STRÅLA Table Lamp
IKEA
Important Safety Information
If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Instructions
Parts Included
- 1x Ring component
- 1x Smaller ring component
- 1x Base component with lamp holder
Step 1: Prepare Lamp Holder
Screw the base component onto the threaded part of the lamp holder. [Rotate clockwise]
Step 2: Secure Base
Place the base component onto the lamp holder and secure it by pushing down and rotating. [Push down and rotate]
Step 3: Install Light Bulb
Insert the light bulb into the lamp holder and screw it in. [Rotate bulb clockwise]
Step 4: Attach Main Frame
Attach the main frame of the lamp shade to the base component. Align the frame with the slots on the base and push until it clicks into place at two points. [Click!]
Step 5: Install First Ring
Slide the first decorative ring onto the lamp shade structure. [Slide ring into place]
Step 6: Install Second Ring
Attach the second decorative ring to the lamp shade structure. Push until it clicks into place. [Click!]
Step 7: Insert Top Support
Insert the top support structure into the lamp shade. [Push upwards]
Step 8: Secure Top Support
Secure the top support structure by pushing it into place until it clicks. [Click!]
Step 9: Attach Shade Panels
Begin attaching the pleated shade panels to the frame. Insert the edge of a panel into the corresponding slot on the frame. [Info: Gently bend panels to insert]
Step 10: Secure Shade Panels
Continue attaching the pleated shade panels. Push them into place until they click. [Click!]
Step 11: Attach More Panels
Attach more pleated shade panels to the frame. [Info: Gently bend panels to insert]
Step 12: Final Panel Securing
Continue securing the pleated shade panels by pushing them into the frame. [Push panel into frame]
Step 13: Thread Power Cord
Thread the power cord through the center of the lamp shade structure. [Thread cord through opening]
Step 14: Secure Power Cord
Secure the power cord at the top of the lamp shade structure using the provided clips. There are 5 clips. [Secure cord with 5 clips]
