Yealink Install and Connect MP54 (E2)

Package Contents

MP54 Phone: The main desk phone unit with keypad and screen.
Handset: The telephone receiver.
Handset Cord: A coiled cable to connect the handset to the phone.
Ethernet Cable (2m CAT5E FTP cable): A network cable for connectivity.
Stand: A support to place the phone on a desk.
Quick Start Guide: A printed booklet with initial setup information.
Power Adapter (Optional): A DC 5V/2A power supply.
Wallmount Bracket (Optional): A bracket for mounting the phone on a wall.

Note

Yealink recommends using only provided or approved accessories. Unapproved third-party accessories may lead to reduced performance.

Assemble MP54 (E2) and Put it on a Table

This section describes assembling the MP54 (E2) phone and placing it on a table. It involves connecting the handset to the phone and placing the phone on its stand.

(Optional) Mount MP54 (E2) on the Wall

Instructions and diagrams are provided for mounting the MP54 (E2) phone on a wall using an optional wallmount bracket.

Step 1: Mount the screws

Yealink provides wall mount drilling templates to mark screw positions on the wall. The placement depends on the standard used.

For American standards:

The wall mount bracket requires screws positioned with a width of 74mm and a height of 98mm. Two screws are needed.

Screw specifications: Maximum screw head diameter of 8mm (0.315"), minimum screw shaft diameter of 6.5mm (0.256"), and maximum screw length of 4.5mm (0.177").

For others:

The wall mount bracket requires screws positioned with a width of 154mm and a height of 72.5mm. Three screws are needed.

Screw specifications: Maximum screw head diameter of 8mm (0.315"), minimum screw shaft diameter of 6.5mm (0.256"), and maximum screw length of 4.5mm (0.177").

Step 2: Attach the wall mount bracket

This step details how to attach the wall mount bracket to the phone. Diagrams show the bracket being secured to the back of the phone.

Step 3: Adjust the hookswitch tab

Instructions are provided for adjusting the hookswitch tab on the handset cradle. This adjustment is typically made to ensure proper phone operation, especially when wall-mounted.

Step 4: Mount the IP phone to the wall

This step shows the final mounting of the IP phone onto the wall using the previously attached bracket.

Connection

The MP54 (E2) phone can be connected using different power and network options.

PC Connection (Optional)

A dedicated port allows for a PC connection, enabling the phone to act as a network switch for the PC.

Power Options:

AC Power Option:

Connect the provided DC 5V/2A power adapter to the phone's power port. The phone can then be connected to the Internet via a router or switch.

PoE (Power over Ethernet) Option:

Connect the phone to an IEEE 802.3af compliant PoE Hub/Switch using an Ethernet cable. This provides both power and network connectivity.

In both connection scenarios, the phone is linked to the Internet, and an optional PC can be connected to the phone's PC port.

	Yealink MP54 E2 Teams IP Phone Datasheet Datasheet for the Yealink MP54 E2, an Android 13-based IP phone optimized for Microsoft Teams, featuring HD audio, a 4-inch touchscreen, and dual-port Gigabit Ethernet.
	Yealink MP52 E2 Smart Business Phone Quick Start Guide Quick start guide for the Yealink MP52 E2 Smart Business Phone, covering package contents, assembly, hardware components, and regulatory information.
	Yealink Smart Business Phone MP54 Quick Start Guide A quick start guide for the Yealink Smart Business Phone MP54, covering package contents, assembly, hardware components, and troubleshooting.
	Yealink MP56 E2 Smart Business Phone - Quick Start Guide This guide provides essential information for setting up and using the Yealink MP56 E2 Smart Business Phone, including package contents, assembly instructions, cable connections, hardware component identification, and compliance details.
	Yealink T55A-Teams Edition Quick Start Guide A concise guide to setting up and using the Yealink T55A-Teams Edition IP phone, covering installation, Microsoft Teams integration, call features, and basic operations.
	Yealink MP56 E2 Teams Datasheet - Enhanced Collaboration Discover the Yealink MP56 E2 Teams Edition IP phone, featuring a 7-inch capacitive touch screen, Optima HD voice, and seamless integration with Microsoft Teams for efficient office collaboration.
	Yealink SIP-T46U Ultra-elegant Gigabit IP Phone Quick Start Guide A quick start guide for the Yealink SIP-T46U Ultra-elegant Gigabit IP Phone, covering package contents, assembly, setup, configuration, basic call features, customization, and regulatory information.
	Yealink MP56, T58A, T56A Teams Edition User Guide Comprehensive user guide for Yealink MP56, T58A, and T56A Teams Edition phones. Learn about hardware features, accessing screens, managing calls, contacts, meetings, and troubleshooting.