Packing Content
- [USB-C cable]
Power Operations
Power On/Off
Press the [Power button] to turn the speaker on or off.
Battery Indicator
- 80%-100%: [Green light on]
- 40%-70%: [Yellow light on]
- Below 30%: [Red light on]
Wireless Connection
Pairing a Single Device
- Turn on your phone's wireless and remove "ZEALOT-ZE01" from the wireless list if previously connected.
- Turn on the speaker.
- On your phone, search for "ZEALOT-ZE01" in the wireless list and connect.
- Once connected, you can play music.
PartyAdd (TWS) Connection
This feature allows connecting two ZEALOT-ZE01 speakers for stereo sound.
- Ensure both speakers are turned on and within 1 meter of each other.
- Click the [Connect button] on either speaker. A prompt tone indicates successful pairing between the speakers. Subsequent connections will be automatic when both speakers are powered on.
- After the speakers are paired, turn on your phone's wireless and connect to "ZEALOT-ZE01".
- Play music to test if both speakers are playing simultaneously.
Note: To disconnect the current wireless connection on a speaker, long-press the [Disconnect button].
Playback Controls
The primary playback controls are typically managed via your connected device (phone, tablet, etc.). Common functions include:
- Play/Pause: Usually controlled by a dedicated button or via your connected device.
- Volume Control: Adjust volume on your connected device or the speaker itself if it has dedicated volume buttons.
- Skip Track: Usually controlled by your connected device.
Light Control
Press the [Light ON/OFF button] to toggle the speaker's lighting.
Sound Modes
The speaker offers different sound modes:
- [Bass mode]: Indicated by [Green light on].
- [Vocal mode]: Indicated by [Orange light on].
- [Normal mode]: Default mode.
Charging
For optimal performance, it is recommended to fully charge the speaker before its first use. Connect the included [USB-C cable] to the speaker and a suitable power source.
Technical Specifications
| Specification | Value |
|---|---|
| Wireless Version | 5.3 |
| Charging Voltage | DC 5V |
| Working Voltage | 11.1V |
| Transmission Distance | 10m |
| Frequency Range | 20Hz-20KHz |
| Speaker | 120mm*2 + 42mm*2 |
| SNR (Signal-to-Noise Ratio) | 90dB |
| Distortion | 1% |
| Weight | 5.3kg |
| Size | 332*207*284mm |
Safety Warnings
To ensure correct use and trouble-free operation, please read the following warnings carefully:
- For first-time use, a full charge is recommended.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, or direct sunlight.
- Maintain moderate speaker volume to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or other chemicals to clean the product.
- Prevent small particles from entering the product.
- Do not disassemble or modify the product's structure or any part thereof.
- If the battery is not replaced correctly, there is a risk of explosion; only the same battery type can be used for replacement.
- The battery pack must not be exposed to sunlight, fire, or similar overheating conditions.
- Do not throw or drop the product to avoid damage.
Compliance and Certifications
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation.
CCC Certification
If using a power adapter for charging, ensure it is CCC certified and meets required standards.
Environmental Compliance
This product complies with relevant environmental standards. It is free from hazardous substances such as Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr 6+), Polybrominated Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE) above threshold levels, indicated by the absence of 'x' marks next to them in the compliance table, and signifies a 10-year period of hazardous substance free use.
USB PD Fast Charging
For maximum charging speed, the power delivered by the charger should be between a minimum of 15 Watts and a maximum of 45 Watts.
