Orbit 1 Dial 1 Outlet Hose Faucet Timer

Important Information

When expecting freezing temperatures, timers should be removed from the hose faucet and stored indoors to avoid potential freeze damage.

Filter

The filter traps dirt particles, prolonging the life of the timer. Clean the filter regularly and replace it if worn.

Timer Features

• DIAL: Rotate the dial to customize your watering schedule.
• RAIN DELAY: Use this button to select RAIN DELAY mode.
• RESET: Press to clear all programming.
• MANUAL: Press to water manually.
• CLEAR: Press to clear programming.
• [+/- buttons]: Use these buttons to adjust time and system setup.
• AUTO: Timer waters according to your customized schedule.
• SET CLOCK: Set the time of day.
• START TIME: Select what time you would like to start watering.
• HOW LONG: Determine how long to water.
• HOW OFTEN: Choose how often you will water.
• OFF: Turn off all watering.

Diagram Description:

The timer unit features a central dial with various settings (OFF, AUTO, SET CLOCK, START TIME, HOW LONG, HOW OFTEN). It has a display screen showing time and settings. There are MANUAL and RAIN DELAY buttons, and [+/- buttons] for adjustments. A CLEAR button is also present. Key components indicated are: FILTER, HOSE TAP CONNECTION, [low battery indicator], and OUTLET 1. A RESET function is also noted.

Installing the Batteries

1. Remove the battery tray on the back of the timer by sliding or pulling it out.
2. Insert two AAA (1.5V) alkaline batteries (not included) and replace the tray.

Note: Firmly replace the battery tray to ensure water resistance and increase battery life. You will know the battery tray is fully inserted if it does not pull out easily. Used up or dead batteries must be removed from the timer and disposed of properly. Replace batteries when the [low battery indicator] appears on the display. Do not dispose of batteries in fire, as they may explode or leak.

Programming the Timer

Set Clock

1. Turn dial to SET CLOCK.
2. Using the [+/- buttons], set the time of day, including AM and PM. The timer advances faster if a button is held down.
3. Turn dial to save changes.

Start Time

1. Turn dial to START TIME.
2. Using the [+/- buttons], set your start time, including AM and PM. The timer advances faster if a button is held down.
3. Turn dial to save changes.

How Long

1. Turn dial to HOW LONG.
2. Using the [+/- buttons], select watering duration from 1 to 360 minutes. The timer advances faster if a button is held down.
3. Press the CLEAR button to reset the run time.
4. Turn dial to save changes.

How Often

1. Turn dial to HOW OFTEN.
2. Using the [+/- buttons], set your watering frequency. You may choose to water every 1 hour, 2 hours, 4 hours, 6 hours, 12 hours, or from 1 to 7 days.
3. Note: '1' means every day, '2' means every other day, etc.
4. Turn dial to save changes.

Congratulations! Your timer is now programmed. Turn your dial to AUTO to allow your timer to water according to the programmed time, station, duration, and frequency.

Additional Features

Rain Delay

Rain delay allows you to postpone watering for a set period of time. To access the rain delay, follow the steps below:

1. With the dial on AUTO, press the button to select a delay of 1 to 7 days.
2. The screen will flash between the clock and hours remaining before the programmed cycle resumes.
3. To remove rain delay, turn the dial to OFF and then back to AUTO.

Manual/Hand Watering

This feature allows you to water without interrupting your set schedule. To access this feature, follow the steps below:

1. With the dial on AUTO, press the MANUAL button.
2. Use the [+/- buttons] to select watering time from 1 to 360 minutes.
3. The screen will flash between the clock and hours remaining before the programmed cycle resumes.

Note: There may be a slight delay between the time the manual button is pressed and when watering begins.

4. To stop manual watering, turn the dial to OFF.
5. Turn the dial back to AUTO to resume your programmed watering schedule.

Troubleshooting

Water Does Not Come On At Desired Time

• Check if: Clock is set to the correct time, including AM and PM.
• Check if: Dial is set to "Auto".
• Check if: Start time is set to the desired time, including AM and PM.
• Check if: Rain Delay is on.

Timer Does Not Water

• Check if: Timer is set to AUTO.
• Check if: Hose faucet is on.
• Check if: Batteries are low.
• Check if: Clock is set to the correct time, including AM and PM.
• Check if: Rain Delay is on.

Water Won't Turn Off

• Check if: HOW LONG is set to the desired time.
• Check if: HOW OFTEN is set to the desired interval hour or day.

Specifications & Warnings

Working Water Pressure:

• Minimum: 10 psi
• Maximum: 100 psi

Working Temperature:

• Maximum: Do not exceed 120°F
• Minimum: Keep from freezing

Warnings:

• For outdoor use with cold water only.
• Not for use with appliances.