity: Foneric Technology Co., Ltd. declares that this VP3 is in compliance with the essential requirements and other relevant provisions of directive 2014/53/eu. A copy of the declaration of conformity can be found at Foneric Technology Co., Ltd.
CE Mark
Caution
Operation Frequency Range: 2400-2483MHz for Wi-Fi. These frequencies can be used in Europe without restriction.
Max. output power: 12dBm.
Working voltage: AC 10A 230V~, 50Hz.
Model & Parameters
Model: VP3
Parameters:
- Input: AC 10A 230V~, 50Hz
- Output: AC Max 10A 230V~, 2300W (Pure Resistive Load)
Manufacturer: Foneric Electronic Co., Ltd.
VOCOlinc APP
Download the VOCOlinc APP from the App Store or Google Play.
Setup code / Code de Configuration
