eufy Security Floodlight Cam E340 User Guide

What's in the Box

• 1. Floodlight Cam E340 (Model: T8425)
• 2. USB Cable (For Quick Setup Only)
• 3. Mounting Bracket (Pre-installed on Camera)
• 4. Positioning Sticker
• 5. Installation Hook
• 6. Wall Screws (Bag A)
• 7. Base Screws (Bag B)
• 8. Bracket and Earth Screws (Bag C)
• 9. Warning Sticker
• 10. Quick Start Guide

What You Need (Not Provided)

• 1. #2 or #1 Phillips Crosshead Screwdriver
• 2. 5V/1A USB Power Adapter
• 3. Ladder (If necessary)

At a Glance

The floodlight camera has the following components:

• 1. Floodlight: Provides illumination.
• 2. Speaker: For audio output.
• 3. Motion Sensor Component: Detects movement.
• 4. System Indicator: Shows the status of the device.
• 5. Telephoto Camera: For detailed viewing.
• 6. Wide Angle Camera: For a broader field of view.
• 7. Infrared Component: For night vision.
• 8. Power Input (For Quick Setup): USB-C port for initial power.
• 9. SYNC Button: Used for pairing and synchronization.
• 10. microSD Card Slot: For local storage of recordings. Insert a microSD card (not provided) to store recordings. *Use at least a Class 10 microSD card with a maximum of 128 GB.
• 11. Mounting Bracket: The bracket that attaches to the wall/ceiling.
• 12. Mounting Base: The part that attaches to the bracket and holds the camera.

Setting Up the System

1. Download and install the eufy Security app from [App Store] or [Google Play]. Sign in or create an account.
2. Power on the floodlight camera using the USB-C charging cable and a 5V/1A power adapter (not provided).
   • To avoid scratching the camera, do not peel off the protective film for the time being.
   • The floodlights will only operate when connected to wired power. The USB connection is for initial setup inside your home.
   • Ensure you can stream video from your floodlight camera via the app BEFORE proceeding with installation.
3. Tap the '+' icon in the app and follow the on-screen instructions to add the camera.
4. Once setup is complete, disconnect the camera from the power adapter and close the USB port cover securely to prevent water ingress.

Preparing for Installation (Important)

Check Local Laws for Installation

If you are outside of North America, installation and wiring must be performed by a licensed electrician. Always follow code standards when installing wired connections.

Shut Power Off at the Breaker

⚠️ Risk of Electrical Shock: Turn off the power at your circuit breaker or fuse box before continuing installation. Consult with a licensed electrician if needed.

• Switch the lights on and off to confirm the electricity to the installation area is shut off.
• Verify the power supply is a 100~240 VAC 50/60 Hz source.
• Keep the breaker off throughout the installation process.

NOTE: Do not use a dimmer switch or timer for this product.

A WARNING: Ensure the power is OFF.

Installing Your Floodlight Camera

Separate the Mounting Bracket

Separate the mounting bracket from the camera and set it aside for later installation.

Select a Location

You can mount the floodlight camera vertically on a wall or hang it from a ceiling. With the power off at the breaker, remove any existing floodlight if present.

Wall Mounting: Standard wall installation.

Overhang Mounting: For overhang mounting, reinstall the mounting base first.

Recommended Height

eufy recommends mounting the camera 8 ft (2.44 m) above the ground to achieve an optimal motion detection range of up to 40 ft (12 m).

Install the Mounting Bracket

Wall Mounting:

1. Run the existing wires through the hole of the junction box.
2. Hold the mounting bracket onto the junction box, align the screw holes, remove any foam from the holes, and then secure the mounting bracket to the wall or ceiling using the Bracket Screws (Bag C).

Overhang Mounting:

1. Run the existing wires through the hole of the junction box.
2. Align the screw holes and secure the mounting bracket to the junction box or mounting plate using the Bracket Screws (Bag C).

Connect Wires

1. Hang your camera on the bracket using the provided hook while connecting the wires.

2. Connect the junction box's ground wire (bare copper / green / green & yellow), live wire (black), and neutral wire (white) to the floodlight camera's corresponding wires (green & yellow, black, and white) using wire connectors. Secure the connections with a screwdriver.

• If the existing ground wire is already connected to the junction box, or if there is no ground wire, connect the floodlight camera's ground wire directly to the junction box or mounting plate.
• Important: Never cross-connect wires. Ensure wires are connected with matching colors.
• If you encounter issues with the floodlight camera's operation, consult a licensed technician.

Place the Camera on the Mounting Bracket

1. Remove the hook. Snap the mounting base onto the mounting bracket, align the holes, and secure it with 2 Base Screws (Bag B).
2. Remove the label and protective film from the floodlight. Clean the camera lens with a lens cleaning cloth.

Adjusting the Lighting Angle

Manually pull the floodlight up and down or left and right to adjust its vertical or horizontal angle.

Restoring Power

1. Switch on the main circuit breaker in the house.

If the floodlight camera is not powered on, switch off the circuit breaker again before checking the wiring. For troubleshooting, refer to the Help section in the eufy Security app.

2. You can now access various features and change settings in the eufy Security app.

LED Light Guide