Hilti MT-CTR GL OC Operating Instructions

Product: MT-CTR GL OC

Components

Set Components

2x MT-CTR GL OC Set: A U-shaped bracket for mounting.

2x: Hexagonal nuts.

2x: Flat washers.

Extra Components

4x MT-TFB: Metal rods for support.

1x MT-80 / MT-90 / MT-100: Sections of modular channel or rail.

2x M12 / M16 / 1/2" / 5/8": Bolts or screws of various sizes.

Installation Steps

Step 1: Positioning

Description: Position suspension rods with 0mm spacing between them. Observe safety warnings.

Visual Aid: Two vertical rods are shown. A measurement of 0mm is marked between them. An eye icon ?️ and an exclamation mark ❗ indicate caution.

Step 2: Bracket Attachment

Description: Attach a bracket to the modular rail using a bolt and nut.

Visual Aid: A bracket is shown being secured to a modular rail with a bolt and nut.

Step 3: Component Insertion (Clearance Check)

Description: Insert a component into the modular rail, ensuring correct clearance. Minimum spacing of > 10 mm and > 0 mm is required.

Visual Aid: A component is being inserted into the rail. An eye icon ?️ and an exclamation mark ❗ are displayed, along with measurements "> 10 mm" and "> 0 mm" indicating required clearance.

Step 4: Component Insertion (Clearance Check)

Description: Insert another component into the modular rail, ensuring correct clearance. Minimum spacing of > 0 mm is required.

Visual Aid: A component is being inserted into the rail. An eye icon ?️ and an exclamation mark ❗ are displayed, along with a measurement "> 0 mm" indicating required clearance.

Step 5: Securing with Torque

Description: Secure components using specified fasteners and torque values. Incorrect methods are prohibited.

Visual Aid: A component is being attached. A torque table is provided:

Size	Torque
M12	30 Nm
M16	70 Nm
1/2"	30 Nm
5/8"	70 Nm

A prohibition symbol ? is shown next to an example of an incorrect attachment method.

Step 6: Final Assembly

Description: Complete the assembly using MT-TFB components. Use the specified TX50 driver.

Visual Aid: The final assembly is shown with MT-TFB components. A TX50 driver bit symbol is displayed, along with the part number SI-AT-A22.

	Hilti MT-CTR GL OC Installation Guide Installation instructions for the Hilti MT-CTR GL OC system, detailing components, assembly steps, and torque specifications.
	Hilti MT-CTR GS OC System: Installation and Operating Instructions Detailed instructions for installing and operating the Hilti MT-CTR GS OC system, including component lists, assembly steps, and torque specifications.
	Hilti MT-TL M12/M16 Rail System Installation and Specifications This document provides installation instructions and technical specifications for Hilti's MT-TL M12 and M16 rail systems, including crucial clearance measurements and torque values for secure fastening.
	HILTI MT-B-GXL Structural Mounting System Installation Guide Detailed instructions for assembling and installing HILTI MT-B-GXL S1, S2, and S3 structural mounting systems, including component lists and assembly steps.
	Hilti European Technical Assessments: Fire Resistant Solutions for Modular Support Systems Explore Hilti's European Technical Assessments for fire-resistant solutions for modular support systems, including MT System and pipe clamps. Discover innovative and ETA-approved systems for MEP supports under fire conditions, ensuring building safety and structural integrity.
	Hilti MT-TL/MT-ML Series Rail Mounting Installation Guide Comprehensive guide for installing Hilti MT-TL and MT-ML series components on support rails, including step-by-step instructions, clearance requirements, and precise torque specifications for M8, 3/8", and M10 fasteners.
	Hilti MT-FPS SF OC Set and MT-FPS GF OC Set Operating Instructions Comprehensive operating instructions and technical specifications for Hilti MT-FPS SF OC Set and MT-FPS GF OC Set, covering component compatibility, assembly, and installation details for professional use.
	Hilti MT-B-GS AB OC Mounting System Installation Guide Detailed installation instructions for the Hilti MT-B-GS AB OC mounting system, covering various configurations and components for secure and efficient structural assembly.