VOCOlinc VH1 MistFlow Smart Humidifier

Product Overview and User Guide

Description

The VOCOlinc VH1 MistFlow Smart Humidifier/Diffuser is compatible with Apple HomeKit, Amazon Alexa, and the Google Assistant. Users can check its status or control it wirelessly via voice commands or the VOCOlinc/Home app using a 2.4GHz Wi-Fi network.

It features a customizable rainbow-spectrum mood light, allowing users to select colors suitable for their mood or occasion. Automation features include scheduling, auto-target humidity, and various light effects.

The MistFlow enhances health and sleep for families. Its substantial capacity and mist output are ideal for medium-sized rooms and offices, covering up to 430 sq ft (40 sq m). The top-fill design simplifies cleaning and refilling.

Controls

The device features two primary touch controls:

Key Components

The humidifier consists of several key parts:

Internal components include:

Specifications

FeatureDetails
Power Requirements120V AC 60Hz (US) / 220-240V AC 50Hz (EU)
Operating Temperature1°C to 40°C / 33.8°F to 104°F
Rated Power30 W
Water Tank Capacity2.5 L
Touch Button FunctionalityLight / Mist control
Wireless NetworkWi-Fi 2.4GHz 802.11 b/g/n
Applicable AreaUp to 430 ft² / 40 m²
Mist Level ControlHigh, Low (Touch Button); 1-5 Level (VOCOlinc app)
Mood LightRGB Rainbow Spectrum
Firmware UpdateOTA (requires VOCOlinc app)
On-device LED IndicatorsPower status, Mist level (High, Low)
Power Cord Length4.92 ft or 150 cm
Dimensions (mm)180 x 180 x 285
Weight (kg)1.1

Factory Reset

To perform a factory reset, simultaneously press and hold both the LIGHT and MIST buttons for 10 seconds. The mood light will blink and then illuminate, indicating the device is in pairing mode. Follow the instructions in the VOCOlinc/Home app to reconnect the device to your 2.4GHz Wi-Fi network.

What's Included

Firmware Update

To ensure the best experience with VOCOlinc products, it is recommended to update the firmware when new versions are available. Follow these steps:

  1. Open the VOCOlinc app.
  2. Long press the device icon to access its main page.
  3. Locate "Firmware update" and tap "Update" when prompted.

Note: Firmware update notifications will only appear for devices that are currently reachable and have an available update. It is crucial to keep the VOCOlinc app running during the update process and avoid minimizing, closing, or interrupting it until the update is successfully completed to prevent potential issues.

Warnings

Accidental Leakage

If the unit is knocked over or tipped during use, follow these steps to prevent damage:

  1. Unplug the device and remove the cover.
  2. Empty any remaining water from the water tank.
  3. Gently shake out residual water and allow the device to air dry in an open space for at least 24 hours.

Maintenance

After continuous operation or every 3-5 days, clean the device as follows:

  1. Unplug the device and remove the cover.
  2. Empty any remaining water from the tank.
  3. Clean the device with warm water, adding a few drops of mild dishwashing detergent. Wipe gently with a dry cloth.
  4. Avoid using acids or enzyme-based detergents, as they can release hazardous gases or cause malfunctions. Always opt for a mild detergent.
  5. If the humidifier will not be used for an extended period, drain the water from the tank.

Regulatory Compliance

FCC Declaration

Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Declaration

Caution: This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. In order to avoid the possibility of exceeding the ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

VOCOlinc App

Download the VOCOlinc app to control your smart humidifier:

[Download on the App Store]

[Get it on Google Play]

Setup code: [Code de Configuration]

PDF preview unavailable. Download the PDF instead.

manual-klimatprodukter-vocolinc-w125799814 Adobe PDF library 15.00

Related Documents

Preview Vocolinc VHI MistFlow Smart Humidifier User Manual
Comprehensive user manual for the Vocolinc VHI MistFlow Smart Humidifier, detailing setup, operation, cleaning, app integration, voice control, and specifications.
Preview VOCOlinc VP5 Smart Plug Quick Start Guide
A comprehensive guide to setting up and using the VOCOlinc VP5 Smart Plug, featuring compatibility with Apple HomeKit, Amazon Alexa, and Google Assistant. Learn about its features, electrical ratings, safety warnings, and FCC/IC declarations.
Preview VOCOlinc VP3 Smart Outlet - Wi-Fi Plug with Energy Monitoring
Learn about the VOCOlinc VP3 Smart Outlet, a Wi-Fi enabled smart plug. It offers remote control, energy monitoring, and compatibility with Apple HomeKit, Amazon Alexa, and Google Assistant. Details include product overview, LED status, electrical ratings, safety warnings, and conformity information.
Preview VOCOlinc VP5X SmartBar Plug User Manual
User manual for the VOCOlinc VP5X SmartBar Plug, detailing features, setup, safety warnings, and technical specifications. Compatible with Apple HomeKit, Amazon Alexa, and Google Assistant.
Preview VOCOlinc VS1 Smart Contact Sensor | HomeKit Compatible Security
Discover the VOCOlinc VS1 Smart Contact Sensor for enhanced home security. Monitor doors and windows with Apple HomeKit integration, real-time notifications, and easy setup. Learn about features, specifications, and installation.
Preview DL2201 Smart Desk Lamp User Manual and Specifications
Discover the features, system requirements, and safety guidelines for the VOCOlinc DL2201 Smart Desk Lamp. Learn how to control brightness, color temperature, and more via the VOCOlinc app.
Preview VOCOlinc VC1 Smart Indoor Camera Setup and User Guide
Learn how to set up and use the VOCOlinc VC1 Smart Indoor Camera with this comprehensive guide, covering installation, app integration, and safety information.
Preview Atuvos Tag AT2201 FCC Part 15.247 Test Report
This document is a test report for the VOCOLINC Atuvos Tag (Model AT2201) conducted by Shenzhen CTL Testing Technology Co., Ltd., detailing compliance with FCC Part 15.247 standards for radio frequency devices.