Zealot S97 Wireless Speaker
Quick Start Guide
Technical Specifications
Wireless Version: V5.2
Charging Voltage: DC5V 2A
Working Voltage: 7.4V
Transmission Distance: 10m
Frequency Range: 20Hz-20KHz
Speaker: Φ76mm*2 + Φ38mm*2
SNR (Signal-to-Noise Ratio): ≥90dB
Distortion: <1%
Weight: 2.8kg
Size: 321*151*185mm
Wireless Connection (PARTYADD)
Description: Connect two Zealot S97 speakers for a stereo experience.
- Ensure both machines are turned on and within 1 meter of each other.
- Simultaneously click the PARTYADD button [▶️] on both machines. A prompt tone indicates successful pairing. A second prompt tone indicates successful connection.
- On your phone's wireless list, ensure "ZEALOT-S97" is not connected.
- Turn on your phone's wireless and wait for the "ZEALOT-S97" signal to appear. Connect to it.
- Play music to test if both speakers are playing simultaneously.
Note: After the first connection is successful, subsequent connections will be automatic.
Controls
- Mode Switch: Press the MODE button [X1] to switch modes.
- Play Control: Use the PLAY button [▶️] for play/pause. Press and hold for more than 2 seconds [>2] to skip to the next track.
- Equalizer: Press the EQUALIZER button [X1] to cycle through sound modes: Bass (Green light [?]), Vocal (Orange light [?]), Normal.
- Light Mode: Long press the LIGHT button [X1] to turn the light effects on/off.
- Power: Press and hold the POWER button [ON/OFF] for more than 3 seconds [>3] to turn the speaker on/off.
Battery Indicator
The battery indicator light shows the remaining battery level:
- 80%-100%: Green light is on [?]
- 40%-70%: Yellow light is on [?]
- ≤ 30%: Red light is on [?]
Charging
Connect the included USB-C cable to charge the speaker. If using a power adapter, ensure it is CCC certified and meets required standards.
Packing Content
- Zealot S97 Wireless Speaker
- USB-C Cable
- Quick Start Guide
Important Safety Information (Warnings)
General Precautions:
- Read the user manual carefully before use.
- Fully charge the device for the first use.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, or direct sunlight.
- Avoid dropping or throwing the product to prevent damage.
- Keep the speaker volume at a moderate level to avoid hearing damage.
- Do not use organic solvents or chemicals for cleaning.
- Prevent small particles from entering the product.
- Do not disassemble or modify the product.
- Keep the product out of reach of children.
- If replacing the battery, use only the same type of battery. Incorrect replacement can cause an explosion.
- Batteries should not be exposed to conditions like direct sunlight, fire, or similar overheating.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
有害物质含量表 (Table of Hazardous Substances Content)
This table indicates the presence of hazardous substances in the product's components as per Chinese regulations.
Component Name | Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | PBB | PBDE | Cr6+ (Hexavalent Chromium) |
---|---|---|---|---|---|---|
Printed Circuit Board | × | o | o | o | o | o |
Plastic and Polymer Parts | 6+ | × | o | o | o | o |
Standard Battery | × | o | o | o | o | o |
User Manual | o | o | o | o | o | o |
Notes:
- 'o' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006.
- 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in SJ/T 11363-2008.
- Components marked with 'X' comply with EU Directive 2002/95/EC on the restriction of hazardous substances in electrical and electronic equipment.
The period during which the toxic or harmful substances or elements contained in this electronic information product will not leak, cause pollution to the environment, or cause serious damage to human or property under the conditions of use described in the manual is 10 years.
Update Log
- 20240103: Added Italian language.
- 20240625: Added battery indicator, light effect switch, FCC compliance, and EQ modifications.