Pyle Audio Mixers User Guide

Introduction

This document provides instructions and specifications for Pyle audio mixers: the PMX462 (3-Channel), PMX464 (4-Channel), and PMX466 (6-Channel). Please read all instructions carefully before using this product and retain this owner's manual for future reference.

Contact Information:

Questions or Comments? We are here to help!

Phone: 1.718.535.1800

Website: PyleUSA.com/ContactUs

Pyle PMX462: 3-Channel Audio Mixer

Description: 3-Channel Audio Mixer with USB Interface, Built-in FX Processor, MP3 Player, XLR & 6.35 Jack Connectors.

Features:

• Rugged, Metal Chassis & Exquisite Panel on 2 Sides
• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Selectable Sound Effects: Normal, Rock, POP, Classical, Jazz, Country
• Flexible Connectivity for Various External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• 2-Band EQ & Pan on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility

What's in the Box:

• Mixer Interface
• USB Cable
• Wall Adapter

Technical Specs:

California Prop 65 Warning: This product may expose you to chemicals known to the state of California to cause cancer, birth defects and other reproductive harm. Do not ingest. For more info go to: www.P65warnings.ca.gov

Pyle PMX464: 4-Channel Audio Mixer

Description: 4-Channel Audio Mixer with Recording Interface, Built-in FX Processor/AUX Input & MP3 Player, 2 XLR I/O Connectors.

Features:

• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Selectable Sound Effects: Normal, Rock, POP, Classical, Jazz, Country
• Flexible Connectivity for Various External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• 2-Band EQ & Pan on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• 2 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility

What's in the Box:

• Mixer Interface
• USB Cable
• Wall Adapter

Technical Specs:

Pyle PMX466: 6-Channel Audio Mixer

Description: 6-Channel Audio Mixer w/ Recording Interface, Built-in Multi-FX Processor/AUX Input & MP3 Player, 4 XLR I/O Connectors.

Features:

• Rugged, Metal Chassis & Exquisite Panel on 2 Sides
• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Selectable Sound Effects: Normal, Rock, POP, Classical, Jazz, Country
• Flexible Connectivity for Various External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• 2-Band EQ & Pan on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• 4 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility

What's in the Box:

• Mixer Interface
• USB Cable
• Wall Adapter

Technical Specs:

Operation and Maintenance

ATTENTION: To avoid the possibility of malfunction, product damage, data loss, or harm to other property, please follow the points below.

Operation and Maintenance:

• Do not use the device near a TV, radio, stereo equipment, mobile phone, or other electronic devices. Doing so may cause noise interference.
• To prevent panel discoloration, unstable operation, or internal damage, do not expose the device to excessive dust, vibration, or extreme temperatures (e.g., direct sunlight, near a heater, or inside a car during the day).
• Do not place vinyl, plastic, or rubber objects on the device, as they may discolor the panel.
• When cleaning the device, use a dry, soft cloth. Avoid using paint thinners, solvents, cleaning fluids, or chemically treated wiping cloths.
• Rapid or drastic temperature changes may cause condensation inside the device. For example, moving the device between locations or turning an air conditioner on or off can create condensation. If condensation occurs, leave the device off for several hours to dry completely before use.
• Avoid setting all controls to their maximum. Depending on the connected devices, this may cause feedback or damage the speakers.
• When powering on your audio system, always turn on the power amplifier last to prevent speaker damage. When turning the system off, turn off the power amplifier first for the same reason.

Precautions When Using the USB 2.0 and 5V DC Terminals:

When connecting the USB 2.0 terminal to a computer, follow these precautions to avoid crashes, malfunctions, or data loss:

• Use a USB 2.0 cable (USB 3.0 cables are incompatible).
• Disable any power-saving modes (e.g., suspend, sleep, standby) on the computer before connecting to the USB terminal.
• If the computer or mixer crashes, restart the application software or computer operating system, or disconnect and reconnect the mixer before powering it on again.

Controls and Interface

The mixers feature various input and output jacks, controls, and indicators. The following describes the common controls and functions across the models.

Channel Input and Output Descriptions:

Diagrams: The PDF includes diagrams illustrating the front panels of the PMX462, PMX464, and PMX466 mixers, with numbered controls corresponding to the descriptions below.

Textual Description of Controls:

1. [MIC/LINE]: Mono input for connecting microphones, musical instruments, or audio devices (e.g., CD players). Supports XLR and unbalanced 1/4" plugs.
2. [GAIN] Controller: Adjusts the basic volume of each channel. If the [PEAK] LED indicator flashes, reduce the volume by turning this control counterclockwise.
3. [HIGH] Controller: Adjusts treble tones by enhancing or attenuating up to +15 dB at 12 kHz.
4. [LOW] Controller: Adjusts bass tones by enhancing or attenuating up to +15 dB at 80 Hz.
5. [FX] Controller: Adjusts the signal level sent to the reverb line. For stereo channels, mixes L and R signals before sending them to the reverb line.
6. [PEAK] LED Indicator: Flashes when input or equalized signal volume is too high. Reduce the volume using the [GAIN] controller.
7. [LEVEL] Controller: Balances the volume of each channel.
8. [STEREO INPUT] Jacks: Connect to line-level devices (e.g., electric keyboards) via 6.35 mm plugs. When only the L (MONO) jack is connected, the mixer outputs the same mono signal to both L and R outputs.
9. [AUX IN] 3.5 mm jack: Auxiliary input for external devices.
10. [MAIN OUT] Output: Connect to an active speaker or amplifier.
11. [SUB OUT]: Sends audio signals to the SUB output for monitoring or recording.
12. [PHONES] Jacks: Support 3.5 mm or 6.35 mm stereo headphone plugs.
13. [POWER] Button: Powers the mixer on or off.
14. [CH/USB] Switch: Selects the input signal from either "channel" or "USB."
15. [+48V PHANTOM POWER] Button/LED: When enabled, provides DC +48V phantom power to XLR plugs on mono MIC inputs. Necessary for condenser microphones requiring phantom power.
16. [MAIN LEVEL] Fader: Adjusts the overall volume output from the [MAIN OUT].
17. [SUB] Fader: Controls the SUB output volume.
18. [PHONES LEVEL] Controller: Adjusts headphone volume.
19. [DSP Select]: Assigns one of 16 effect programs (e.g., Hall, Room, Reverb) to the mix.
20. [DELAY] Controller: Adjusts the depth of the reverb effect.
21. [PARAMETER CONTROL IN ADDING DIGITAL EFFECTS]: Fine-tunes effect depth, speed, etc.
22. [FX] Controller: Adjusts the volume of the effect.
23. [POWER INDICATOR]: Lights up when the mixer is powered on.
24. [LEVEL INDICATORS]: Displays signal levels from [MAIN OUT]. Lower the volume using the [LEVEL] controller if the [PEAK] indicator shows red.

MP3 Function and Built-in DSP

MP3 Function Introduction:

A. Wireless Bluetooth Connection:

• Press the "MODE" button to select Bluetooth mode. The BT icon will flash on the display.
• Open Bluetooth settings on your device to pair. A sound prompt confirms successful pairing.

B. Button Functions:

• [ /SET]: Press once to pause playback. Press again to resume.
• [ /-]: Short press to play the previous track. Press and hold to reduce volume.
• [►►►/+]: Short press to play the next track. Press and hold to increase volume.
• [MODE]: Switches between USB, REC, and Bluetooth modes.

C. USB Recording:

• Press "MODE" to select REC.
• Press [ /REC] to start recording. The LED screen shows recording time.
• Press [ /REC] again to pause recording.

D. Computer Sound Card:

When connected via USB cable, the mixer enters PC playback mode automatically. Wait for driver installation upon first connection.

E. EQ Control:

Choose from six sound effects: Normal, Rock, Pop, Classic, Jazz, and Country.

Built-in DSP:

You can assign one of 16 effect programs to your mix. The effects list is as follows:

Connectivity and Power Supply

USB for Data Transfer and Record, and Power Supply:

Diagrams illustrate the USB connection for data transfer, recording, and power supply. This involves connecting the mixer to a PC, power bank, or power socket via USB.

Specifications for USB Power:

• Output voltage: 4.8 V to 5.2 V
• Output current: 1A or higher

FCC Information

WARNING:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

Register Product

Thank you for choosing PyleUSA. By registering your product, you ensure that you receive the full benefits of our exclusive warranty and personalized customer support. Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

Start Here: PyleUSA.com/pages/register

Model Number: PMX462 (for registration example)