POCO M7 Pro 5G

Product Overview

This document provides essential information for the POCO M7 Pro 5G smartphone, including regulatory compliance, safety guidelines, and technical specifications.

The device is identified by model number 2409FPCC4G. The marking 2409 indicates that this product will be released after September 2024.

For the complete user manual, please scan the QR code provided in the original documentation.

Device Layout

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this mobile phone complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at www.mi.com/en/certification.

RF Exposure Information (SAR)

This device meets the EU's Specific Absorption Rate (SAR) limits for the general population or uncontrolled exposure (maximum permissible SAR value for 10 grams of tissue when worn on the body and close to the head: 2.0 W/kg), as defined by Council Recommendation 1999/519/EC, the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines, and Directive 2014/53/EU (RED).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during head use and at a distance of 5 mm from the body. Compliance with SAR requirements for body-worn operation is confirmed at a distance of 5 mm between the device and the human body. The device should be worn at least 5 mm away from the body to ensure RF exposure levels are within the permissible limits.

SAR Certification Information (Highest SAR Level)

Frequency Bands and Power

This mobile phone supports the following frequency bands in the EU with maximum radio frequency power:

5G connectivity depends on the country, operator, and user's operating conditions.

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed or used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets government requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The standard for RF exposure used a unit of measurement known as the Specific Absorption Rate (SAR).

The SAR limit set by the FCC is 1.6 W/kg. This device was tested for body-worn operation. Testing confirmed that the device complies with FCC RF exposure guidelines when used with an accessory that does not contain metal and positions the device at least 1.0 cm from the body. Compliance with RF exposure requirements for body-worn accessories containing metal components has not been verified and certified, and therefore, the use of such accessories should be avoided. Any accessories used for body-worn operation of the device must ensure a distance of at least 1.0 cm between the device and the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with FCC limits for Class B devices, shielded cables must be used with this equipment.

Ukraine Compliance

In accordance with the Technical Regulation on Radio Equipment, approved by the Cabinet of Ministers of Ukraine Resolution No. 355 of May 24, 2017, Xiaomi Communications Co., Ltd. hereby declares that the radio equipment type: Mobile Phone, brand "POCO", model 2409FPCC4G (POCO M7 Pro 5G) complies with the Technical Regulation on Radio Equipment. The full text of the declaration of conformity is available at www.mi.com/en/certification.

This mobile phone can operate in the following frequency bands in Ukraine with maximum radio frequency power:

Electronic Mark

This device features an electronic mark with certification information. To access it, navigate to Settings > About phone > Certification, or search for "Certification" in the Settings search bar.

Reset Instructions

Path: Settings > About phone > Reset settings

You can quickly erase local data on the device using the "Reset settings" function. Data that can be erased includes accounts, contacts, photos and videos, applications, backups, SD card data, and other objects on this device.

Safety Precautions

• Comply with all applicable laws and regulations that restrict the use of mobile phones in certain situations or environments.
• Do not use the phone in potentially explosive environments, such as near gas stations, in enclosed spaces on ships, in fuel or chemical storage, or in vehicles transporting them, as well as in places where the air may be saturated with chemicals or fine particles like sand, dust, or metal powders. Observe all posted signs instructing to turn off wireless devices, such as your phone or other radio equipment. Turn off your mobile phone or wireless device in explosive areas or where required to turn off two-way radio devices or electronic devices to prevent potential hazards.
• Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Always adhere to the current rules and regulations of hospitals and medical centers. If you have a medical device, consult your doctor and the device manufacturer to determine if the phone may interfere with its operation. To avoid potential interference with a pacemaker, always keep the mobile phone at least 15 cm away from it. To do this, hold the phone to the ear on the side opposite the pacemaker and do not carry it in a breast pocket. To avoid interfering with medical equipment, do not use the phone near hearing aids, cochlear implants, or similar devices.
• Comply with all airline safety regulations and turn off the phone on board an aircraft when required.
• When driving a vehicle, use the phone in accordance with applicable traffic laws and regulations.
• To avoid electric shock from lightning, do not use the phone outdoors during a thunderstorm.
• Do not use the phone for calls while it is charging.
• Do not use the phone in high-humidity locations, such as bathrooms. This may lead to electric shock, injury, fire, or damage to the charger.

Charging Information

Connect the POCO M7 Pro 5G to a computer using a USB data cable.

Use the USB cable included in the box with a "Mi" brand charger, and then connect it to a power strip.

You can also use a third-party charger that complies with the USB 2.0 standard, higher protocol standards, and meets the requirements of the International Standard for Information Technology Equipment Safety (IEC 60950), Audio/Video, Information and Communication Technology Equipment Standard (IEC 62368-1), and the relevant laws and regulations of your country or region.

Note that the product supports chargers with a maximum output power of 45W. The maximum voltage should not exceed [11V], and the maximum current should not exceed [4.1A].

Using other chargers that do not meet the above requirements for charging the product may damage the product and cause harm to personal or property safety.

The power supplied by the charger should be between a minimum of [10]W required by the radio equipment and a maximum of [45]W for maximum charging speed. USB PD Fast Charging. ⚡

Legal Information

This device can be operated in all EU countries. Comply with state and local rules applicable in the territories where the device is used. This device is prohibited from use indoors only if it operates in the frequency band from 5250 to 5350 MHz in the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Wi-Fi connectivity support (including Wi-Fi frequency bands, Wi-Fi standards, and other functions approved by the IEEE 802.11 standard specification) may vary depending on the region and support for local networks. This function may be added wirelessly (OTA) when and where needed.

2.4 GHz Band Restriction

Norway: This section does not apply to the geographical territory within a radius of 20 km from the center of Ny-Ålesund.

Ensure that the power adapters used comply with the current national and international and regional safety standards.