Quick Start Guide

V1.0.0

1. Overview

* Smartphone not included.

[1] ? Power button

[2] ▶️ Trigger button

[3] ⚙️ F2 button

[4] ? Shutter button

[5] ?️ Joystick

[6] ? Mode button

[7] ➡️ R button

[8] ? Auto rotation button

[9] ⬅️ L button

[10] ? F1 button

[11] ?️ Knob function switching button

[12] ?️ FPV button

[13] ?️ Handle

[14] ?️ Multifunction knob

[15] ? Smartphone holder

[16] ↔️ Cross arm

[17] ↩️ Roll axis

[18] ? Roll lock

[19] ↕️ Tilt axis

[20] ? Tilt lock

[21] ↔️ Cross arm

[22] ➡️ Pan axis

[23] ? Pan lock

User Manual & App Download

Scan the QR code to get the latest user manual or download it from the official website: feiyu-tech.com/feiyu-scorp-mini-p/

Download the App: Scan the QR code to download the App, or search for "Feiyu ON" in the App Store or Google Play. * Requires iOS 9.0 or above, Android 6.0 or above.

iOS | Android

2. Getting Started

2.1 Charging

Please fully charge the battery before powering on the gimbal for the first time. Charging with USB-C cable, supports quick charge.

2.2 Adjust the gimbal to balancing position

The gimbal is folded by default. Please unlock all three axes and adjust the gimbal to the balancing position, then lock the three axes.

Gimbal folded position

Gimbal balancing position

3. Mounting the Smartphone

Ensure you have completed all steps in "2. Getting Started" and the gimbal is adjusted to the balancing position. It is recommended to remove the smartphone case before mounting.

Example: Horizontal Mounting:

Power off the gimbal or enter sleep mode, then rotate the smartphone holder to prepare for landscape shooting.
Extend the smartphone holder, place your smartphone in the center.

Note: The gimbal must be off or in sleep mode before switching mounting direction.

4. Gimbal Balancing

Please balance the gimbal before powering it on. Power off or enter sleep mode before balancing.

Tutorial Videos

? Unlock the three axis locks, observe the tilt direction of the mobile phone.
If the phone is tilted, its center of gravity is towards that end. ? Loosen the fixing knob, and ➡️ move the cross arm in the opposite direction, until the cross arm maintains horizontal balance.
? Tighten the fixing knob.

5. Operation

5.1 Power ON/ OFF

Before powering on, ensure the gimbal is balanced and all three axes are unlocked. If not all axes are unlocked, the gimbal will enter sleep mode for protection. Single tap the power button to wake up the gimbal after unlocking all axes. Long press the power button and release when you hear the beep sound to power on/off.

5.2 Follow Mode Introduction

PF (Pan Follow): Only the pan axis follows the movement of your hand.
PTF (Pan and Tilt Follow): Both pan and tilt axes follow your hand movement, but the roll axis does not.
FPV (Full Follow): All 3 axes (pan, tilt, and roll) follow your hand movement.
Lock: All 3 axes do not follow your hand movement; the gimbal keeps the camera direction fixed.
FFW (Flash Follow): All 3 axes follow your hand movement at high speed.

5.3 Button Operation

Power button: Long press: Power on/off. Single tap: Wake up. Double tap: Enter sleep mode.
Trigger button: Single tap: Face tracking. Double tap: Recenter. Triple tap: Enter/Exit selfie mode (Pan axis rotates 180°). Press and hold: Enter Lock mode (Release to exit). Function can be customized via App.
Shutter button*: Press halfway: Focus (Feiyu ON App). Single tap (fully): Start/Stop recording / Take photo. Long press (fully): Switch between video/photo mode (Feiyu ON App). *Requires smartphone connection.
L button: Single tap: Turn left continuously. Single tap again: Switch rotating speed (cycles through Slow/Med/Fast; default is Med). Active in auto rotation mode.
Mode button: Single tap: Switch among PF/PTF (Default)/FPV modes. Tap five times: Horizon calibration.
Joystick: Push: Control the movement of the tilt and pan axes.
Auto rotation button: Single tap: Enter auto rotation mode. Single tap again: (1) Exit auto rotation mode (when gimbal is not rotating). (2) Pause rotation (when gimbal is rotating).
R button: Single tap: Turn right continuously. Single tap again: Switch rotating speed (cycles through Slow/Med/Fast; default is Med). Active in auto rotation mode.
F1 button: Double tap: Enter/Exit album (in the Feiyu ON App).
F2 button: Double tap: Enter FFW mode.
FPV button: Single tap: Enter/Exit FPV mode.
Multifunction knob: Turn: (1) Control movement of roll, tilt, and pan axes. (2) Control electronic focus/zoom. Set current control option via knob function switching button.
Knob function switching button: Single tap: (1) Switch control object while controlling 3 axes (Tilt/Pan/Roll). (2) Switch between electronic focus and electronic zoom (Feiyu ON App). Long press: Cycle through control options for Multifunction knob (3 axes movement, electronic focus/zoom).

* For more button function introductions, please refer to the user manual.

5.4 Indicator Lights

[1] Battery indicator A/B/C

[2] Bluetooth indicator

[3] Follow status indicator: TILT = Tilt axis, ROLL = Roll axis, PAN = Pan axis. The indicator being on means the corresponding axis follows user's hand movement.

Bluetooth Indicator Instructions:

Bluetooth status: Bluetooth connected, Bluetooth disconnected, Unpairing Bluetooth*.
Indicator: (Indicator Light Patterns)

*Clear Bluetooth connection: push the joystick down and hold it, then triple tap the power button.

Follow Status Indicator Instructions:

Mode	Follow status indicator (TILT ROLL PAN)
Lock	???
PF	✅❌❌
PTF	✅✅❌
FPV	✅✅✅
FFW	✅✅✅
Auto rotation	???

Battery Indicator Instructions:

Battery level	Indicator (A B C)
Fully charged	???
High level	???
Medium level	???
Low power	???
Low power, will auto power off	???

Other status indicator instruction:

Status	Indicator
Sleep mode	⚫
Initializing	♻️?
Initialization failed	♻️?
Upgrading	??
Upgrade failed	⚡?

Packing List

SCORP-Mini P 1
Tripod 1
USB-C cable 1
Manual 1

6. Specifications

Product name	Feiyu SCORP-Mini P 3-Axis Handheld Gimbal for Smartphone
Product model	FeiyuMP01
Max. Tilt Range	+143° ~ -147° ±3°
Max. Roll Range	+90.4° ~ -199.7° ±3°
Max. Pan Range	360°
Weight	About 683g (not including tripod)
Payload capability	About 520g (Well-balanced)
Battery life	About 11 Hours (Well-balanced)
Charging time	About 1.5 Hours (18W quick charge)
Battery	2200mAh
Operating voltage	6.8V-8.4V
Compatible smartphones	iPhone and Android phones (width: 55~ 88mm)

Notices

1. Make sure motor spinning is not blocked by external force when the product is power on.
2. The product DO NOT contact water or other liquid if it is not marked waterproof or splash-proof. Waterproof and splash-proof products DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassemble the product except marked detachable. It needs to be sent to FeiyuTech after-sales or an authorized service center for repair if accidentally disassembled causing abnormal work. Relevant costs are borne by the user.
4. Prolonged continuous operation may cause the product surface temperature to rise; please operate carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.

Storage and Maintenance

1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources (furnace, heater, etc.) or inside a vehicle on hot days.
3. Please store the product in a dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core. If not using the product for a long time, please charge it at least once within one month.
5. Never use the product when the temperature is too high or too low.

Regulatory Compliance

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Manufacturer Information

Manufactured by: Guilin Feiyu Technology Incorporated Company

Website: www.feiyu-tech.com | www.feiyu-tech.cn

Email: support@feiyu-tech.com

Tel: +86 773-2320865 | 400-990-6118 (China)

This document is subject to change without notice.

Warranty Information

Product Model: Feiyu SCORP-Mini P

Serial Number: (Not provided in text)

Purchase Date: (Not provided in text)

Customer Name: (Not provided in text)

Customer Tel: (Not provided in text)

Customer Email: (Not provided in text)

Warranty:

1. Within one year from the date of selling, the product is malfunctioning under normal use due to non-artificial reasons.
2. The malfunction of the product is not caused by artificial reasons such as unauthorized disassemble or conversion or addition.
3. The buyer is able to provide the certificate of maintenance service: the warranty card, the legitimate receipts, invoices, or screenshot of purchasing.

The following cases are not included under the warranty:

1. Unable to provide legitimate receipt and warranty card with buyer's info.
2. The damage caused by human or irresistible factor.

More details about after-sales policy, please refer to the after-sales page on website: www.feiyu-tech.com/service

Our company reserves the right of final interpretation on the above-mentioned after sales terms and limitations.

	FeiyuTech SCORP Mini P Quick Start Guide A quick start guide for the FeiyuTech SCORP Mini P, a 3-axis handheld gimbal for smartphones. This guide covers overview, getting started, mounting the smartphone, gimbal balancing, operation, button functions, indicators, specifications, and FCC regulatory conformance.
	Feiyu SCORP Mini 3 Pro Gimbal Instructions Comprehensive instructions for the Feiyu SCORP Mini 3 Pro handheld gimbal, covering setup, mounting, balancing, operation, and specifications for camera and smartphone use.
	FeiyuTech SCORP-C Gimbal Stabilizer User Manual Comprehensive user manual for the FeiyuTech SCORP-C 3-axis handheld gimbal stabilizer, covering setup, balancing, operation, app connectivity, and specifications for DSLR and mirrorless cameras.
	FeiyuTech VB 4SE 3-Axis Handheld Gimbal for Smartphone User Manual Comprehensive user manual for the FeiyuTech VB 4SE, a 3-axis handheld gimbal designed for smartphones. This guide covers setup, operation, modes, indicators, specifications, and troubleshooting.
	FeiyuTech SCORP Mini 3 Pro User Manual Comprehensive user manual for the FeiyuTech SCORP Mini 3 Pro handheld gimbal, covering setup, operation, features, and specifications for camera and smartphone stabilization.
	FeiyuTech VB4 3-Axis Handheld Gimbal for Smartphone: User Manual Comprehensive user manual for the FeiyuTech VB4 3-Axis Handheld Gimbal for Smartphones. Covers setup, operation, modes, connection, indicators, specifications, and maintenance for this compact smartphone stabilizer.
	Feiyu SCORP Mini 3 Smartphone Version Instructions This document provides instructions for the Feiyu SCORP Mini 3 Smartphone Version gimbal, covering setup, operation, and specifications.
	FEIYUTECH SPG C: 3-Axis Stabilized Handheld Gimbal for Smartphone - User Manual Comprehensive user manual for the FEIYUTECH SPG C, a 3-axis stabilized handheld gimbal for smartphones. Learn about product overview, installation, balancing, modes, functions, firmware upgrades, and parameters.