POCO M7 Pro 5G Quick Start Guide

Welcome and Initial Setup

Thank you for choosing the POCO M7 Pro 5G. To turn on your device, press and hold the power button. Follow the on-screen instructions to complete the setup process.

For detailed information and user guides, please visit our official website: www.mi.com/global/service/userguide

Device Overview

Diagram Description: A visual representation of the POCO M7 Pro 5G smartphone. The front view displays the full screen. On the right side, you will find the volume buttons and the power button located below them. The bottom edge of the device features a USB Type-C port.

SIM Card Slots: The device supports Nano-SIM cards. Two tray configurations are illustrated:

• ? Tray 1: Supports a ? Micro SD card and a ? Nano-SIM.
• ? Tray 2: Supports a ? Nano-SIM only.

Important: Do not insert SIM cards that are not standard into the SIM card slot, as they may cause damage. WARNING: Do not attempt to disassemble the device.

Environmental and Battery Information

ℹ️ WEEE (Waste Electrical and Electronic Equipment): Special precautions must be taken to dispose of this product safely. In the EU, this marking indicates that the product should not be disposed of with household waste. Please recycle responsibly to prevent harm to the environment or human health from improper waste disposal and to promote the sustainable reuse of material resources. You can safely recycle your device by using the return and collection systems available, or by contacting the retailer where the product was purchased.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Avoid hearing damage by not listening to high volume levels for extended periods.

For additional safety information and precautions, please visit: www.mi.com/en/certification

Important Safety Information

Please read all safety information below before using the device:

• Using unapproved cables, power adapters, or batteries may cause fire, explosion, electric shock, or other hazards, or damage the device.
• The device's operating temperature range is 0 °C to 40 °C. Using the device in an environment outside this temperature range may damage the device.
• If the device has a built-in battery, do not attempt to replace the battery yourself. Doing so may damage the battery or the device.
• Charge the device only with the included or an approved cable and power adapter. Use only approved accessories compatible with the device.
• When charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Improper handling of batteries may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to local regulations.
• Do not disassemble, strike, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not place the battery in a high-temperature environment. Overheating may cause an explosion.
• Do not disassemble, strike, or crush the battery, as this may lead to battery leakage, overheating, or explosion.
• Do not burn the battery, as this may cause fire or explosion.
• The user is not allowed to remove or modify the battery. Disassembly or repair of the battery must only be performed by an authorized repair center of the manufacturer.
• Keep the device dry.
• Do not attempt to repair the device yourself. If any part of the device is not functioning properly, contact Mi customer service or take the device to an authorized repair center.
• Connect other devices according to their user manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Measures

Follow all applicable laws and regulations that restrict the use of mobile phones in specific situations and environments.

• Do not use the phone at gas stations or in explosive environments or environments with explosion risk, including fuel-filling areas, on board boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powder. Follow all signs to turn off wireless devices such as phones or other radio equipment. Turn off the mobile phone or wireless device when in blasting areas or in areas where it is required that "two-way radios" or "electronic devices" be turned off to prevent potential hazards.
• Do not use the phone in hospital operating rooms, intensive care units, or intensive care units. Always follow all rules and regulations for hospitals and medical centers. If you have a medical device, consult your doctor and the device manufacturer to determine if the phone can interfere with the device's function. To avoid potential interference with a pacemaker, always maintain a distance of at least 15 cm between the mobile phone and the pacemaker. You can do this by using the phone on the ear opposite the pacemaker and not carrying the phone in your breast pocket. Avoid interference with medical equipment by not using the phone near hearing aids, cochlear implants, or other similar devices.
• Follow all aircraft safety regulations and, if necessary, turn off the phone on board aircraft.
• When driving a vehicle, use the phone in accordance with applicable traffic laws and regulations.
• Avoid being struck by lightning by not using the phone outdoors during thunderstorms.
• Do not use the phone to make calls while it is charging.
• Do not use the phone in places with high humidity, such as bathrooms. Doing so may lead to electric shock, personal injury, fire, and damage to the charger.

Charging

To charge:

• Connect the POCO M7 Pro 5G to your computer using a USB data cable.
• Connect a Mi brand charger to a power outlet using the USB cable included in the gift package.
• Note that the product is compatible with chargers with a maximum power of 45 W.

Charging Compatibility

You can also use a third-party charger that complies with USB2.0 protocol standards or higher and meets the requirements of the International Information Technology Equipment Safety Standard (IEC 60950), Audio/video, Information and Communication Technology Equipment Standard (IEC 62368-1), and the laws and regulations applicable in your country or region. Using alternative chargers that do not meet the above standards to charge this device may damage the product, your personal safety, and your property.

The power delivered by the charger must be between at least ⚡ 10 watts and a maximum of ⚡ 45 watts, which is required to charge the radio equipment at the highest charging speed. USB PD fast charging.

Regulatory Compliance

Safety Notice: Update your phone's operating system using the built-in software update feature or visit one of our authorized service centers. Updating the software in any other way may damage the device or lead to data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity: Xiaomi Communications Co., Ltd. hereby declares that this digital GSM-/ GPRS-/EDGE-/UMTS-/LTE/5G NR mobile phone with Bluetooth and Wi-Fi 2409FPCC4G complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

RF Exposure Information (SAR): This device complies with the SAR limits (Specific Absorption Rate) for the general population/uncontrolled exposure (localized SAR per 10 grams for head and trunk, limit: 2.0 W/kg) according to the Council Recommendation 1999/519/EC, ICNIRP guidelines, and RED (Directive 2014/53/EU).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm.

SAR compliance for body-worn operation is based on a separation distance of 5 mm between the device and the human body. This device should be worn at least 5 mm from the body to ensure that the RF exposure level is compatible with or lower than the reported level. When attaching the device near the body, use a belt clip or holster that does not contain metal parts and allows a separation of at least 5 mm between the device and the body. RF exposure compliance has not been tested or certified with any accessory containing metal worn on the body, and the use of such an accessory should be avoided. All accessories used with this device for body-worn operation must keep the device at least 1.0 cm from the body.

Certification Information (Highest SAR): SAR 10 g, limit: 2.0 W/kg, SAR value: Head: 0.958 W/kg, Body: 0.993 W/kg (5 mm separation).

Legal Information

This device may be used in all EU member states. Follow national and local regulations where the device is used.

This device is intended for indoor use only when operated in the frequency ranges 5250-5350 MHz in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV, LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards, and other features according to the IEEE 802.11 specification) may vary depending on regional availability and local network support. Functionality may be added via OTA where applicable.

2.4 GHz band restrictions: Norway: This subsection does not apply to the geographical area within a radius of 20 km from the center of Ny-Ålesund.

Ensure that the network adapters used comply with applicable national regulations and international and regional safety standards.

Frequency Bands and Power

This mobile phone has the following frequency bands only in EU regions and maximum radio frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE band 42: 26 dBm
• 5G NR band n1/n3/n7/n8/n20/n28/n38/n41: 26 dBm, 5G NR band n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5 150 to 5 250 MHz: 23 dBm, 5 250 to 5 350 MHz: 20 dBm, 5 470 to 5 725 MHz: 20 dBm, 5 725 to 5 850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m @ 10 m

5G connection depends on country, operator, and user environment.

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Information on RF Exposure (SAR)

This device meets government requirements for exposure to radio waves. The device is designed and manufactured not to exceed the exposure limits for radio frequency energy (RF). The exposure standard for wireless devices employs a unit of measurement known as the specific absorption rate, or SAR.

The SAR limit set by the FCC is 1.6 W/kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that does not contain metal and positions the device at least 1.0 cm from the body. Compliance with RF exposure for any body-worn accessories containing metal has not been tested or certified, and the use of such an accessory should be avoided. All accessories used with this device for body-worn operation must keep the device at least 1.0 cm from the body.

FCC Notice

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this device to ensure compliance with FCC Class B limits.

E-label

This device has an electronic label for certification information. To access it, go to Settings > About phone > Certification, or open Settings and type "Certification" in the search field.

Product Details

Model

Model: 2409FPCC4G

2409 indicates that this product is launched after September 2024.

Disclaimer

This Quick Start Guide is published by Xiaomi or its local subsidiary. Improvements and changes to this guide necessitated by typographical errors, inaccuracies in current information, or improvements to software or equipment may be made by Xiaomi at any time and without prior notice. However, such changes will be incorporated into new online versions of the Quick Start Guide (see details at www.mi.com/global/service/userguide). All illustrations are for illustrative purposes only and may not accurately represent the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's postal address: No. 019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian, Beijing, China, 100085

Contact: contact@support.mi.com

Brand: POCO

Model: 2409FPCC4G

© Xiaomi Inc. All rights reserved.