PYLE Wireless BT Streaming Mini Line Mixer User Guide

GENERAL SPECIFICATIONS

Features

• Flexible Stereo/Mono Switching Inputs
• Ultra-low Noise Design with High Headroom
• Built-in USB Sound Card, for Computer Playing & Recording
• Input level Control for Each Channel
• DC 5V Power Supply, or PC Power Supply
• Rugged Metal Chassis and Compact Size

Bluetooth Connectivity:

• Instantly Receives Wireless Music Streaming Audio
• Works with All of Your Favorite Devices (iPhone, Android, Smartphones, iPad, Tablet, MP3 Player, etc.)
• Bluetooth Version: 5.0
• Bluetooth Network Name: 'KAM-8T'
• Bluetooth Wireless Range: 50' Feet

What's in the Box:

• Mixer
• (2 Flat Plug) Power Adapter
• USB Cable

Technical Specs:

• Power Input: DC 5V, 1A
• Voltage: 100-240V
• USB Sound Card: 2.0 Type-C
• Frequency Response: 20Hz-20KHz
• Total Harmonic Distortion: <0.5%@+4dBu

Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com

SOCKET LIST (PIN ARRANGEMENT)

Input and output jacks	Polarity	Structure
INPUT	Connector: L Ring: R Shell: Ground	TRS plug
OUTPUT	Connector: L Ring: R Shell: Ground	TRS plug
INPUT (MONO)	Connector: Signal Shell: Ground	TS plug

A diagram shows a mixer connected to a guitar, drum, keyboard, and audio player via various inputs and outputs, including USB connections for PC and power supply.

CONTROLS & FUNCTIONS

Diagrams illustrate the front and top panels of the PMAX4, PMAX6, and PMAX8 mixers, labeling various input jacks, output jacks, and control knobs.

1. [LEVEL] Controller: Controls the input level of each channel to balance the volume.
2. [STEREO/MONO] Converting switch for 6.35 input signals: Press down for MONO, bounce up for STEREO.
3. [OUTPUT] Controller: Adjusts the volume of the main output. Note: Excessive high volume output may damage the output operation equipment (such as speakers, headphones, etc.). Please turn the output controller to zero or an appropriate volume position before turning on the device.
4. [1-8 CHANNEL OUTPUT MIX L-R] Button: Mixes the audio output of 1-8 inputs for synchronized A/B output. Note: Turn the A/B output knob to minimum volume before pressing this button.
5. [BT/USB] Converting switch: Bounced up for Bluetooth input, pressed down for USB input.
6. Power and Bluetooth indicator: Lights up when the mixer is powered on. Flashes when connecting Bluetooth; slows down after connection.
7. 6.35 Input jack: Connects line-level signal sources (mono or two-channel). Avoid high input volume from the source to prevent distortion.
8. 6.35 Output jack: Transmits output signal.
9. Type-C terminal: For data transferring, recording, and power supply. Connects to a computer for power and audio data transfer. Supports stereo play and record with 24 Bit, 48kHz sampling rate. For power supply using a power socket or power bank, ensure output voltage is 4.8V to 5.2V and output current is 1A or more.
10. [GND] Connection: Connect the ground wire of each device shell to reduce interference noise and increase safety when connecting multiple devices.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.