Product Overview
The VOCOlinc Smart Contact Sensor (VS1) allows users to monitor the status of doors, windows, cabinets, or safety gates. It integrates with Apple's HomeKit platform, enabling users to check the status via Siri or iOS devices. The VS1 provides real-time notifications for any changes in the status of monitored openings and can be used to trigger home automations, such as turning on a humidifier when a window is opened.
The sensor utilizes Bluetooth low energy (BLE) technology and is powered by a replaceable CR2032 battery, offering up to 6 months of battery life. Setup is designed to be quick and easy, enhancing home safety.
Note: For remote access and notifications when away from home, an Apple TV (4th generation or above), HomePod, or a compatible iPad is required to function as a Home Hub. The VS1 is exclusively compatible with Apple HomeKit.
What's In The Box
- Smart Contact Sensor
- Sensor Magnet
- Button Battery (CR2032)
- User Manual
- 3M Adhesive x2
Key Features
- Bluetooth low energy technology 5.0
- Real-time status notifications
- Automate your home by triggering scenes
- Status LED indicator
- Up to 6-month battery life (replaceable battery)
- Compact design
System Requirements
- Mobile device running iOS 12.0 or later
- Stable Internet connection (for remote access)
Product Components
The VOCOlinc VS1 Smart Contact Sensor consists of two main parts:
- Main Sensor Unit: Features a Status LED and a Reset Button.
- Magnetic Piece: Works in conjunction with the main sensor unit.
Component Details:
| # | Component | Description |
|---|---|---|
| 1 | Status LED | Indicates accessory status. |
| 2 | Reset Button | Press & hold for approximately 10 seconds for a factory reset. All connection data will be cleared, requiring the accessory to be removed from the app and added back. |
| 3 | Contact Sensor | Built-in sensor component. |
| 4 | Magnetic Piece | The magnetic component used with the contact sensor. |
Diagram Description: The main sensor unit is rectangular with rounded edges, featuring a prominent green circular indicator at the top and the VOCOlinc logo. The smaller magnetic piece is also rectangular.
LED Indicators Status
| Status | Status Indication LED Status |
|---|---|
| Pairing Process | Green - flashes |
| Device added successfully | Green - flashes slowly 5 times |
| Discovering device | Green - flashes slowly 5 times |
| Open/closed state change | Green - flashes once |
| Reset | Press and hold for 10 seconds, until a green LED stays on for 3 seconds. |
Specifications
- Battery: CR2032, DC 3V 220mAh
- Operation Temperature: 0–40 °C
- Purpose of control: Electrical control
- Type of action: Type 1.C
- Control Pollution Degree: PD 2
- Number of operation cycles: 10,000
- Communication Protocol: Bluetooth 5.0
- Signal System: BLE 1M/BLE 2M
- Operating frequency: 2402~2483.5MHz
- Max. transmit power: 0dBm
- Usage: Indoor Use Only
Installation Guide
Follow these steps for installation:
Open the battery cover located on the back of the contact sensor using tools. Insert the button battery (CR2032) into the contact sensor. Refer to the "Pairing" section to begin the pairing process.
Diagram Description: Illustrations show the battery compartment of the main sensor being opened and a CR2032 button battery being inserted. The two sensor states, "Closed" and "Open", are depicted conceptually.
After pairing is complete, test the sensor by moving the two pieces close to and apart from each other. The LED should light up each time. If it functions correctly, remove the protective film from the adhesive backing and stick the two parts to the relevant surfaces.
Diagram Description: An illustration shows a hand peeling off the protective film from the adhesive side of the main sensor unit, preparing it for mounting.
During installation, ensure the dot marker on each of the two pieces is aligned correctly. Also, verify that the gap between the two halves is less than 20mm when the door or window is closed. Spacers can be used to level the two pieces if necessary.
Diagram Description: A diagram illustrates the correct alignment of the main sensor and magnetic piece, showing the dot markers aligned and indicating the maximum allowed gap of 20mm between them when the door/window is closed.
Important Tips
- Install the contact sensor part onto the fixed, non-moving section of the door or window (e.g., the door frame). Place the magnet piece on the moving part (e.g., the door itself). The surfaces where the sensor and magnet will be attached must be smooth for proper adhesion.
- To receive real-time notifications regardless of your location, an Apple TV (4th generation or above), HomePod, or a suitable iPad is required to function as a Home Hub. The VS1 is exclusively compatible with Apple HomeKit.
Pairing Instructions
To pair your VOCOlinc VS1 Smart Contact Sensor:
- Ensure your iOS device is connected to the internet and that Bluetooth is enabled.
- Download and open the free VOCOlinc app from the Apple App Store.
- Enter "pairing mode" on the VS1 sensor by pressing and holding the reset button for 10 seconds, until a green LED stays illuminated for 3 seconds.
- Within the VOCOlinc app, navigate to the "Home" menu and tap the "+" icon located at the top left corner.
- Follow the on-screen instructions within the app to complete the pairing process.
App Screenshot Description: The VOCOlinc mobile application's 'Home' screen is displayed, showing interface elements for managing smart home devices, including buttons for 'Add Device', 'ALL ON', and 'ALL OFF', along with controls for individual devices.
Warnings
- The battery must be removed from the device before it is scrapped.
- The device must be disconnected from the supply mains (where appropriate) when removing the battery.
- Batteries must be disposed of safely according to regulations.
- Using incorrect battery types can cause damage to people or the accessory.
Compliance and Declarations
FCC Declaration
Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Declaration
Caution: This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
In order to avoid the possibility of exceeding the ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
EU Declaration of Conformity (DoC)
Foneric Technology Co.,Ltd. declares that the Declaration of Conformity (DoC) is issued under their sole responsibility and pertains to the following product:
- Product name: Smart Contact Sensor
- Trade name: VOCOlinc
- Type or Model: VS1
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
- RE Directive 2014/53/EU: ROHS Directive 2011/65/EU
The following standards and technical specifications have been applied for RE Directive 2014/53/EU:
- Safety and Health (Article 3.1a): EN 62368-1:2014+A11:2017
- EMC (Article 3.1b): ETSI EN 301 489-1 V2.1.1 (2017-02); ETSI EN 301 489-17 v3.1.1 (2017-02)
- RF Spectrum Efficiency (Article 3.2): ETSI EN 300 328 V2.1.1
- Special requirements invoked (Article 3.3): n/a
The following standards and technical specifications have been applied for the other European Legislation:
- ROHS Directive 2011/65/EU
Signed on behalf of: Foneric Technology Co.,Ltd.
Address: 4F, Fuxing Bldg, BinlangRoad, Futian Free Trade Zone, Shenzhen, Guangdong, China
Place and date of issue (of this DoC): 09/03/2020
Name: Howard Dong
Function: Project Director
VOCOlinc APP
The VOCOlinc APP is available for download on the Apple App Store. It is used for managing and controlling the VS1 Smart Contact Sensor.
App Icon Description: The VOCOlinc mobile application icon is displayed.
Note: You may remove the QR Code sticker on the sensor and keep it in a safe place for future reference.
