Pyle Home Audio Amplifier & Wall Mount Speakers User Manual

Pyle Home Mini Audio Amplifier - PFA200

The PFA200 utilizes a Class-T audio amplifier IC, designed for low distortion and acoustically accurate music reproduction. It features tone/direct switching, allowing for customized listening via separate bass and treble adjustments, or the original signal can be passed through without enhancement.

A built-in loudspeaker protection circuit activates when the amplifier is turned on, safeguarding speakers from high volume audio bursts. An over-voltage protection circuit shuts down the amplifier if the input voltage exceeds 14.4 V DC. The amplifier's state-of-the-art design incorporates surface mount components and advanced engineering, ensuring proven performance, reduced signal interference, and a long operational life.

Specifications:

• Input Power: DC 9~14.4V 2A
• Output Power: 60 W
• Speaker Impedance: 2-8 Ohm
• Frequency Response: 20Hz-20kHz
• Total Harmonic Distortion: <0.4%
• SNR: > 80dB

Amplifier Controls & Connections:

The amplifier features a front panel with controls for POWER, MP3 input, TONE (direct/adjust), TREBLE, BASS, and VOLUME. It also includes INPUT and MIC jacks. The rear panel provides connections for Speakers (L/R), RCA L/R outputs, a 1/4" Mic input, and a DC 12V 2.5A power input.

Pyle Compact 3.5" Wall Mount Home Speakers - PLMR24B (Black)

The PLMR24B is a 3-way mini box speaker system, offering 200 watts of power. These weatherproof, marine-grade mount speakers are housed in a heavy-duty ABS enclosure with a grill, suitable for home, boat, poolside, patio, and other indoor/outdoor uses.

Features:

• Dual Passive Speaker System
• Universal Indoor/Outdoor Mountable
• Marine Grade Construction
• Waterproof Rated & Weather-Resistant
• Connect & Stream Audio from External Devices
• 3-Way Full Range Stereo Sound Reproduction
• Bass Reflex Vent for Added Bass Response
• Built-in Capacitor Crossover Network
• Lightweight & Compact Size
• Removable Rustproof Mesh Grills
• Quick Connect/Disconnect Speaker Terminals
• Used for Home, Garage, Yard, Deck, Porch, Patio

Technical Specifications:

• Power: 200 Watt Peak (100 Watt RMS)
• Marine Grade Rating: IP-44
• Subwoofers: 3.5″ Aluminum Injection Cones
• Midranges: 1.75" Wide Dispersion Cones
• Tweeters: 1.0" Superior Domes
• Construction Material: Engineered ABS
• Frequency Response: 70Hz - 21kHz
• Magnet Structure: 24 oz.
• Impedance: 4 Ohm
• Power Supply: 120V (DC 12V Power Adapter)
• Dimensions (L x W x H): 5.25" x 3.75" x 3.75" -Each

What's in the Box:

• (2) Wall-Mount Speakers
• Speaker Wire, 11.5 ft.
• Removable Mounting Brackets

Installation Guide:

Mounting the Bracket

The mounting process involves attaching the speaker bracket to a surface. First, remove the bracket knobs and detach the bracket from the speaker. Hold the bracket against the desired mounting surface, ensuring the speaker wire fits through the large, circular wire hole in the bracket. Align the bracket to be square with the surroundings, using a level for accuracy. Mark the locations of the three screw holes and drill pilot holes into the mounting surface. Gently pull the speaker wire through the wire hole in the center of the mounting bracket, aligning the bracket holes. Finally, use appropriate hardware to attach the bracket securely to the mounting surface.

Final Adjustments

After confirming the speaker is in-phase and functioning correctly, angle the speaker to achieve the best sound. Hand-tighten the bracket knobs only; power tools may overtighten and strip the threads. Ensure the entire installation is safe and secure.

For questions, service, repair, or comments, visit PyleUSA.com/ContactUs.