Hilti MT-FPS SF OC Set and MT-FPS GF OC Set
Operating Instructions and Specifications
Section 1: Component Identification and Compatibility
This section illustrates various Hilti mounting components and their compatibility with different rail systems and pipe clamps.
Diagram 1A: Depicts two Hilti MT-TFB components, each featuring a slotted base plate, two adjustable clamps, and a central connecting piece.
Diagram 1B: Shows a Hilti MT-TFB component attached to a Hilti rail system, illustrating the connection method.
Diagram 1C: Illustrates the Hilti MT-TLB component, a circular clamp for pipes, equipped with a mounting bracket.
Diagram 1D: Displays Hilti MT-FPS-SF and MT-FPS-GF components, which are U-shaped brackets with slots for rail mounting. One diagram indicates a 10mm dimension.
Component Compatibility Table:
| Component | Width | MT-70 / MT-80 S | MT-80 / MT-90 / MT-90H / MT-100 | MT-100 | MT-U-GL1 |
|---|---|---|---|---|---|
| MT-TFB | 50 mm (1 15/16") | A-D | A-D | A-D* | A |
| MT-TFB | 100 mm (3 15/16") | A | A | A* | A |
| MT-TFB | 150 mm (5 7/8") | ||||
| MT-TLB |
*Compatibility without 1-1 connection.
MT-FPS-GF OC Compatibility:
| Component | MP-PS 1-1 | MP-PS 2-2 | MP-PS L4-2 | MP-PS M4-2 | MP-PS H4-2 |
|---|---|---|---|---|---|
| MT-FPS-SF | ok | ok | ok | ok | ok |
| MT-FPS-GF | ok | ok | - | ok | ok |
Section 2A: MT-TFB Assembly
This section shows the MT-TFB component and a screw. A warning symbol [attention] (?️) and an exclamation mark [alert] (❗) indicate the need for careful attention during installation.
The main diagram illustrates two assemblies of MT-FPS-SF/GF components mounted on a Hilti rail system. Each assembly features two pipe clamps attached to the FPS components.
Component Quantities for MT-FPS-SF / MT-FPS GF:
| Component | Quantity | Package Size |
|---|---|---|
| MP-PS x1 - 1x | 4 | 2 pcs |
| MP-PS x2 - 2x | 4 | 2 pcs |
| MP-PS x4 - 2x | 8 | 4 pcs |
Section 2B: MT-U-GL1 Assembly
This section details the Hilti MT-U-GL1 component and its assembly on a rail system.
The diagram shows the MT-U-GL1 component, which is a rail adapter with integrated clamps.
Component Quantities for MT-U-GL1:
| Component | Quantity | Package Size |
|---|---|---|
| MP-PS x1-1x | 4 | 8 |
| MP-PS x2-2x | 4 | 8 |
| MP-PS x4-2x | 0 | - |
The assembly diagram shows the MT-U-GL1 mounted on a Hilti rail. It details the use of specific fasteners: MT-U-GL1 with M10x 25-F bolts and MT-TLB OC with M10-SL OC M10-F bolts. Torque specifications are provided: 20 Nm (14.75 ft-lb) for both.
Warning symbols [attention] (?️) and exclamation marks [alert] (❗) are present, indicating areas requiring attention.
Section 3: MT-U-GL1 Assembly Details
This section provides further details on the assembly of the MT-U-GL1 component on a Hilti rail system.
The diagrams show the MT-U-GL1 mounted on a rail, with close-ups of the fasteners and torque specifications. Similar to Section 2B, the assembly uses M10x 25-F and M10-SL OC M10-F bolts with a torque of 20 Nm (14.75 ft-lb).
Warning symbols [attention] (?️) and exclamation marks [alert] (❗) are included to highlight important installation points.
Section 4: Installation Guidelines and Warnings
This section presents two configurations of the Hilti MT-FPS SF OC Set and MT-FPS GF OC Set mounted on a rail system.
Prohibition symbols [prohibited] (?) are superimposed on these diagrams, indicating incorrect installation methods or usage that should be avoided.
