SFA Sanivite/Sanipump 2 Installation Guide

Product Overview

The SFA Sanivite/Sanipump 2 is a macerator pump designed for efficient waste removal. This guide provides comprehensive instructions for its installation and operation.

Installation Diagrams and Instructions

The following diagrams illustrate the installation process:

Diagram 1: Inlet Connections

Shows various inlets for waste water, including sinks and washing machines, connecting to the Sanivite/Sanipump 2 unit. Arrows indicate the flow of wastewater.

Diagram 2: Outlet and Venting

Illustrates the connection of the discharge pipe (Ø 40mm Ext) and the necessary venting for proper operation. It highlights correct and incorrect connection methods.

Diagram 3: Step-by-Step Assembly

Details the assembly of the unit, including the connection of pipes and accessories. Key components are labeled with letters (A-H) and quantities.

Components:

• A: Elbow connector (x1)
• B: Hose clamps (x8)
• C: Reducer (32x55) (x1)
• D: Adapter (25x32) (x2)
• E: Pipe connectors (x3)
• F: Mounting brackets (x2)
• G: Cover (x4)
• H: Screws (x2)

Diagram 4: Pipe Installation

Shows the correct routing and connection of the discharge pipe, emphasizing a 3% gradient for gravity assistance. Maximum vertical lift is indicated.

Diagram 5: Connecting Discharge Pipe

Details the connection of the Ø 40mm discharge pipe using the provided connectors (E) and clamps (B).

Diagram 6: Securing the Unit

Illustrates how to secure the unit using mounting brackets (F) and screws (H).

Diagram 7: Final Unit Placement

Shows the fully installed unit, ready for operation.

Diagram 8: Minimum Installation Height

Indicates a minimum installation height of 15 cm from the floor for the discharge pipe connection.

Diagram 9: Performance Curve

A graph showing the relationship between flow rate (Q L/min) and head (H m), indicating the pump's performance characteristics.

Diagram 10: Discharge Pipe Lengths

Illustrates maximum recommended discharge pipe lengths for different vertical lifts.

Technical Specifications

The Sanivite/Sanipump 2 is designed to handle wastewater from various sources. Key specifications include:

• Model: V35
• Standard Compliance: EN 12050-2
• Maximum Temperature: 60°C (for 5 minutes per hour)
• Voltage: 220-240V
• Frequency: 50-60Hz
• Power Consumption: 400W
• Current: 1.7A
• IP Rating: IP44
• Weight: 6.4 kg

Manufacturer and Service Information

SFA provides support and service through its global network of subsidiaries and distributors. Contact details for various regions are provided:

• France: SOCIÉTÉ FRANÇAISE D'ASSAINISSEMENT
• Germany: SFA SANIBROY GmbH
• United Kingdom: SANIFLO Ltd.
• Italy: SFA ITALIA spa
• Spain: SFA S.L.
• Australia: SANIFLO (Australasia) Pty Ltd
• Ireland: SANIRISH Ltd
• Portugal: SFA, Lda.
• Russia: SFA РОССИЯ
• Switzerland: SFA SANIBROY AG
• Benelux: SFA BENELUX B.V.
• Sweden: SANIFLO AB
• Poland: SFA POLAND Sp. z 0.0.
• Czech Republic: SFA-SANIBROY, spol. s r.o
• Romania: SFA SANIFLO S.R.L.
• Turkey: SFA SANIHYDRO LTD STI
• China: SFA 中国
• Korea: www.SFA.biz
• South Africa: Saniflo Africa (PTY) Ltd
• Brazil: SFA Brasil Equipamentos Sanitários

For service inquiries, please refer to the contact numbers provided in the document or visit www.sfa.biz.