ZEALOT S97 Wireless Speaker Quick Start Guide
Model: S97
Brand: ZEALOT
Packing Content
The package includes:
- ZEALOT S97 Wireless Speaker
- USB-C Charging Cable
- Quick Start Guide
Getting Started
Power On/Off
Press and hold the [Power Button] for more than 2 seconds to turn the speaker on or off.
Wireless Connection
To connect your device via Bluetooth:
- Turn on Bluetooth on your phone and search for "ZEALOT-S97".
- Select "ZEALOT-S97" to connect. The indicator light will show connection status.
Diagram Description: Shows a phone screen with Bluetooth settings and the speaker with a flashing indicator light, then a solid light upon connection.
Mode Switch
The speaker supports multiple input modes:
- Wireless (Bluetooth)
- USB
- TF (MicroSD card)
- AUX (3.5mm audio input)
Diagram Description: Icons representing Wireless, USB, TF card, and AUX input.
Play Control
Control your music playback:
- Play/Pause: Press the Play/Pause button [▶️/⏸️].
- Volume Up: Press and hold the Volume Up button [➕?].
- Volume Down: Press and hold the Volume Down button [➖?].
- Next Track: Press the Next Track button [⏭️].
- Previous Track: Press the Previous Track button [⏮️].
Diagram Description: Shows icons for Play/Pause, Volume Up/Down, and Track Skip with associated button presses.
PartyADD Mode (Pairing Two Speakers)
Connect two ZEALOT S97 speakers for stereo sound:
- Ensure both speakers are turned on and within 1 meter of each other.
- Press the [?] button on both speakers simultaneously. A prompt tone will indicate successful pairing.
- Connect your phone to one of the speakers via Bluetooth (ZEALOT-S97).
- Music will play from both speakers.
Diagram Description: Illustrates two speakers placed near each other, with an indicator showing the connection process.
Equalizer (EQ)
Adjust the sound profile:
- Bass Boost: Press the [EQ Button] once.
- Voice Mode: Press the [EQ Button] twice.
- Normal Mode: Press the [EQ Button] three times.
Diagram Description: Shows icons representing Bass, Voice, and Normal sound modes.
Charging
Connect the USB-C cable to the [USB-C Port] to charge the speaker. The battery indicator [?] will show charging status.
Diagram Description: Shows the USB-C port and a battery icon indicating charging.
Technical Specifications
| Feature | Specification |
|---|---|
| Wireless Version | 5.2 |
| Charging Voltage | DC5V 2A |
| Working Voltage | 7.4V |
| Transmission Distance | 10m |
| Frequency Range | 20Hz-20KHz |
| Speaker Size | Φ76mm*2 + Φ38mm*2 |
| SNR (Signal-to-Noise Ratio) | ≥90dB |
| Distortion | <1% |
| Weight | 2.8kg |
| Dimensions | 321*151*185mm |
Important Warnings & Safety Information
To ensure correct and trouble-free operation, please read this user manual carefully.
- For the first use, a full charge is recommended.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, or direct sunlight.
- Keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to enter the product.
- Do not disassemble or modify the product structure or any of its parts.
- If the battery is not replaced correctly, an explosion accident may occur. Only the same type of battery can be used for replacement.
- Batteries (battery packs) must not be exposed to conditions such as sunlight, fire, or similar overheating conditions.
- Do not throw or drop the product to avoid damage.
- Keep out of reach of children.
Hazardous Substances Information
In accordance with Chinese regulations for the management of pollution control for electronic information products.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr6+) | PBB (Polybrominated Biphenyls) | PBDE (Polybrominated Diphenyl Ethers) |
|---|---|---|---|---|---|---|
| Printed Circuit Board | X | ○ | ○ | ○ | ○ | ○ |
| User Manual | ○ | ○ | ○ | ○ | ○ | ○ |
| Plastic and Polymer Parts | ○ | ○ | ○ | ○ | ○ | ○ |
| Standard Battery | X | ○ | ○ | ○ | ○ | ○ |
Notes:
- '○' indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit requirements specified in SJ/T11363-2006.
- 'X' indicates that the content of the hazardous substance is above the limit requirements specified in SJ/T11363-2008 for at least one homogeneous material of this part.
- Parts marked with 'X' comply with the EU RoHS directive (2002/95/EC).
The service life of environmentally hazardous substances in this product is 10 years. These substances will not leak or cause environmental pollution or cause serious damage to human bodies or property under normal operating conditions.
Certifications
This product may be certified by:
- CE
- FCC
- RoHS
- CCC (for power adapters)
Model Number: ZA-S97-20240521
Made in China
