STRÅLA Star Lamp Assembly Instructions
Safety Information
⚠If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Guide
This guide provides instructions for assembling the IKEA STRÅLA star lamp.
Parts Overview
The package typically includes:
- 1x Main star-shaped lamp shade structure
- 2x Metal support arms/brackets
- 1x Central light fixture housing
- Bulb holders
- Electrical wiring
- Fasteners (washers, nuts)
- Light bulbs (quantity may vary, check product details)
Assembly Steps
- Step 1: Prepare the Star Shade
Unfold the main star-shaped structure. The diagram indicates opening the star and potentially shaping a smaller section.
- Step 2: Attach Support Arms to Shade
Insert the two metal support arms into the designated points on the star shade. Secure them using the provided fasteners (washers and nuts).
- Step 3: Assemble the Light Fixture Base
Assemble the central light fixture component by stacking the provided parts, including washers and a threaded element, and securing them with a nut.
- Step 4: Connect Arms to Fixture Base
Connect the support arms to the central light fixture base. Feed the wires through the base and secure each arm using fasteners. Ensure all connections are firm.
- Step 5: Install Light Bulbs
Screw the light bulbs into the bulb holders located on the support arms.
- Step 6: Mount the Shade onto the Fixture
Carefully place the assembled star shade over the central light fixture, ensuring it fits correctly.
General Advice
If you encounter any difficulties during assembly or are unsure about a step, please refer to the diagrams or contact IKEA for assistance. The initial diagrams illustrate seeking help when uncertain.
