Product Overview
The Pyle PFA200 is a Class-T audio amplifier IC engineered for low distortion and acoustically accurate reproduction of music.
It features tone/direct switching, allowing for customized listening via separate bass and treble adjustments, or the original signal can be passed through without enhancement.
A built-in loudspeaker protection circuit activates when the amplifier is turned on, safeguarding speakers from high volume audio bursts.
An over-voltage protection circuit automatically shuts down the amplifier if the input voltage exceeds 14.4 V DC.
The amplifier boasts a state-of-the-art design utilizing surface mount components and advanced engineering, ensuring proven performance, reduced signal interference, and a long operational life.
Specifications
- Input Power: DC 9~14.4V 2A
- Output Power: 60 W
- Speaker Impedance: 2-8Ω
- Frequency Response: 20Hz-20kHz
- Total Harmonic Distortion (THD): <0.4%
- Signal-to-Noise Ratio (SNR): >80dB
Controls and Connections
Front Panel Controls
The front panel features a power indicator light, the Pyle logo, and the PFA200 model designation. Controls include:
- Treble Knob: Adjustable from -10 to +10.
- Bass Knob: Adjustable from -10 to +10.
- Volume Knob: Adjustable from 0 to 10.
- MP3 Input: A 3.5mm (1/8") jack for connecting portable audio devices.
- Tone/Direct Switch: Toggles between tone control (bass/treble adjustments) and direct signal pass-through.
Rear Panel Connections
The rear panel provides various input and output options:
- Speaker Outputs: Screw terminals for Left (+) and (-), and Right (+) and (-) speaker connections.
- RCA L/R Inputs: For connecting audio sources.
- Mic Input: A 1/4" jack for microphone connection.
- DC 12V 2.5A Power Input: For connecting the power adapter.
